Storage -> Load compartment for Your Vauxhall Grandland SUV Second Generation (2025-2026)

52  
Storage  
Additional cupholders are located in  
the rear armrest. Fold down armrest.  
Load compartment  
The rear seat backrest is divided into  
2/3 to 1/3 parts. Both parts can be  
folded down individually to increase  
the size of the load compartment.  
Centre console storage  
Before folding rear seat backrests,  
execute the following if necessary:  
Move front seats forward if  
necessary.  
Remove the load compartment  
cover.  
Press and hold the catch to push  
the head restraints down.  
Pull the release lever on one or  
both outer sides and fold down  
the backrests onto the seat  
cushion.  
Load compartment cover 3 54.  
Head restraints 3 29  
The storage container can be used to  
store small items.  
Depending on the version, the  
storage compartment is located  
under a cover.  
Folding down/up rear backrests  
Check that the seat belts are not  
engaged in the seat belt buckles,  
so that the backrests can be  
moved.  
 
Storage  
53  
Alternatively fold seat backrests  
from the load compartment: pull  
switch on left or right sidewall of  
the load compartment to fold the  
corresponding part of the rear  
seat backrest.  
Opening the pass through in the  
centre backrest  
9 Warning  
Take care when operating the rear  
backrests from the load  
compartment. The backrest is  
folded with considerable power.  
Risk of injury, particularly to  
children.  
Ensure that nothing is attached to  
the rear seats or located on the  
seat cushion.  
9 Warning  
When folding up, ensure that  
backrests are securely locked in  
position before driving. Failure to  
do so may result in personal injury  
or damage to the load or vehicle in  
the event of hard braking or a  
collision.  
Fold down the rear armrest.  
To fold up, raise the backrests  
and guide them into an upright  
position until they engage  
audibly. Make sure that the belts  
are positioned correctly and stay  
clear of the folding area.  
Pull grip and open the cover.  
 
54  
Storage  
Suitable for loading long, narrow  
objects.  
Rear floor storage cover  
Load compartment cover  
Do not place any objects on the cover.  
Removing cover  
Lift cover at the rear and push it  
upwards at the front.  
Remove the cover.  
The rear floor cover can be lifted and  
removed. Raise cover at the loop and  
remove.  
Fitting cover  
Engage the cover in the side guides  
and fold downwards. Attach the  
retaining straps to the tailgate.  
Unhook the retaining straps from the  
tailgate.  
 
Storage  
55  
To hold the load compartment cover  
in an upright positon, lift it up past the  
retractable stops.  
Passengers must not be transported  
behind the safety net.  
Installation  
Lashing eyes  
Behind the rear seats  
Attach the hooks of safety net  
straps in the lashing eyes behind  
the rear seats.  
Tension both straps by pulling at  
the loose end.  
Rear seat backrests must be  
raised up.  
There are installation openings  
on both sides in the roof frame  
above the rear seats: suspend  
and engage rod of net at one  
side, compress rod and suspend  
and engage at the other side.  
The lashing eyes are designed to  
secure items against slippage, e.g.  
using lashing straps or luggage net.  
Safety net  
The safety net can be installed behind  
the rear seats or, if the rear seat  
backrests are folded, behind the front  
seats.  
 
56  
Storage  
Behind the front seats  
Attach hooks of safety net straps  
to the lashing eyes at the lower  
area of the rear seats.  
Tension both straps by pulling at  
the loose end.  
Push down head restraints and  
fold down rear seat backrests  
3 52.  
Attach the hooks of safety net  
straps to the lashing eyes on the  
backside of the rear sets.  
Tension both straps by pulling at  
the loose end.  
There are installation openings  
on both sides in the roof frame  
above the front seats: suspend  
and engage rod of net at one  
side, compress rod and suspend  
and engage at the other side.  
Depending on version, the hooks of  
the safety net straps are attached to  
the lashing eyes on the backside of  
the rear seats.  
Push down head restraints and  
fold down rear seat backrests.  
 
Storage  
57  
Removal  
Warning triangle  
First aid kit  
Pull the flap at the tightener on both  
sides to release the straps. Detach  
hooks from the lashing eyes.  
Unhook the safety net rods from the  
installation openings in the roof  
frame.  
Stow the first aid kit in the storage  
Stow the warning triangle in the space  
on the inside of the tailgate and  
secure it with the Velcro® fastener.  
Depending on version, the warning  
triangle may be stowed below the rear  
floor cover of the load compartment.  
compartment on the right side of the  
load compartment.  
Depending on version, the first aid kit  
may be stowed below the rear floor  
cover of the load compartment.  
Roll up the net and secure with a  
strap.