Read the separate section of this manual about conditions and limitations of your car's cameras to understand how features re-
lying on camera detection are affected.
The appearance, condition and layout of road markings can affect their detection in the following ways:
Lane divisions and mergers can cause temporary misidentification of the lane.
Non-standard or unusual road marking layouts might not be identified correctly by the car. For example, road work or traffic
diversions can result in conflicting or multiple sets of road markings.
The car may be unable to detect deteriorated road markings, for example if they are worn, misshapen or discoloured.
Other edges or lines can be misidentified as road markings, such as kerbs, road surface repair edges, barriers or well-
defined shadows.
Road markings must be sufficiently illuminated to be detected. In low-light conditions, they need to be illuminated by the
car or street lights.
10.3.3.1. Disabling lane keeping aid
You can enable or temporarily disable lane keeping aid in settings.
When lane keeping aid is enabled, the car can alert you or intervene by steering if you are about to drift out of your lane.
You can temporarily disable lane keeping aid if it interferes too much with your driving. This can be useful if the road markings
are partially obscured or faded, which can cause unwanted warnings.
Important
Changing driver support settings
Make sure that you understand how changing the car’s settings affects its behaviour. It is particularly important when it
comes to features that affect the level of assistance the car can provide.
Press the car symbol
in the bottom bar and go to Settings.
1
Go to Driving → Safety assistance → Lane keeping aid.
2
3
Enable or disable lane keeping aid.
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future
instances. For more information, refer to the first page for the complete disclaimer note.
242 / 396
English 
