Service and maintenance for Your Vauxhall Grandland SUV Second Generation (2025-2026)

300  
Service and maintenance  
the service display. Contact a  
workshop for customised service  
schedules.  
General information  
Service and  
maintenance  
Service information  
Service display 3 75.  
In order to ensure economical and  
safe vehicle operation and to  
maintain the value of your vehicle, it  
is of vital importance that all  
General information ................... 300  
Service information .................. 300  
maintenance work is carried out at the  
Recommended fluids, lubricants  
and parts .................................... 304  
Recommended fluids and  
proper intervals as specified.  
The detailed, up-to-date service  
schedule for your vehicle is available  
at the workshop.  
lubricants ................................ 304  
Severe operating conditions exist if  
one or more of the following  
circumstances occur frequently: Cold  
starting, stop and go operation, e.g.  
for taxis and police vehicles, trailer  
operation, mountain driving, driving  
on poor and sandy road surfaces,  
increased air pollution, presence of  
airborne sand and high dust content,  
driving at high altitude and large  
variations of temperature.  
Under these severe operating  
conditions, certain service work may  
be required more frequently than the  
regular service interval indicated in  
 
Service and maintenance  
301  
Service intervals  
EB2ADT  
EB2ADTS  
EP6FADTXD  
(PHEV)  
EP6FDTMD  
EP6FDTM  
Engine code  
EB2FA  
EB2DTS  
EB2LTD  
Country group 20,000 km / 1 year 20,000 km / 1 30,000 km / 1 year  
year  
25,000 km / 1  
year  
1
Country group 15,000 km / 1 year 20,000 km / 1 20,000 km / 1 year  
year  
25,000 km / 1  
year  
2
Country group 15,000 km / 1 year 20,000 km / 1 20,000 km / 1 year 10,000 km / 1  
year  
15,000 km / 1  
year  
year1)  
3
Country group 15,000 km / 1 year 15,000 km / 1 20,000 km / 1 year  
20,000 km / 1  
year  
4
year  
Country group  
5, 6  
10,000 km / 1  
year  
10,000 km / 1  
year  
1)  
Unless otherwise indicated in the service display.  
 
302  
Service and maintenance  
DV5RC  
DV5RD  
DV5RCD  
Engine code  
DV5RCE  
DW10FC  
DV6D  
30,000 km / 1 year 1)  
30,000 km / 1 year 1)  
15,000 km / 1 year  
15,000 km / 1 year  
10,000 km / 1 year  
30,000 km / 1 year 1)  
30,000 km / 1 year 1)  
20,000 km / 1 year  
20,000 km / 1 year  
10,000 km / 1 year  
Country group 1  
Country group 2  
Country group 3  
Country group 4  
Country group 5, 6  
15,000 km / 1 year  
10,000 km / 1 year  
1)  
Unless otherwise indicated in the service display.  
Country Group 1:  
Andorra, Austria, Belgium, Cyprus, Denmark, Finland, France, Germany, Greece, Iceland, Italy, Liechtenstein,  
Luxembourg, Malta, Monaco, Netherlands, Norway, Portugal, Republic of Ireland, San Marino, Spain, Sweden,  
Switzerland, United Kingdom.  
Country Group 2:  
Bosnia-Herzegovina, Bulgaria, Croatia, Czech Republic, Estonia, Hungary, Latvia, Lithuania, North Macedonia, Poland,  
Romania, Slovakia, Slovenia.  
Country Group 3:  
Albania, Kosovo, Montenegro, New Zealand, Serbia.  
Country Group 4:  
Israel, Lesotho, South Africa, Swaziland, Turkey.  
 
Service and maintenance  
303  
Country Group 5:  
Russia.  
Country Group 6:  
All other countries which are not listed in the previous country groups.  
Confirmations  
Confirmation of service is recorded in the Service and warranty booklet. The date and mileage is completed with the stamp  
and signature of the servicing workshop.  
Make sure that the Service and warranty booklet is completed correctly as continuous proof of service is essential if any  
warranty or goodwill claims are to be met, and is also a benefit when selling the vehicle.  
 
304  
Service and maintenance  
Select the appropriate engine oil  
based on its quality and on the  
minimum ambient temperature  
3 308.  
Additional engine oil additives  
The use of additional engine oil  
additives could cause damage and  
invalidate the warranty.  
Recommended fluids,  
lubricants and parts  
Recommended fluids and  
lubricants  
Topping up engine oil  
Caution  
Engine oil viscosity grades  
The SAE viscosity grade gives  
information of the thickness of the  
engine oil.  
Multigrade engine oil is indicated by  
two figures, e.g. SAE 5W-30. The first  
figure, followed by a W, indicates the  
low temperature viscosity and the  
second figure the high temperature  
viscosity.  
Select the appropriate viscosity grade  
depending on the minimum ambient  
temperature 3 308.  
All of the recommended viscosity  
grades are suitable for high ambient  
temperatures.  
Only use products that meet the  
recommended specifications.  
In case of any spilled engine oil,  
wipe it up and dispose of it  
properly.  
9 Warning  
Operating materials are  
hazardous and could be  
poisonous. Handle with care. Pay  
attention to information given on  
the containers.  
Engine oils of different manufacturers  
and brands can be mixed as long as  
they comply with the required engine  
oil quality and viscosity.  
Use of engine oils for all petrol  
engines with only ACEA quality is  
prohibited, since it can cause engine  
damage under certain operating  
conditions.  
Select the appropriate engine oil  
based on its quality and on the  
minimum ambient temperature  
3 308.  
Engine oil  
Engine oil is identified by its quality  
and its viscosity. Quality is more  
important than viscosity when  
selecting which engine oil to use. The  
engine oil quality ensures e.g. engine  
cleanliness, wear protection and  
engine oil aging control, whereas  
viscosity grade gives information on  
the engine oil's thickness over a  
temperature range.  
Coolant and antifreeze  
Use only antifreeze approved for the  
vehicle. Consult a workshop.  
The system is factory filled with  
coolant designed for excellent  
corrosion protection and frost  
protection down to approx. -28 °C. In  
 
Service and maintenance  
305  
cold regions with very low  
AdBlue  
Only use AdBlue to reduce the  
nitrogen oxides in the exhaust  
emission 3 180.  
temperatures the factory filled coolant  
provides frost protection down to  
approx. -37 °C. This concentration  
should be maintained all year round.  
The use of additional coolant  
additives that intend to give additional  
corrosion protection or seal against  
minor leaks can cause function  
problems. Liability for consequences  
resulting from the use of additional  
coolant additives will be rejected.  
Washer fluid  
Use only washer fluid approved for  
the vehicle to prevent damage of  
wiper blades, paintwork, plastic and  
rubber parts. Consult a workshop.  
Brake and clutch fluid  
Over time, brake fluid absorbs  
moisture which will reduce braking  
effectiveness. The brake fluid should  
therefore be replaced at the specified  
interval.