Keys, doors and windows
39
Press N firmly to the second detent
and then release at the front: the
sunblind is completely closed.
4. Press N gently to the first detent
at the rear until the sunblind is
completely opened.
5. Press N gently to the first detent
at the front until the sunblind is
completely closed.
After this procedure, the sunblind is
initialised with safety function
activated.
Safety function
If the sunblind encounters resistance
during automatic closing, it is
immediately stopped and opened
again.
When N is pressed firmly to the
second detent during initialising, the
procedure is cancelled.
Initialising after a power failure
After a power failure, it may only be
possible to operate the sunblind to a
limited extent. Initialise the system as
follows:
1. Switch on ignition.
2. Press N twice gently to the first
detent at the rear, the sunblind
opens slightly.
3. Immediately press N twice gently
to the first detent at the front, the
sunblind closes slightly.
After step 3 the sunblind is in
initialising mode without safety
function.
English 