When you ease up on the accelerator, the car will apply regenerative braking.
Low
When you ease up on the accelerator, the car will brake with more force than in the low setting.
High
Tip
Quick access
The adjustment settings for One pedal drive are available in quick controls and via the customisable steering wheel but-
ton
as well. These allow you to quickly adjust the level of braking force from One pedal drive without going into
settings.
Warning
Keep the brake pedal in mind
There is a limit to the braking force that can be applied by releasing the accelerator when using One pedal drive. For hard
braking, you need to use the brake pedal.
Press the car symbol
in the bottom bar and go to Settings.
1
Go to Driving → Driving dynamics → One pedal drive.
2
3
Select a setting.
8.4.2. Enabling automatic creeping
When creeping is enabled, the car can automatically move slowly without you using the accelerator.
Automatic creeping can be enabled or disabled in settings.
When you start your car with creeping enabled, you first need to press the accelerator to start the automatic creeping. When the
movement has started, you no longer have to use the accelerator to creep. However, if you have just come to a slight stop, you
can initiate creeping just by releasing the brake pedal. This can be useful in driving situations such as traffic queues or car parks.
Tip
Pressing down hard on the brake pedal temporarily pauses creeping and activates auto hold. Press the accelerator to
initiate creeping again.
Press the car symbol
in the bottom bar and go to Settings.
1
Go to Driving → Driving dynamics → Creep forwards.
2
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future
instances. For more information, refer to the first page for the complete disclaimer note.
183 / 396
English 
