Dashboard instruments and controls -> Engine Coolant Temperature Gauge for Your Vauxhall Frontera SUV Third Generation (2024-2026)

54  
Dashboard instruments and controls  
Power : Energy consumption during high  
power demand. Hybrid 48 V vehicles:  
ICE and electrical engine work combined.  
Eco : An optimum in energy is accessible  
in all drive modes. Hybrid 48 V vehicles:  
optimum usage of ICE or electric engine.  
Charge : Battery is being charged  
Odometer  
Engine Coolant Temperature  
Gauge  
with energy resulting from braking or  
deceleration of the vehicle.  
Vehicle Range  
Displays the total vehicle range.  
Digital Speedometer  
The total recorded distance of the vehicle  
is displayed in the right bottom corner of  
the cluster.  
Displays the coolant temperature.  
50  
engine operating  
temperature not yet  
reached  
Trip Odometer  
The following trip odometer pages  
are selectable in the trip/autonomy  
information menu or by pressing the right  
stalk button:  
90  
normal operating  
temperature  
Top of the  
gauge  
temperature too high  
Trip in progress with instantaneous fuel  
consumption  
Trip 1 or 2 with average consumption,  
average speed and trip distance  
Control indicator  
illuminates red if  
Indicates the vehicle speed.  
engine coolant temperature is too high.  
Hybrid 48 V vehicle: the distance  
percentage of electric driving is shown  
additionally.  
Caution  
If the engine coolant temperature is too  
high, stop the vehicle, switch off the  
Instrument cluster ðpage57  
Dashboard instruments and controls  
55  
If no service is required for the next 1800  
miles or more, no service information  
appears in the display.  
engine. Danger to the engine. Check  
the coolant level.  
If service is required within the next 1800  
miles, the remaining distance or time  
duration is indicated for several seconds.  
Engine Oil Level Monitor  
The state of the engine oil level is  
displayed in the cluster for a few seconds  
following the service information after  
switching on the ignition.  
Simultaneously indicator  
permanently as reminder.  
illuminates  
A proper state of engine oil level is  
indicated by a message.  
If the engine oil level is low, the two  
If service is required in less than  
620 miles, indicator flashes and then  
illuminates permanently. The remaining  
distance or time duration is indicated for  
several seconds.  
indicators  
is indicated.  
flash and a message  
Overdue service is indicated by a  
message in the cluster that indicates the  
overdue distance. The indicator flashes  
and then illuminates permanently until  
service is executed.  
Press the end of the right stalk to  
access menu.  
Confirm the engine oil level by using  
the dipstick and top up engine oil  
respectively.  
Scroll through the pages using the  
steering wheel toggle up and down.  
Engine oil ðpage141 .  
A fault of measurement is indicated by  
a message. Check the engine oil level  
manually by using the dipstick.  
Once the desired menu has been  
Reset of service interval  
reached, press and hold the button to  
reset.  
After each service, the service indicator  
must be reset to ensure proper  
functionality. It is recommended to seek  
the assistance of a workshop.  
Operate as following:  
When the display indicates "0",  
release the button. The indicator then  
disappears.  
Service Display  
The service system informs the driver  
when to change the engine oil and filter  
or a vehicle service is required. Based on  
driving conditions, the interval at which  
an engine oil and filter change is required  
can vary considerably.  
Retrieving service information  
To retrieve the status of the service  
information at any time:  
Switch off the ignition.  
Press the end of the right stalk to  
access the menu.  
Service information ðpage163  
A required service due is displayed in  
the cluster for several seconds after  
switching on the ignition.