Climate control -> Temperature preconditioning for Your Vauxhall Vivaro Van Third Generation (2019-2026)

Climate control  
151  
Air conditioning and automatic  
mode are automatically switched  
on. The LED in the button A/C  
illuminates, AUTO is shown in the  
display.  
Temperature and air distribution  
are set automatically and the fan  
runs at high speed.  
Switch on heated rear window  
è.  
Switch on heated windscreen  
9.  
Deactivation of electronic climate  
control system  
Press s subsequently until the  
electronic climate control system is  
deactivated.  
temperature preconditioning can be  
switched on and off using a remote  
control.  
This function is also available via the  
MyVauxhall App.  
The operating status of the  
temperature preconditioning is shown  
Temperature  
preconditioning  
by an indicator with an LED.  
LED illuminates: A timer has  
been set.  
LED flashes: The system is  
operating.  
The temperature preconditioning  
allows to heat the vehicle's interior  
and to ventilate the vehicle's interior  
with ambient air.  
To return to previous mode,  
press h again.  
The LED is extinguished at the end of  
the heating /ventilation operation or  
when the temperature  
preconditioning is stopped using the  
remote control.  
Notice  
If h is pressed while the engine is  
running, an Autostop will be inhibited  
until h is pressed again.  
Operating conditions  
If h is pressed while the engine is  
in an Autostop, the engine will restart  
automatically.  
The temperature preconditioning can  
be activated both when the vehicle is  
charged and when is not charged.  
When the vehicle is not charged, the  
function is only activated if the  
charging level of the high voltage  
battery is above 50 percent.  
Heated rear window è 3 43.  
Heated exterior mirrors m 3 39.  
Heated windscreen 9 3 44.  
Stop-start system 3 161.  
The temperature preconditioning can  
be programmed using the  
Infotainment system. Additionally, the  
152  
Climate control  
The temperature preconditioning is  
only activated when the ignition is off  
and the vehicle is locked.  
Press Heating or Ventilation.  
Press H or I to select the desired  
timer. Confirm with OK.  
Set the required time of the timer:  
Press 7 or 8 to set the desired  
value. Confirm with OK.  
To set the timer, press H or I to  
select OK on the display. Confirm with  
OK.  
Operation via remote control  
The temperature preconditioning can  
be switched on using a remote  
control.  
Programming via Infotainment  
system  
The temperature preconditioning can  
be programmed using the  
Infotainment system. Two timers can  
be defined. A timer defines the time at  
which the vehicle's interior is to be  
heated / ventilated to a factory-set  
temperature.  
Multimedia / Multimedia Navi  
Press d.  
Press Temperature conditioning.  
Activate Temperature conditioning by  
pressing ON.  
Press Settings.  
Select Heating or Ventilation.  
Press Time 1 or Time 2 to select the  
desired timer.  
Define the time of the selected timer.  
Press 6 to save the settings and set  
the timer.  
Restrictions:  
Only one timer can be activated.  
If two timers are defined and the  
activated timer is cancelled, the  
inactive timer is not activated  
automatically. The timer has to  
be activated manually.  
Press i.  
Replacing the battery in the remote  
control  
If only one timer is defined and  
activated and the vehicle is not  
started, the timer will be  
cancelled for the following day.  
The timer has to be activated  
again.  
If the indicator light of the remote  
control turns yellow, the charging  
status of the battery is weak. If the  
indicator light does not illuminated  
anymore, the battery is discharged  
and has to be replaced.  
Radio (Infotainment system)  
Press MENU to open the menu page.  
Climate control  
153  
Outer air vents in the instrument  
panel  
Air vents  
Adjustable air vents  
Air vents in the instrument panel  
1. Remove the cap of the remote  
control by unscrewing it with a  
coin and remove the battery  
2. Replace battery with a battery of  
the same type. Pay attention to  
the installation position.  
Direct the flow of air by tilting and  
swivelling the slats.  
To close the vent, swivel the slats  
outwards.  
At least two air vents must be open  
while cooling is on.  
Direct the flow of air by tilting and  
swivelling the slats.  
To close the vent, swivel the slats  
inwards.  
3. Screw the cap in its place .  
9 Warning  
Do not attach any objects to the  
slats of the air vents. Risk of  
damage and injury in case of an  
accident.