04 Interior
Cargo area
4. Attach the rear lower hooks on the cover to
the lower eyelets (D) on opposite sides of
the vehicle.
Soft cargo area cover*
WARNING
The cargo area cover does not have a load
anchoring function. No item should be place
on top of the cargo area cover. These items
could move forward and cause injury during
braking.
Hanging the cover when it is not in use
1. Remove the rear hooks (D) from the eye-
lets.
2. Press together the rear rails (C) and remove
them from their attachments. Place them
at the front of the cargo area floor.
Removing the cover
1. Retract the front lock pins at (A) by pulling
back the lock buttons on both sides as far
as possible.
04
3. Attach the hooks in the rail next to the
attachments (B).
2. Retract the rear lock pins at (B) by pulling
back the lock buttons on both sides as far
as possible.
The cargo area cover is now hanging near the
rear seat backrests until it is needed again.
3. Lift up and turn the cover before lifting it out
of the vehicle.
Removing the cargo area cover
1. Remove the hooks and remove the rails
one at a time by pressing them together
and removing them from their attach-
ments.
The cargo area cover is pulled over the cargo
area and fastened to the eyelets with the hooks
on the corners of the cover.
Installing the cover
1. Attach the front lower hooks on the cover
to the lower eyelets (A) on opposite sides
of the vehicle.
2. When all attachments have been removed,
the cover can be rolled up and placed on
the rear part of the cargo area floor to make
room for cargo.
2. Insert the front upper attachments (B) by
pressing together the spring-loaded rails
and pressing them into place on opposite
sides of the vehicle.
3. Insert the upper rear rails (C) in the same
way.
121
* Option/accessory, for more information, see Introduction.
English 
