2011-2017 Vauxhall Meriva SUV Instruments and controls -> Information displays User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and controls -> Information displays for Your Vauxhall Meriva SUV Second Generation (2011-2017)

100  
Instruments and controls  
●
●
trip/fuel information  
vehicle messages, displayed as  
code numbers 3 105  
Information displays  
Driver Information Centre  
The Driver Information Centre is  
located in the instrument cluster  
between speedometer and  
tachometer. It is available as  
Midlevel-Display, Uplevel-Display or  
Uplevel-Combi-Display.  
In the Uplevel-Combi-Display, menu  
pages can be selected by pressing  
MENU on the turn signal lever; Menu  
symbols are indicated in the top line  
of the display:  
In the Uplevel-Display the following  
main menus can be selected by  
pressing MENU on the turn signal  
lever:  
●
●
X Vehicle Information Menu  
W Trip/Fuel Information Menu  
Some of the displayed functions differ  
when the vehicle is being driven or at  
a standstill. Some functions are only  
available when the vehicle is being  
driven.  
Vehicle personalisation 3 111,  
Memorised settings 3 21.  
●
●
Vehicle Information Menu  
Trip/Fuel Information Menu  
Midlevel-Display indicates:  
●
●
●
●
overall odometer  
trip odometer  
some control indicators  
vehicle information  
Instruments and controls  
Vehicle Information Menu  
101  
Selecting menus and functions  
The menus and functions can be  
selected via the buttons on the turn  
signal lever.  
Press MENU to select the Vehicle  
Information Menu, or on Uplevel-  
Combi-Display select X.  
Turn the adjuster wheel to select a  
submenu. Press SET/CLR to confirm.  
Follow the instructions given in the  
submenus.  
Possible submenus can be,  
depending on the version:  
●
Unit: Displayed units can be  
changed.  
On vehicles with Midlevel-  
Display following settings can be  
selected:  
Turn the adjuster wheel to highlight a  
menu option or to set a numeric value.  
●
●
●
Unit1: Great Britain  
Unit2: United States  
Unit3: Europe  
Press MENU to switch between the  
menus or to return from a submenu to  
the next higher menu level.  
●
●
Tyre Pressure System: Checks  
tyre pressure of all wheels during  
driving 3 197.  
Tyre Load: Select tyre pressure  
category according to the  
actually inflated tyre pressure  
3 197.  
Press SET/CLR to select a function or  
to confirm a message.  
102  
Instruments and controls  
●
●
Speed Warning: If exceeding the  
preset speed, a warning chime  
will be activated.  
Language: Displayed language  
can be changed if the vehicle is  
not equipped with a radio.  
●
●
●
trip odometer 1  
trip odometer 2  
digital speed  
Trip odometer 2 and digital speed are  
only available on vehicles with  
Uplevel-Display or Uplevel-Combi-  
Display.  
Reset trip odometer by pressing  
SET/CLR on the turn signal lever for  
a few seconds or by pressing the  
reset knob between speedometer  
and Driver Information Centre with  
the ignition on.  
On vehicles with trip computer more  
submenus are available.  
Selection and indication can be  
different between Midlevel-, Uplevel-,  
and Uplevel-Combi-Display.  
Selection and indication can be  
different between Midlevel-, Uplevel-,  
and Uplevel-Combi-Display.  
Trip/Fuel Information Menu  
Press MENU to select the Trip/Fuel  
Information Menu, or select W on  
Uplevel-Combi-Display.  
Turn the adjuster wheel to select a  
submenu. Press SET/CLR to confirm.  
●
Remaining Oil Life: Indicates  
when to change the engine oil  
and filter 3 90.  
Trip/Fuel Information Menu, Trip  
Computer 3 108.  
Instruments and controls  
Colour-Info-Display  
103  
Graphic-Info-Display,  
Colour-Info-Display  
Depending on the vehicle  
configuration the vehicle has a  
●
Graphic-Info-Display  
or  
●
Colour-Info-Display  
The Info-Display is located in the  
instrument panel above the  
Infotainment system.  
Graphic-Info-Display indicates:  
Graphic-Info-Display  
●
●
●
●
time 3 85  
outside temperature 3 84  
date 3 85  
electronic climate control settings  
3 131  
The Colour-Info-Display indicates in  
colour:  
●
●
●
●
time 3 85  
outside temperature 3 84  
date 3 85  
electronic climate control settings  
3 131  
●
Infotainment system, see  
description for Infotainment  
system in the Infotainment  
manual  
settings for vehicle  
personalisation 3 111  
●
●
rear view camera 3 157  
Infotainment system, see  
description for Infotainment  
system in the Infotainment  
manual  
●
Depending on the Infotainment  
system, the Graphic-Info-Display is  
available in two versions.  
104  
Instruments and controls  
●
navigation, see description for  
Infotainment system in the  
Infotainment manual  
system settings  
vehicle messages 3 105  
Selections are made via:  
Multifunction knob  
The multifunction knob is the central  
●
●
menus  
control element for the menus:  
Turn  
function buttons and  
multifunction knob of the  
Infotainment system  
●
●
●
●
●
to mark a menu option  
to set a numeric value or to  
display a menu option  
settings for vehicle  
personalisation 3 111  
Selecting with the Infotainment  
system  
The type of information and how it is  
displayed depends on the equipment  
of the vehicle and the settings made.  
Press (the outer ring)  
●
to select or activate the marked  
option  
●
●
to confirm a set value  
to switch a system function on/off  
Selecting menus and settings  
Menus and settings are accessed via  
the display.  
BACK  
Press BACK to:  
●
●
●
exit a menu without changing  
settings  
return from a submenu to a  
higher menu level  
delete the last character in a  
character sequence  
Select a function via the Infotainment  
system buttons. The menu of the  
selected function is displayed.  
The multifunction knob is used to  
select an item and to confirm.  
Press and hold BACK for a few  
seconds to delete the entire entry.  
Vehicle personalisation 3 111,  
Memorised settings 3 21.  
Instruments and controls  
105  
Vehicle messages on the  
Midlevel-Display  
No. Vehicle message  
Vehicle messages  
Messages are indicated mainly in the  
Driver Information Centre, in some  
cases together with a warning and  
signal buzzer.  
6
7
9
Depress brake pedal to release  
electrical parking brake  
Turn steering wheel, switch  
ignition off and then on  
Turn steering wheel, start  
engine again  
12 Vehicle overloaded  
13 Compressor overheated  
15 Centre high-mounted brake  
light failure  
The vehicle messages are displayed  
as code numbers.  
16 Brake light failure  
17 Headlight levelling malfunction  
18 Left low beam failure  
19 Rear fog light failure  
20 Right low beam failure  
21 Left sidelight failure  
No. Vehicle message  
Press SET/CLR, MENU or turn the  
adjuster wheel to confirm a message.  
2
No radio remote control  
detected, depress clutch pedal  
for a restart  
3
4
5
Engine coolant level low  
Air conditioning off  
22 Right sidelight failure  
23 Reversing light failure  
24 Number plate light failure  
Steering wheel is locked  
106  
Instruments and controls  
No. Vehicle message  
No. Vehicle message  
No. Vehicle message  
71 Service rear axle  
74 Service AFL  
25 Left front turn signal failure  
26 Left rear turn signal failure  
27 Right front turn signal failure  
28 Right rear turn signal failure  
29 Check trailer brake light  
30 Check trailer reversing light  
31 Check left trailer turn signal  
32 Check right trailer turn signal  
33 Check trailer rear fog light  
34 Check trailer rear light  
56 Tyre pressure imbalance on  
front axle  
57 Tyre pressure imbalance on  
rear axle  
75 Service air conditioning  
76 Service side blind zone alert  
system  
58 Tyres without TPMS sensors  
detected  
79 Top up engine oil  
59 Open and then close driver  
window  
81 Service transmission  
82 Change engine oil soon  
83 Service adaptive cruise control  
84 Engine power is reduced  
89 Service vehicle soon  
94 Shift to park before exiting  
95 Service airbag  
60 Open and then close front  
passenger window  
61 Open and then close rear left  
window  
62 Open and then close rear right  
window  
35 Replace battery in radio remote  
control  
65 Theft attempted  
48 Clean side blind zone alert  
system  
66 Service theft alarm system  
67 Service steering wheel lock  
68 Service power steering  
69 Service suspension system  
70 Service level control system  
128 Bonnet open  
53 Tighten gas cap  
134 Park assist fault, clean bumper  
136 Service parking assist  
54 Water in diesel fuel filter  
55 Diesel particle filter is full  
3 144  
Instruments and controls  
Warning chimes  
107  
●
●
●
●
●
●
●
●
●
●
●
●
●
●
brakes  
drive systems  
No. Vehicle message  
174 Low vehicle battery  
258 Park assist off  
Only one warning chime will sound at  
a time.  
ride control systems  
cruise control  
object detection systems  
lighting, bulb replacement  
wiper/washer system  
doors, windows  
radio remote control  
seat belts  
airbag systems  
The warning chime regarding  
unfastened seat belts has priority  
over any other warning chime.  
Vehicle messages on the  
Uplevel-Display or  
Uplevel-Combi-Display  
When starting the engine or whilst  
driving  
●
●
If seat belt is not fastened.  
If a door or the tailgate is not fully  
closed when starting-off.  
●
●
●
If a certain speed is exceeded  
with parking brake applied.  
If a programmed speed is  
exceeded.  
If a warning message or a  
warning code appears in the  
Driver Information Centre.  
engine and transmission  
tyre pressure  
diesel particle filter  
Vehicle messages on the  
Colour-Info-Display  
Some important messages appear  
additionally in the  
Colour-Info-Display. Press the  
multifunction knob to confirm a  
message. Some messages only pop-  
up for a few seconds.  
●
●
If the parking assist detects an  
The vehicle messages are displayed  
as text. Follow the instructions given  
in the messages.  
The system displays messages  
regarding the following topics:  
object.  
If reverse gear is engaged and  
the rear end carrier is extended.  
●
●
fluid levels  
anti-theft alarm system  
108  
Instruments and controls  
●
If a fault in the automatic locking  
system is detected.  
If the diesel particle filter has  
reached the maximum filling  
level.  
The warning message or warning  
code will disappear after the engine  
has been started twice consecutively  
without a voltage drop.  
If the vehicle battery cannot be  
recharged, have the cause of the fault  
remedied by a workshop.  
Trip computer  
The menus and functions can be  
selected via the buttons on the turn  
signal lever 3 100.  
●
When the vehicle is parked and/or  
the driver's door is opened  
●
With exterior lights on.  
During an Autostop  
●
If the driver's door is opened.  
Battery voltage  
When the vehicle battery voltage is  
running low, a warning message or  
warning code 174 will appear in the  
Driver Information Centre.  
1. Switch off immediately any  
electrical consumers which are  
not required for a safe ride, e.g.  
seat heating, heated rear window  
or other main consumers.  
Press MENU to select the Trip/Fuel  
Information Menu, or select W on  
the Uplevel-Combi-Display.  
2. Charge the vehicle battery by  
driving continuously for a while or  
by using a charging device.  
Instruments and controls  
109  
●
●
●
●
●
●
●
trip odometer 1  
trip odometer 2  
range  
average consumption  
instantaneous consumption  
average speed  
digital speed  
Page 1:  
●
●
●
trip odometer 1  
average consumption 1  
average speed 1  
Trip/Fuel Information Menu on  
Uplevel-Combi-Display  
Turn the adjuster wheel to select a  
page:  
Trip/Fuel Information Menu on  
Uplevel-Display  
Turn the adjuster wheel to select one  
of the submenus:  
Page 2:  
●
●
●
trip odometer 2  
average consumption 2  
average speed 2  
110  
Instruments and controls  
Page 3:  
Reset trip odometer by pressing  
SET/CLR on the turn signal lever for  
a few seconds or, on vehicles with  
reset knob, by pressing the reset  
knob near the speedometer  
Trip odometer  
Trip odometer displays the recorded  
distance since a certain reset.  
Trip odometer counts up to a distance  
of 2,000 miles and then restarts at 0.  
●
●
●
digital speed  
range  
instantaneous consumption  
separately for selected page 1 or 2.  
Trip computer 1 and 2  
Fuel range  
Range is calculated from current fuel  
tank level and current consumption.  
The display shows average values.  
After refuelling, the range is updated  
automatically after a brief delay.  
The information of two trip computers  
can be reset separately for odometer,  
average consumption and average  
speed by pressing SET/CLR, making  
it possible to display different trip  
information for different drivers.  
When the fuel level in the tank is low,  
a message appears in the display.  

Related Topics

Instruments and controls
Controls Warning lights, gauges and indicators Vehicle personalisation OnStar

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot