Service and maintenance for Your Vauxhall Corsa 4 Door First Generation (2014-2019)

234  
Service and maintenance  
Andorra, Austria, Belgium, Bosnia-  
Herzegovina, Bulgaria, Croatia,  
Cyprus, Czech Republic, Denmark,  
Estonia, Finland, France, Germany,  
Greece, Greenland, Hungary,  
Iceland, Ireland, Italy, Latvia,  
Liechtenstein, Lithuania,  
General information  
Service and  
maintenance  
Service information  
In order to ensure economical and  
safe vehicle operation and to  
maintain the value of your vehicle, it  
is of vital importance that all  
General information ................... 234  
Service information .................. 234  
Luxembourg, Macedonia, Malta,  
Monaco, Montenegro, Netherlands,  
Norway, Poland, Portugal, Romania,  
San Marino, Serbia, Slovakia,  
Slovenia, Spain, Sweden,  
maintenance work is carried out at the  
Recommended fluids, lubricants  
and parts .................................... 235  
Recommended fluids and  
proper intervals as specified.  
The detailed, up-to-date service  
schedule for your vehicle is available  
at the workshop.  
lubricants ................................ 235  
Switzerland, United Kingdom.  
Service display 3 86.  
Service display 3 86.  
International service intervals  
European service intervals  
Maintenance of your vehicle is  
required every 10,000 miles or after  
one year, whichever occurs first,  
unless otherwise indicated in the  
service display.  
Maintenance of your vehicle is  
required every 20,000 miles or after  
one year, whichever occurs first,  
unless otherwise indicated in the  
service display.  
The international service intervals are  
valid for the countries which are not  
listed in the European service  
intervals.  
A shorter service interval can be valid  
for severe driving behaviour, e.g. for  
taxis and police vehicles.  
The European service intervals are  
valid for the following countries:  
Service display 3 86.  
Service and maintenance  
235  
Dexos is the newest engine oil quality  
that provides optimum protection for  
petrol and diesel engines. If it is  
unavailable, engine oils of other listed  
qualities have to be used.  
Recommendations for petrol engines  
are also valid for Compressed Natural  
Gas (CNG), Liquified Petroleum Gas  
(LPG) and Ethanol (E85) fuelled  
engines.  
Select the appropriate engine oil  
based on its quality and on the  
minimum ambient temperature  
3 239.  
Confirmations  
Recommended fluids,  
lubricants and parts  
Confirmation of service is recorded in  
the Service and Warranty Booklet.  
The date and mileage is completed  
with the stamp and signature of the  
servicing workshop.  
Make sure that the Service and  
Warranty Booklet is completed  
correctly as continuous proof of  
service is essential if any warranty or  
goodwill claims are to be met, and is  
also a benefit when selling the  
vehicle.  
Recommended fluids and  
lubricants  
Only use products that meet the  
recommended specifications.  
9 Warning  
Operating materials are  
hazardous and could be  
poisonous. Handle with care. Pay  
attention to information given on  
the containers.  
Service interval with remaining  
engine oil life duration  
The service interval is based on  
several parameters depending on  
usage.  
The service display lets you know  
when to change the engine oil.  
Service display 3 86.  
Topping up engine oil  
Engine oils of different manufacturers  
and brands can be mixed as long as  
they comply with the required engine  
oil quality and viscosity.  
Engine oil  
Engine oil is identified by its quality  
and its viscosity. Quality is more  
important than viscosity when  
selecting which engine oil to use. The  
oil quality ensures e.g. engine  
cleanliness, wear protection and oil  
aging control, whereas viscosity  
grade gives information on the oil's  
thickness over a temperature range.  
Use of engine oil with only  
ACEA A1/B1 or only A5/B5 quality is  
prohibited, since it can cause long-  
term engine damage under certain  
operating conditions.  
Select the appropriate engine oil  
based on its quality and on the  
minimum ambient temperature  
3 239.  
236  
Service and maintenance  
Additional engine oil additives  
The use of additional engine oil  
additives could cause damage and  
invalidate the warranty.  
northern countries with very low  
temperatures the factory filled coolant  
provides frost protection down to  
approx. -37 °C. This concentration  
should be maintained all year round.  
The use of additional coolant  
additives that intend to give additional  
corrosion protection or seal against  
minor leaks can cause function  
problems. Liability for consequences  
resulting from the use of additional  
coolant additives will be rejected.  
Engine oil viscosity grades  
The SAE viscosity grade gives  
information of the thickness of the oil.  
Multigrade oil is indicated by two  
figures, e.g. SAE 5W-30. The first  
figure, followed by a W, indicates the  
low temperature viscosity and the  
second figure the high temperature  
viscosity.  
Brake and clutch fluid  
Over time, brake fluid absorbs  
moisture which will reduce braking  
effectiveness. The brake fluid should  
therefore be replaced at the specified  
interval.  
Select the appropriate viscosity grade  
depending on the minimum ambient  
temperature 3 239.  
All of the recommended viscosity  
grades are suitable for high ambient  
temperatures.  
Coolant and antifreeze  
Use only silicate-free long life coolant  
(LLC) antifreeze. Consult a  
workshop.  
The system is factory filled with  
coolant designed for excellent  
corrosion protection and frost  
protection down to approx. -28 °C. In