2025-2026 Volvo EX40 SUV Charging your car User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Charging your car for Your Volvo EX40 SUV First Generation (2025-2026)

7. Charging your car  
Learn how charging works and how you can make each charging session more efficient.  
In this section, you can find out more about the different charging types, charging settings, and how to start and stop charging.  
You can also read about other types of charging-specific information.  
7.1. Charging types  
Learn more about the different types of charging for your car and how to initiate charging for each type.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
176 / 444  
Warning  
Charging components and high voltage  
The car's charging components carry hazardous currents and voltages. They must be handled with care. Do not  
perform actions that are not clearly described in the user manual.  
Do not modify or make your own repairs to any charging components. Contact an authorised Volvo workshop for  
any required repairs or servicing.  
Installation and repairs of at-home charging equipment[1] must be performed by a licensed electrician.  
Damage to the car's high-voltage components, including the traction battery, can cause overheating, fire and serious  
personal injury. If there is a risk of damage, such as after battery leakage, flooding, fire or a collision, do not use the  
car. Contact an authorised Volvo workshop as soon as possible. If possible, leave the car outdoors and away from  
people, buildings, property and other objects that could catch or spread fire.  
If you have a pacemaker or similar device  
Charging the car may affect the function of an implanted pacemaker or other medical equipment. People with an im-  
planted pacemaker are recommended to consult a doctor before charging the first time.  
Note  
12 V battery charging  
The car keeps the 12 V battery charged as long as the high-voltage battery has sufficient charge.  
Condensation during charging  
During charging, condensation from the cooling system can collect under the car. This is perfectly normal and caused by  
the traction battery cooling down.  
AC charging at a charging station or from a charging point at home  
AC charging points are available at a variety of charging locations, both public and private. An AC charging point can be in-  
stalled at home and is the recommended source for regular charging.  
AC charging with a household socket  
You can charge your car from a regular household socket. This type of charging is only suitable for occasional charging and is  
not recommended for regular use. If you are planning to charge your car from a household socket, there are additional steps  
you need to take to ensure it is done safely.  
Warning  
Do not use visibly worn or damaged electrical sockets as they could cause overheating, electric shock or personal injury.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
177 / 444  
Important  
The car must only be charged from approved, earthed household sockets.  
Do not exceed the maximum permitted charging current when charging via a regular household socket. Limits  
imposed by local and national charging recommendations may apply.  
Ensure that the household socket fuse can handle the charging cable's specified current before you start charging. If  
you are uncertain, the socket must be checked by a qualified and licensed electrician.  
Never connect the charging cable when there is a risk of thunderstorm or lightning strike.  
DC fast charging  
DC fast charging is available at certain charging stations. These charging stations deliver very high power, as well as shorter  
charging times.  
Note  
Charging stations with support for fast charging are usually clearly marked CCS or Combo.  
Charging cables  
There are different charging cables to use when you charge your car. Mode 3 cables are the standard cable to use when char-  
ging electric cars. There are different versions of the mode 2 cable available. Mode 2 cables can be used as an emergency solu-  
tion, but it is not recommended to use them as a daily charging method.  
Automatic charging while driving  
Your car can automatically charge its batteries[2] slightly while driving. This is done through regenerative braking during lighter  
braking using the foot brake and by engine braking in gear B. Charging your car this way is not an alternative to using a char-  
ging station or a charging point, but it is a way of re-using some of the car's kinetic energy during braking manoeuvres.  
[1]  
Including any work on the electric metre housing or power distribution service panel.  
[2]  
both the traction battery and the 12 V battery.  
7.1.1. Charging cables  
When using a charging cable for the first time, always check to make sure it's compatible with your car.  
Charging cable recommendations and use  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
178 / 444  
Warning  
High voltage  
The cable is connected to a hazardous electrical system. Contact with high voltage current can cause fatality or serious  
personal injury.  
Damaged cables  
Do not use a charging cable that shows any signs of damage or wear. It can cause an electric shock. A damaged or mal-  
functioning charging cable provided by Volvo may only be repaired at an authorised workshop. Contact an authorised  
Volvo workshop for more information. If you are charging at a charging station, try another cable or charging point.  
Excessive wear and debris  
Remember to always check the charging cable’s connector for excessive wear or debris. Do not touch the charging  
cable's connector or use any tools to attempt to remove debris from the charging cable. It can cause an electric shock.  
Public charging stations are in constant use and can be exposed to more wear and tear than a private charging station.  
Cable placement  
Remember to place the cable where there is minimal risk of it getting damaged or causing personal injury. A carelessly  
placed cable can easily get run over or tripped over.  
Child safety  
Keep children away from charging cables, especially when the cables are plugged in.  
Important  
Adaptors  
Do not use any adaptors between the charging cable and the electrical socket of the car.  
Do not use any adaptors between the charging cable and the household socket.  
Liquids and cables  
Do not wash the car when the charging cable is connected or when the charging lid is open.  
Do not submerge the charging cable or its components in liquid. If you need to clean the cable, use a clean cloth lightly  
dampened with water. If needed, use a mild detergent but never use chemicals or strong solvents.  
Only use recommended cables  
Only use the cables originally provided with your car or that are recommended by Volvo.  
Volvo takes no responsibility for damage or injury caused by charging equipment not recommended by Volvo.  
The charging cable has been designed to meet Volvo's safety standard.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
179 / 444  
Note  
Recommended cables  
Volvo recommends a charging cable according to IEC 62196 and IEC 61851 that supports temperature monitoring.  
Charging cable instructions  
Before using a charging cable, make sure to read the instructions from the cable's manufacturer.  
Some charging stations have a permanently attached charging cable. Be sure to follow the charging station's instruc-  
tions on how to use it.  
Mode 3 cable for charging stations  
You can use this type of cable to charge your car at AC[1] charging stations.  
Mode 2 charging cables  
Use a charging cable with a household plug to charge the car from an ordinary household socket, such as when no other char-  
ging options are available.  
Important  
Do not use this type of charging as a daily charging method.  
[1]  
Alternating current  
7.2. Charging view and settings  
In the charging view, you can access information about the charging process, start or stop the charging,  
unlock the charging cable and set different charging settings. You can customise the charging settings  
according to your preferences. The charging view appears automatically when charging is initiated.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
180 / 444  
Note  
The information content can vary depending on the current charging status.  
The following information, functions and settings are available in the centre display:  
Current battery level  
Target battery level  
Amperage[1]  
Charging status  
Set a target battery level  
Limit the electrical current for AC charging  
Add and manage schedules  
Unlock the charging cable  
Activate Plug & Charge  
Tip  
You can also access information about battery level, charging status and the charging process in the Volvo Cars app.  
You can also access the charging view through the settings in the centre display.  
[1]  
Amperage is only shown if a limit was set.  
7.2.1. Setting a target battery level for charging  
You can set a target battery level by selecting a value in the charging view. This can help you to maintain  
good charging performance and battery longevity.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
181 / 444  
Tip  
You can also set a target battery level for charging via the Volvo Cars app.  
1. Press the car symbol  
in the bottom bar and go to Settings.  
2. Go to Charging Target battery level.  
3. Select your preferred battery level.  
>
The target battery level value changes. The value is saved until you change it again.  
7.2.2. Setting the amperage limit for charging  
You can set an amperage limit for AC charging by selecting a value in the charging view.  
Ampere, often written as "amp" or "A", is the unit for electric current.  
1. Press the car symbol  
in the bottom bar and go to Settings.  
2. Go to Charging Limit charging current.  
3. Turn the function on.[1]  
4. Adjust the amperage limit to your preferred value.  
>
The amperage limit changes and the value is saved until you change it again. When your car is charging, the amperage limit  
is shown in the centre display.  
Note  
The amperage may be limited by the charging station, charging cable or the car. There is no guarantee that the car can  
be charged with the specified amperage if it is higher than what is permitted by the charging station or charging  
cable.  
[1]  
Only available for AC charging.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
182 / 444  
7.2.3. Adding and managing charging schedules  
You can set and activate a charging schedule for your car in the charging view. This means you can specify  
when you want the car to charge, such as when plugged in overnight.  
Tip  
You can also add a charging schedule via the Volvo Cars app.  
A charging schedule can be set for a specific location. When you arrive at that specific location, the charging schedule is auto-  
matically applied.  
1.  
Press the car symbol  
in the bottom bar and go to Settings.  
2. Go to Charging Schedules.  
3. Press Add to add a charging schedule.  
4. Select start and stop times for the charging schedule by using the timer and then press Save.  
5. Activate the schedule by turning it on.  
>
The timer is active and the scheduled charging time is visible in the charging view.  
You can also modify the schedule by adjusting start and stop times.  
Deactivate the schedule by turning it off. The timer is not active and no scheduled charging is planned.  
Note  
Override a charging schedule  
If you want to interrupt an ongoing scheduled charging session, you can simply unplug the charging cable from the car.  
Connect the cable again immediately[1] to start a normal charging session. The scheduled charging is stopped and you  
need to manually set start and stop times for your next scheduled charging session.  
You can also override a charging schedule and charge straight away via the Volvo Cars app. This option is available if a  
charging schedule is active, your car is in park and the charging cable is connected.  
[1]  
Within 3 seconds.  
7.3. Start and stop charging  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
183 / 444  
]
You can charge your car by using either AC[ ] charging or DC[ charging. How you start and stop the char-  
ging process depends on the type of charging you use.  
1
2
AC charging is the recommended charging mode as it maintains the condition of the battery over time. This is the type of char-  
ging you are using when you are charging from a charging station, from a charging point at home or from a regular household  
socket. However, using a household socket is not recommended for regular use and is only suitable for occasional charging.  
DC charging is available at certain charging stations and charges your car faster than AC charging. DC charging can be used  
when you need to recharge your battery immediately.  
Tip  
Scheduling charging in the Volvo Cars app  
You can schedule charging by setting start and stop times via the Volvo Cars app.  
[1]  
Alternating current  
[2]  
Direct current  
7.3.1. Starting AC charging  
AC charging can be done at certain charging stations, from a charging point at home or from a regular  
household socket. The cable you need depends on the charging mode.  
To initiate charging, make sure:  
the car is in park.  
the charging settings are set up according to your preferences.  
If you are using a regular household socket, also make sure it meets the safety requirements for charging.  
Warning  
Do not connect any equipment other than the charging cable between the charging source and the car's charging port.[1]  
It can cause malfunction, damage or electric shock.  
1. Connect the charging cable to the charging source. Some charging stations have a permanently attached charging cable  
that you connect to your car.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
184 / 444  
2. Open the charging lid by lightly pressing on its rearmost end.  
3. Remove any protective cover from the cable connector.  
Important  
To avoid damage to the car, position the connector's protective cover so that it does not touch the car.  
4. Connect the cable to the charging port.  
>
When the cable is fully inserted it locks into place. Charging starts within a few seconds.  
You can see the charging status in the charging port and in the driver display.  
Recommended action if charging does not start  
First, disconnect the cable from the car's charging port, then from the charging source. Wait a moment before reconnecting it.  
If the problem persists, contact an authorised Volvo workshop.  
[1]  
This includes extension leads, socket splitters, socket adaptors, external timers, overvoltage protection devices and similar  
devices.  
7.3.2. Starting DC charging  
DC charging is available at certain charging stations.  
DC charging stations have permanently attached charging cables, so you don't need to use your own.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
185 / 444  
Warning  
Public charging stations are in constant use and can be exposed to more wear and tear than a private charging  
station. Remember to always check the charging cable’s connector for excessive wear or debris.  
Do not touch the charging cables connector or use any tools to attempt to remove debris from the charging cable. It  
can cause an electric shock.  
Do not use a charging cable that shows any signs of damage or wear. It can cause an electric shock. Try another cable  
or charging point at the charging station.  
Ensure that the charging cables connector connects all the way into the charging port. A worn connector may  
prevent a safe connection to your car.  
To initiate charging, make sure:  
the car is in park.  
to check the charging station for any instructions before you begin.  
1. Open the charging lid by lightly pressing on its rearmost end.  
2. Remove any covers from the port and cable connector.  
3. Use both hands to press the cable's connector all the way into the charging port. Make a habit of pushing the charging cable  
upwards for a couple of seconds after inserting it to ensure connection and locking.  
>
The charging cable automatically locks in place after a few seconds.  
4. After confirming that the cable is locked in place, follow the charging station's instructions for charging authorisation.  
Charging starts after an insulation test has been completed by the charging station. It can take a minute to complete.  
>
You can see the charging status in the charging port and in the driver display.  
7.3.3. Stopping AC charging  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
186 / 444  
You can stop the charging process at any time.  
Important  
Stop the charging session before attempting to unplug the cable from the car's charging port. If you do not, you may  
cause damage to the cable or to the system.  
1. Stop charging by pressing the release button next to the charging socket.  
>
The charging is stopped and the charging cable unlocks from the charging port.  
2. Unplug the charging cable from the car.  
Note  
If the charging cable isn’t unplugged within a short period of time, the cable locks again and charging resumes.  
3. If available, reattach the protective cover on the cable connector.  
4. Depending on the cable you have used:  
Unplug the charging cable from the charging station.  
Reattach the charging cable to the station's storage socket.  
5. Close the charging lid.  
Tip  
You can also stop the charging process from the charging station or by pressing the Unlock cable button in the car's  
centre display.  
7.3.4. Stopping DC charging  
You can stop the charging process at any time.  
Important  
Stop the charging session before attempting to unplug the cable from the car's charging port. If you do not, you may  
cause damage to the cable or to the system.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
187 / 444  
1. Stop charging by pressing the release button next to the charging socket.  
>
The charging is stopped and the charging cable's handle unlocks. This may take a couple of seconds.  
2. Unplug the charging cable from the car.  
Note  
If the charging cable isn’t unplugged within a short period of time, the cable locks again and charging resumes.  
3. If available, reattach the protective cover on the cable connector.  
4. Reattach the charging port's protective cover and close the charging lid.  
7.3.5. Releasing the charging cable  
If the charging cable doesn't automatically release after you have stopped the charging, there are some steps  
you can try.  
The charging cable usually releases automatically when you have stopped the charging. However, if the charging cable is left in  
the charging port for a while after charging has stopped, the charging cable is automatically locked in again.  
Make sure that the key is within range and that the car is unlocked.  
Stop charging by pressing the release button next to the charging port or by pressing Unlock cable in the centre display.  
If you're charging at a public charging station, follow the instructions in the charging stations interface to stop charging.  
Carefully wiggle the charging cable.  
Lock and unlock the car.  
Lock the car and wait until the LED on the car's charging port turns off. This can take some time. After that, unlock the car  
and try to stop charging via the release button or via the centre display again.  
If the charging cable still doesn’t release, stop charging via the charging station, charging point or household socket in one of  
the following ways:  
Charging via a public charging station: Contact the charging stations customer service to get help to stop the charging.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
188 / 444  
Charging via a home charging point: Safely disconnect the power supply to your home charging point.  
Charging via a household socket: Unplug the cable from the household socket.  
If the problem persists, contact an authorised Volvo workshop.  
7.3.5.1. Manually releasing the charging cable  
If the charging cable doesn't release from the car after you have stopped the charging, you can use the  
emergency release handle. Never use the emergency release handle when charging is in progress.  
1. Open the boot and the cargo hatch.  
2. Locate the emergency release handle on the left side of the boot.  
3.  
Warning  
Before using the emergency release handle, check the driver display or the charging port to make sure the charging  
process has stopped. The emergency release handle should not be used when charging is in progress.  
Carefully pull the emergency release handle until you feel resistance.  
>
The charging cable unlocks from the charging port.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
189 / 444  
Note  
The emergency release handle automatically retracts when the next charging cycle is started.  
4. Wait for about 5 seconds before unplugging the charging cable from the car.  
5. Close the boot.  
If the problem persists, contact an authorised Volvo workshop.  
7.4. Charging time and statuses  
Learn more about charging times so that you have an idea of what to expect in different situations and what  
the different charging statuses mean.  
7.4.1. Charging times  
The time it takes to charge your car depends on the charging type and several factors. The charging times  
mentioned are approximate.  
Some examples of factors that can affect the charging time are:  
preconditioning  
ambient temperature  
battery temperature  
charging equipment  
battery size  
battery condition and car condition  
infrastructure.  
Charging from a household socket[ ]  
1
Important  
Volvo strongly advises against AC charging of 100–120 V in combination with an amperage under 10 A.  
Current (A)[2] Charging power (kW)[3] Charging time (hours)[4]  
6[5]  
10  
1.3  
72  
40  
24  
2.2  
3.6  
16  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
190 / 444  
Current (A)[2] Charging power (kW)[3] Charging time (hours)[4]  
7.2 12  
32  
Charging at a charging station or from a charging point at home  
Current (A)[2] Charging power (kW)[3] Charging time (hours)[4]  
4
22  
14  
8
6
6.8  
11  
10  
16  
DC charging at a charging station  
Station power (kW)[6] Charging time (minutes)[7]  
61  
50  
27  
27  
26  
150  
175  
200[8]  
Tip  
When you use Google Maps to set a fast-charging station as your destination, the car preconditions the battery to im-  
prove charging performance once you get there.  
[1]  
Using a 200-240 V socket.  
[2]  
[3]  
[4]  
[5]  
[6]  
[7]  
[8]  
Maximum charging current may vary depending on region.  
The maximum charging power that the car can achieve is 11 kW.  
From 0-100%  
Only valid for some markets.  
Maximum power that the charging station can supply.  
Applies at 10-80% state of charge provided that the temperature of the battery is approximately 35 °C (95°F).  
Charging output may vary depending on battery variant and market.  
7.4.2. Charging status  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
191 / 444  
The car's charging status is shown using different colours, both in the charging port and in the driver display.  
1
2
1
Charging status information in the driver display  
Charging status information in the charging port  
2
The charging port light only indicates the current status of the charging cycle. If you would like more comprehensive informa-  
tion, you can find this in the driver display.  
7.4.2.1. Charging status in the charging port  
You can see the car's current charging status in the charging port.  
Colour  
Colour  
Description  
name  
White  
Welcome light.  
Yellow  
The charging cable is attached and the charging process is waiting to start.  
The charging process is being stopped.  
Charging is in progress.  
Yellow,  
pulsating  
Green,  
pulsating  
Blue  
Charging is scheduled.  
Green  
Red  
Charging is complete.  
Charging fault. Check the displays for additional information. Always make sure that the charging cable is correctly connected to the car's charging  
port and that the power source, such as the cable or the charging station, works correctly. If an error is indicated, try to disconnect the cable from  
the car then reconnect it and re-initiate charging to see if the problem is solved. If the problem persists, contact an authorised Volvo workshop.  
Red,  
The car is locked and doesn't detect any key when the charging cable is unlocked via the release button.  
pulsating  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
192 / 444  
Note  
The charging port light in the charging lid indicates the status for the traction battery and not whether the car is  
consuming power, for example when the climate control is in use. Even if the charging port light indicates that charging  
is complete or that scheduled charging is active, the car may still draw power from the port.  
7.4.2.2. Charging status in the driver display  
You can see the car's current charging status in the driver display.  
1
2
3
Information available in the driver display.  
Charging status information  
Battery level information  
Current range  
1
2
3
The driver display contains charging status information such as status text, battery level, current range, remaining charging time  
and scheduled time information. Different colours of the progress bar are also visible. The information may vary depending on  
the charging status.  
Status  
Colour  
Colour name  
Description  
Yellow  
The cable is plugged in and the car is initialising the connection.  
Initialising  
Green,  
The car is charging.  
Charging  
Done  
pulsating  
Green  
Blue  
Charging is complete.  
The car starts charging according to the set schedule. Information about the scheduled time is visible in the display.  
Scheduled  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
193 / 444  
Status  
Colour  
Colour name  
Description  
Yellow  
The charging cable is attached and the charging process is either waiting to start or paused.  
Waiting  
Red  
The cable is plugged in but there is an error in the charging connection. If the problem persists, contact an authorised Volvo  
workshop.  
Charging  
fault  
Note  
If the driver display is not used for a while, it turns off. You can activate the display again by opening one of the doors.  
7.5. Plug & Charge  
Plug & Charge is an authentication and billing system that simplifies your charging experience.  
Plug & Charge is enabled by ISO 15118, the international standard for charging electric cars. When using Plug & Charge, you  
don't need to use additional cards, apps or manual authentication steps. Instead, you can just connect the charging cable to  
your car which automatically recognises and authenticates your car, allowing the charging process to start.  
The number of charging stations that support Plug & Charge is limited and all types of charging might not be supported. If the  
charging station doesn't support Plug & Charge, you need to authorise yourself at the charger.  
There are other ways that can help you simplify your charging process. By using certain car parameters, you can connect the in-  
formation to different apps and charging providers. Your car can then be automatically identified at the charging station,  
without any need for additional cards. However, the car's displays won't show any information or instructions for these  
methods.  
7.5.1. Activating Plug & Charge  
You can activate Plug & Charge in the charging view. This can simplify the charging process, from  
authentication to billing.  
Note  
Plug & Charge is included in the charging view but may not be available in your country. This is because e-mobility  
service providers[1], charging stations and other infrastructure need to support Plug & Charge in your country before the  
feature can be used.  
1.  
Press the car symbol  
in the bottom bar and go to Settings.  
2. Go to Charging Advanced settings Plug & Charge.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
194 / 444  
3. Turn the function on.  
4. Press View more to easily copy your car's unique PAID[2] number. Follow the instructions on how to activate Plug &  
Charge in the Volvo Cars app.  
If you use a provider that isn't Volvo's partner, the process and instructions may vary depending on the e-mobility service  
provider.  
5. Connect your car at a public charging station.  
>
The contract certificate is installed through the cable and the authorisation and payment are handled by the car and the char-  
ging station. You can see the status in the driver display and the charge port during the installation.  
The charging session starts when the authorisation is finished.  
You can find your contract certificate under Charging account. If you turn Plug & Charge off after installing a contract, it be-  
comes disabled and inactive.  
Note  
If there are some faults related to Plug & Charge, try to reconnect the charging cable. If it still doesn't work, check the  
charging settings to see if there is a contract installed in your car. If there is a contract, contact your e-mobility service  
provider to make sure that there are no issues with the contract. If there is no contract, follow the activation steps  
again. If the problem persists, try normal charging. Authorise yourself at the charger and follow the instructions in the  
charging station's interface.  
If Plug & Charge isn't working after a workshop visit, it could be because the contract certificate was removed from  
your car. Follow the activation steps again.  
Handling Plug & Charge contract certificates  
Note  
Removing contract certificates  
After the Plug & Charge contract certificates are created, they're stored in the car and in an external server outside the car.  
Remember to delete both certificates when ending or transferring car ownership.  
Your contract certificate in the car can be deleted from the centre display. Press the car symbol  
go to Settings Charging Advanced settings Plug & Charge Charging account, then press the rubbish bin  
symbol  
in the bottom bar and  
.
To delete your contract certificate in the external server, go to the Plug & Charge settings in the mobile app for your car.[3]  
Factory resetting of your car doesn't automatically delete the installed contract certificates. You still have to delete the  
contract certificate via the centre display.  
Adding a new contract certificate  
To add a new contract certificate, make sure Plug & Charge is on and follow the activation steps again. The most recent  
contract certificate will always be installed. If you want to delete the account permanently, you also need to cancel the  
contract with your e-mobility service provider.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
195 / 444  
[1]  
An e-mobility service provider, also known as an e-MSP, is a company or organisation that offers services related to  
electric mobility.  
[2]  
[3]  
Provisioning certificate ID  
If you use a provider that isn't Volvo's partner, contact them as the process and instructions may vary.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
196 / 444  

Related Topics

Popular Owner Manuals