Get Storage -> Load compartment Guide for Vauxhall Corsa 4 Door First Generation (2014-2019)

Storage

67

Push the clamping lever down and

pull both lamp supports out of the

recesses.

Load compartment

Load compartment extension

The rear backrest can be locked in

two positions. When transporting

bulky items, lock in an upright

position.

Push the release lever up and hold.

Lift the system slightly and push it into

the bumper until it engages.

Release lever must return to original

position.

Fold in the lamp supports on the

backs of the tail lamps.

First place the front tail lamp (1), then

the rear tail lamp (2) in the recesses

and push down as far as possible.

Push cables all the way into all guides

in order to prevent damage.

9 Warning

If the system cannot be correctly

engaged, please seek the

assistance of a workshop.

Split backrest

Pull the release handle on the

relevant side, pull the backrest

forwards to the vertical position and

engage.

Open the tailgate.

Single-unit backrest

68

Storage

Pull the release handle on both sides,

pull the backrest forwards to the

vertical position and engage.

Guide the seat belts through side

supports to protect them against

damage. When folding the backrest,

pull the seat belts along with it.

If the vehicle is to be loaded via a rear

door, take the seat belt out of the seat

backrest guide and insert the latch

plate in the recess as shown in the

illustration.

To fold up, raise the backrest and

guide it into an upright position until it

engages audibly.

When unlocking, a red marking

appears next to the release lever. The

backrest is properly engaged when

the red marks on both sides near the

release lever are no longer visible.

Split backrest

Pull the release handle on the

relevant side and fold it down onto the

seat cushion.

Ensure that the seat belts of the

outboard seats are placed in the

corresponding belt guides.

Single-unit backrest

Folding down rear backrests

Remove load compartment cover as

necessary.

Push head restraints down by

pressing the catch.

Pull the release handle on both sides

and fold it down onto the seat

cushion.

The backrest is properly engaged

when the red marks on both sides

near the release lever are no longer

visible.

Storage

69

Fitting

Load compartment cover

9 Warning

Engage cover in side guides and fold

downwards. Attach retaining straps to

tailgate.

Do not place any objects on the cover.

Only drive the vehicle when the

backrests are securely locked into

position. Otherwise there is a risk

of personal injury or damage to the

load or vehicle in the event of hard

braking or a collision.

3-door/5-door hatchback

Removing

Delivery van

The load compartment cover consists

of four segments which can be

individually removed and inserted.

Removing

Unhook retaining straps from tailgate.

Lift cover at the rear and push it

upwards at the front.

Remove the cover.

The seat belt of the centre seat could

be blocked when the backrest is

folded up too quickly. To unlock the

retractor, push in the seat belt or pull

it out by approx. 20 mm then release.

To remove rear cover, unhook

retaining straps from tailgate.

Lift cover at the rear and push it

upwards at the front. Remove the

cover.

Stowing

When the load compartment is fully

loaded, stow the load compartment

cover on the rear seats or remove

from vehicle.

70

Storage

Rear floor storage cover

Rear floor cover

To remove the three other segments

(order 1 to 3) lift at the rear,

●

directly above the cover for the

spare wheel recess or the floor

cover

or in the upper openings in the

load compartment

disengage, twist and remove.

Lift up rear floor cover to gain access

to emergency breakdown equipment.

Tools 3 209.

Fitting

Install the segments in the order 3 to

1. Engage segments in recesses at

the side.

To remove, lift the load-bay floor

using the recess and pull backwards.

In models with a tyre repair kit on the

right side in the load compartment,

the spare wheel recess may be used

as an additional stowage

To insert, push the load-bay floor

forwards in the corresponding guide,

then lower.

If mounted in the upper position, the

space between the load-bay floor and

the spare wheel well cover can be

used as a stowage compartment.

The segments overlap at the

connecting points when they are

closed.

To install rear cover, engage cover in

side guides and fold downwards.

Attach retaining straps to tailgate.

compartment. Tyre repair kit 3 217.

Double load-bay floor

The double load-bay floor can be

inserted in the load compartment in

two positions:

Storage

71

In this position, if the rear seat

backrests are folded forwards, an

almost completely flat load bay is

created.

Delivery van

Lashing eyes

3-door/5-door hatchback

The double load-bay floor is able to

withstand a load of no more than

100 kg. In the lower position, the

double load-bay floor is able to

withstand the maximum permissible

load.

General hint

9 Warning

Loads can be secured using four

lashing eyes in the load compartment

For safety reasons, stow all parts

in the load compartment in its

position, always drive with a

closed rear floor cover and, if

possible, with folded up rear

backrests.

The lashing eyes are designed to

secure items against slippage, e.g.

using lashing straps or luggage net.

Otherwise, vehicle occupants

could be injured by objects being

thrown around in the event of hard

braking, a sudden change in

direction or an accident.

Storage -> Load compartment for Your Vauxhall Corsa 4 Door First Generation (2014-2019)

Related Topics

Storage

Popular Owner Manuals

Latest Owner Manuals