Keys, doors and windows
31
Notice
Status after system is armed:
The anti-theft alarm system can be
deactivated by pressing e or
switching on the ignition.
Changes to the vehicle interior, e.g.
the use of seat covers, and open
windows, could impair the function
of passenger compartment
monitoring.
LED flashes
slowly
: system is armed
Seek the assistance of a workshop in
the event of faults.
Immobiliser
The system is part of the ignition
switch and checks whether the
vehicle is allowed to be started with
the key being used.
Status LED
Deactivation
Radio remote control: Unlocking the
vehicle by pressing c deactivates the
anti-theft alarm system.
Electronic key system: Unlocking the
vehicle by pressing the button on any
exterior door handle deactivates the
anti-theft alarm system.
The electronic key must be outside
the vehicle, within a range of approx.
1 m of the relevant door side.
The immobiliser is activated
automatically after the key has been
removed from the ignition switch.
If the control indicator d flashes when
the ignition is on, there is a fault in the
system. The engine cannot be
started. Switch off the ignition and
repeat the start attempt.
If the control indicator continues
flashing, attempt to start the engine
using the spare key and seek the
assistance of a workshop.
The system is not deactivated by
unlocking the driver's door with the
key or with the central locking button
in the passenger compartment.
Status LED is integrated in the sensor
on top of the instrument panel.
Status during the first 30 seconds of
anti-theft alarm system activation:
Alarm
LED illuminates : test, arming delay
The alarm can be silenced by
pressing any button on the radio
remote control or by switching on the
ignition.
LED flashes
quickly
: doors, tailgate or
bonnet not
completely closed,
or system fault
English 
