28
Keys, doors and windows
Status LED
Alarm
Immobiliser
The system is part of the ignition
switch and checks whether the
vehicle is allowed to be started with
the key being used.
When triggered, the alarm horn
sounds and the hazard warning lights
flash simultaneously. The number
and duration of alarm signals are
stipulated by legislation.
The alarm can be silenced by
pressing any button of the radio
remote control or by switching on the
ignition.
The immobiliser is activated
automatically after the key has been
removed from the ignition switch.
If control indicator d flashes when the
ignition is on, there is a fault in the
system; the engine cannot be started.
Switch off the ignition and then repeat
the start attempt.
The anti-theft alarm system can be
deactivated only by pressing c or by
switching on the ignition.
Status LED is integrated in the central
locking button.
Status during the first 10 seconds of
anti-theft alarm system activation:
A triggered alarm, which has not been
interrupted by the driver, will be
indicated by a warning message or a
warning code in the Driver
If control indicator d continues
flashing, attempt to start the engine
using the spare key and seek the
assistance of a workshop.
Information Centre after switching on
LED illuminates : test, arming delay
Notice
the ignition.
Vehicle messages 3 105.
LED flashes
quickly
: doors, tailgate or
bonnet not
completely closed,
or system fault
The immobiliser does not lock the
doors. You should always lock the
vehicle after leaving it and switch on
the anti-theft alarm system 3 22,
3 27.
If the vehicle's battery is to be
disconnected (e.g. for maintenance
work), the alarm siren must be
deactivated as follows: switch the
ignition on then off, then disconnect
the vehicle's battery within
Status after system is armed:
Control indicator d 3 98.
LED flashes
slowly
: system is armed
15 seconds.
Seek the assistance of a workshop in
the event of faults.