Get Lighting -> Exterior lighting Guide for Vauxhall Corsa 4 Door First Generation (2014-2019)

112

Lighting

Exit lighting .............................. 120

Battery discharge protection .... 121

Exterior lighting

Light switch

Lighting

Exterior lighting .......................... 112

Light switch .............................. 112

Automatic light control ............. 113

High beam ............................... 114

Headlight flash ......................... 114

Headlight range adjustment .... 114

Headlights when driving

abroad .................................... 114

Daytime running lights ............. 115

Xenon lighting system ............. 115

Hazard warning flashers .......... 116

Turn and lane-change signals . 117

Front fog lights ......................... 117

Rear fog light ........................... 117

Parking lights ........................... 118

Reversing lights ....................... 118

Misted light covers ................... 118

Turn light switch:

7

: lights off

8 : sidelights

9 : headlights

Interior lighting ........................... 118

Control indicator 8 3 95.

Instrument panel illumination

control ..................................... 118

Interior lights ............................ 119

Reading lights .......................... 120

Lighting features ........................ 120

Entry lighting ............................ 120

Lighting

113

A status message in the Driver

Information Centre indicates the

current status of the automatic light

control.

When switching on the ignition,

automatic light control is active.

When headlights are on, 8

illuminates. Control indicator 8

3 95.

When the automatic light control

function is switched on and the

engine is running, the system

switches between daytime running

light and headlights automatically

depending on the lighting conditions

and information given by the rain

sensor system.

Light switch with automatic light

control

Daytime running light 3 115.

Automatic headlight activation

Tail lights

During poor lighting conditions the

headlights are switched on.

Tail lights are illuminated together

with headlights and sidelights.

Furthermore the headlights are

switched on if the windscreen wipers

have been activated for several

wipes.

Turn light switch:

Automatic light control

AUTO : automatic light control:

headlights are switched on

and off automatically

Tunnel detection

When a tunnel is entered, the

headlights are switched on

immediately.

depending on external

lighting conditions

m

: activation or deactivation of

the automatic light control.

Switch turns back to AUTO

: sidelights

8

9

: headlights

114

Lighting

High beam

Headlight range adjustment Headlights when driving

abroad

Manual headlight range

The asymmetrical headlight beam

adjustment

extends visibility at the edge of the

road at the passenger side.

However, when driving in countries

where traffic drives on the opposite

side of the road, adjust the headlights

to prevent dazzling of oncoming

traffic.

To switch from low to high beam,

push lever.

To switch to low beam, push lever

To adapt headlight range to the

vehicle load to prevent dazzling: turn

thumb wheel ? to required position.

again or pull.

High beam assist 3 115.

0 : front seats occupied

Headlight flash

1 : all seats occupied

2 : all seats occupied and load

compartment laden

3 : driver's seat occupied and load

compartment laden

To activate the headlight flash, pull

lever.

There are two adjuster elements on

each headlight housing.

Turn both adjuster elements on each

headlight housing ¹/₂turn with a

size six hexagon key anticlockwise to

Lighting

115

set to right-hand traffic mode.

Therefore, insert the key in the guide

as shown in the illustration.

Alternatively, a Phillips head

screwdriver size three can be used for

setting.

It switches automatically to low beam

when:

Xenon lighting system

Xenon lighting system includes:

●

The camera in the windscreen

detects the lights of oncoming or

preceding vehicles.

●

xenon headlights for low and high

beam

●

high beam assist

corner lighting

reversing function

●

The vehicle speed drops below

12 mph.

To reset to left-hand traffic mode, turn

adjuster elements ¹/₂turn clockwise.

●

It is foggy or snowy.

Driving in urban areas.

Xenon headlights

Xenon headlights for low and high

beam ensure better visibility under all

conditions.

Operation is the same as for halogen

headlights.

Light switch 3 112, high beam 3 114,

headlight flash 3 114, headlight range

adjustment 3 114, headlights when

driving abroad 3 114.

Daytime running lights

If there are no restrictions detected,

the system switches back to high

beam.

Daytime running light increases

visibility of the vehicle during daylight.

They are switched on automatically

when ignition is on.

Versions with automatic light control

The system switches automatically

between daytime running light and

headlights, depending on the lighting

conditions and information given by

the rain sensor system. Automatic

light control 3 113.

Activation

Automatic light control 3 113.

High beam assist

This feature allows high beam xenon

lights to function as the main driving

light at night and when vehicle speed

exceeds 25 mph.

116

Lighting

The high beam assist is activated by

pushing the indicator lever twice at a

speed above 25 mph.

Corner lighting

Hazard warning flashers

The green control indicator l

illuminates continuously when the

assist is activated, the blue one 7

illuminates when high beam is on.

Control indicator l 3 95.

On tight bends or when turning off,

depending on the steering angle or

the indicator light signal, an additional

left or right reflector is switched on

which illuminates the road in the

direction of travel. It is activated up to

a speed of 25 mph.

Deactivation

Push indicator lever once. It is also

deactivated when front fog lights are

switched on.

If a headlight flash is activated when

the high beam is on, the high beam

assist will be deactivated.

If a headlight flash is activated when

the high beam is off, the high beam

assist will remain activated.

The latest setting of the high beam

assist will remain after the ignition is

switched on again.

Operated by pressing ¨.

In the event of an accident with airbag

deployment, the hazard warning

flashers are activated automatically.

Reversing function

If the low beam is on and reverse gear

is engaged, both corner lights are

switched on. They remain illuminated

for 20 seconds after disengaging

reverse gear.

Lighting

117

With a trailer connected, turn signal

flashes six times and tone frequency

changes when pressing the lever until

resistance is felt and then releasing.

Turn and lane-change

signals

Rear fog light

Move the lever to the resistance point

and hold for longer indication.

Switch the turn signal off manually by

moving the lever to its original

position.

Front fog lights

Operated by pressing r.

lever up

: right turn signal

Light switch in position AUTO:

switching on rear fog light will switch

on headlights automatically.

lever down : left turn signal

If the lever is moved past the

resistance point, the turn signal is

switched on constantly. When the

steering wheel moves back, the turn

signal is automatically deactivated.

For three flashes, e.g. when changing

lanes, press the lever until resistance

is felt and then release.

Operated by pressing >.

Light switch in position AUTO:

switching on front fog lights will switch

the low beam on automatically.

Lighting -> Exterior lighting for Your Vauxhall Corsa 4 Door First Generation (2014-2019)

Related Topics

Lighting

Popular Owner Manuals

Latest Owner Manuals