Get Infotainment system -> Phone (Navi Pro) Guide for Vauxhall Grandland SUV Second Generation (2025-2026)

Infotainment system

135

To display the previous or next

turning manoeuvre on the map, touch

P or Q.

from this, the speech recognition

acknowledges important commands

and will enquire if necessary.

In general, there are different ways to

speak commands for performing the

desired actions.

To avoid the route section currently

displayed on the map, touch 6.

If desired, further route sections may

be selected to be avoided.

Note

To ensure that conversations inside

the vehicle do not lead to

unintentional triggering of the

system functions, the speech

recognition does not start until it has

been activated.

Confirm your selection(s).

Speech recognition

Embedded speech recognition

To display a turning manoeuvre on

the map, touch the turn arrow icon

next to the desired list entry. The map

jumps to the respective location on

the map.

The embedded speech recognition of

the Infotainment system enables you

to operate various functions of the

Infotainment system via voice input. It

recognises commands and numeric

sequences independently of the

relevant speaker. The commands

and numeric sequences can be

spoken without a voice pause

Important information

Language support

●

Not all languages available for

the display of the Infotainment

system are also available for the

speech recognition.

●

If the display language currently

selected is not supported by the

speech recognition, speech

recognition is not available.

between the individual words.

In the event of incorrect operation or

commands, the speech recognition

gives visual and / or acoustic

feedback and requests you to re-

enter the desired command. Apart

In such a case, you need to select

another language for the display

if you want to control the

Infotainment system via voice

136

Infotainment system

input. To change the display

Activating speech recognition

Interrupting a voice prompt

language 3 105.

As an experienced user, you can

interrupt a voice prompt by briefly

pressing Y on the steering wheel.

Note

Speech recognition is not available

during an active phone call.

Address input of destinations in

foreign countries

In case you want to enter the address

of a destination located in a foreign

country via voice input, you need to

change the language of the Info

Display to the language of the foreign

country.

Alternatively you can say "Set

dialogue mode as expert".

A beep is heard immediately, and a

command can be stated without

having to wait.

Activation via the Y button on the

steering wheel

Press Y on the steering wheel.

The audio system mutes, a voice

output message prompts you to say a

command, and help menus with the

most important commands currently

available are shown on the display.

The speech recognition is ready for

voice input, after a beep has been

given.

Cancelling a dialogue sequence

To cancel a dialogue sequence and

to deactivate the speech recognition,

press 6 on the steering wheel.

If you do not say any command for a

certain period of time, or if you say

commands that are not recognised by

the system, a dialogue sequence is

automatically cancelled.

E.g., if the display is currently set to

English and you want to enter the

name of a city located in France, you

need to change the display language

to French.

For changing the display language,

see "Language" in chapter "System

settings" 3 105.

You can now say a voice command to

initiate a system function (e.g. playing

a preset radio station).

Input order for destination addresses

The order in which the parts of an

address need to be entered using the

speech recognition system is

dependent on the country where the

destination is located.

If the speech recognition system

rejects your address entry, repeat the

command with a different order of the

address parts.

Adjusting the volume of voice

prompts

Press volume button on the steering

wheel upwards (increase volume)

Y or downwards (decrease volume)

Z.

Operation via speech commands

Follow the instructions given by voice

output and shown on the display.

Infotainment system

137

For best results:

Adjusting the volume of voice

prompts

Turn ) on the control panel or press

volume button on the steering wheel

upwards (increase volume) Y or

downwards (decrease volume) Z.

instructions for your mobile phone, or

you can enquire about them with your

network provider.

●

Listen for the voice prompt and

wait for the beep before saying a

command or replying.

Important information for

operation and traffic safety

●

Read the example commands on

the display.

The voice prompt can be

interrupted by pressing Y again.

Wait for the beep and then speak

the command naturally, not too

fast, not too slow.

Deactivating speech recognition

Press 6 on the steering wheel. The

speech recognition session is ended.

9 Warning

Mobile phones have effects on

your environment. For this reason

safety regulations and directions

have been prepared. You should

be familiar with the related

directions before you use the

telephone function.

Phone

Usually commands can be spoken in

a single command.

The phone function provides you with

the possibility of having mobile phone

conversations via a vehicle

Voice pass-thru application

microphone and the vehicle

The voice pass-thru application of the

Infotainment system allows access to

the speech recognition commands on

your smartphone.

loudspeakers as well as operating the

most important mobile phone

9 Warning

functions via the Infotainment system

in the vehicle. To be able to use the

phone function, the mobile phone

must be connected to the

Use of the hands-free facility while

driving can be dangerous because

your concentration is reduced

when telephoning. Park your

Voice pass-through is available via

the phone projection applications

Apple CarPlay and Android Auto.

Infotainment system via Bluetooth.

vehicle before you use the hands-

Not all phone functions are supported

by every mobile phone. The usable

phone functions depend on the

relevant mobile phone and network

provider. You can find further

Activating speech recognition

Press and hold Y on the steering

wheel until a speech recognition

session is started.

information on this in the operating

138

Infotainment system

However, two devices cannot be

used in hands-free mode at the

same time.

Pairing only needs to be carried

out once, unless the device is

deleted from the list of paired

devices. If the device has been

connected previously, the

Infotainment system establishes

the connection automatically.

Bluetooth operation considerably

drains the device's battery.

Therefore, connect the device to

the USB port for charging.

Press 6 and then touch

free facility. Follow the stipulations

of the country in which you find

yourself at present.

Bluetooth search.

A search for all Bluetooth devices

in the near environment is

performed.

●

Do not forget to follow the special

regulations that apply in specific

areas and always switch off the

mobile phone if the use of mobile

phones is prohibited, if

interference is caused by the

mobile phone or if dangerous

situations can occur.

3. Select the Bluetooth device you

wish to pair from the displayed list.

4. Confirm the pairing procedure:

●

If SSP (secure simple

pairing) is supported:

Confirm the messages on the

Infotainment system and the

Bluetooth device.

Pairing a device

During the pairing process, PIN code

exchange between the Bluetooth

device and the Infotainment system

and connection of the Bluetooth

devices to the Infotainment system

are carried out.

●

If SSP (secure simple

pairing) is not supported:

Pairing a new device

1. Activate the Bluetooth function of

the Bluetooth device. For further

information, see the operating

instructions for the Bluetooth

device.

On the Infotainment system:

a message is displayed

asking you to enter a PIN

code on your Bluetooth

device.

On the Bluetooth device:

enter the PIN code and

confirm your input.

Important information

2. If another Bluetooth device is

●

Two paired Bluetooth devices

can be connected to the

Infotainment system at the same

time. One device in hands-free

mode, the other in audio

streaming mode, see description

on Bluetooth profile settings

below.

already connected:

Press 6, select OPTIONS, select

Bluetooth connection and then

touch * Search.

If no Bluetooth device is currently

connected:

5. Activate the functions you want

the paired smartphone to perform

and confirm your settings. You

can change these Bluetooth

Infotainment system

139

profile settings at any time, see

below.

The Infotainment system and the

device are paired.

Activate or deactivate the profile

settings as desired and confirm your

settings.

Connecting a paired device

Devices which are paired but not

connected are identified by X.

Select the desired device to connect

it.

6. The phone book is downloaded

automatically to the Infotainment

system. Depending on the phone,

the Infotainment system must be

allowed access to the phone

book. If required, confirm the

messages displayed on the

Bluetooth device.

Disconnecting a device

The currently connected device is

identified by W.

Many functions of the mobile phone

can now be controlled via the phone

main menu (and associated

submenus), and via the phone-

specific controls on the steering

wheel.

If this function is not supported by

the Bluetooth device, a

corresponding message is

displayed.

Select the device to disconnect it.

Deleting a paired device

Touch f in the upper right corner of

the screen to display f icons next to

each paired device.

Touch f next to the Bluetooth device

you want to delete and confirm the

displayed message.

Operations on paired devices

Press 6, select OPTIONS and then

select Bluetooth connection.

A list of all paired devices is

displayed.

Initiating a phone call

Entering a phone number

Enter a phone number using the

keypad in the phone main menu.

Changing the Bluetooth profile

settings

Touch a next to the desired paired

device.

Phone main menu

Press 6 / a to display the phone

main menu.

Infotainment system -> Phone (Navi Pro) for Your Vauxhall Grandland SUV Second Generation (2025-2026)

Related Topics

Infotainment system

Popular Owner Manuals

Latest Owner Manuals