Location of the preset seat adjustment buttons
1. Adjust the seat to your preferred position.
2. Press the M button.
>
The button's indicator light turns on.
3. Press and hold down one of the memory buttons within three seconds of pressing the M button.
>
When the position has been saved, you will hear a sound signal and the indicator light turns off.
Note
If none of the memory buttons are pressed within three seconds, the M button turns off and no position is saved. The
seats must be readjusted before a new position can be set.
Your preferred positions are saved in the active user profile.
Use a saved seat position
A saved position can be used with the front door open or closed. However, the process for activating the saved seat
position differs.
If your front door is open, you can activate a saved position by pressing one of the memory buttons. The seat moves
and stops in the saved position.
If your front door is closed, press and hold one of the memory buttons until the seat stops in the saved position.
If you want to change a saved seat position, adjust the seat to your preferred position and repeat the process again. A new seat
position is saved on the selected memory button.
4.4.2. Rear seats
You can adjust the rear seats in a number of ways to get more space or use the additional features to better
suit your needs.
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future
instances. For more information, refer to the first page for the complete disclaimer note.
101 / 444