WHEELS AND TYRES
Warning triangle
The warning triangle is used to warn other road
users of a stationary vehicle.
IMPORTANT
The tools and jack* must be stored in the
intended location in the car's cargo area
when not in use.
Storage and folding up
NOTE
After a tyre has been inflated, always refit
the dust cap in order to avoid damage to
the valve from gravel, dirt, etc.
•
•
Lift the floor hatch (or push the rear part of
the luggage compartment floor forwards in
models with a jointed floor and then lift the
lower floor) and remove the warning triangle.
Only use plastic dust caps. Metal dust
caps can rust and become difficult to
unscrew.
Take the warning triangle from the case, fold
out and assemble the two loose sides.
When changing to another tyre
dimension
Fold out the warning triangle's support legs.
Contact an authorised Volvo workshop to update
the software each time the tyre dimension is
changed. A software download may be necessary
both when changing to larger and smaller dimen-
sions, and also when switching between summer
and winter wheels.
Follow the regulations for the use of a warning
triangle. Position the warning triangle in a suita-
ble place with regard to traffic.
Ensure the warning triangle and its case are
properly secured in the cargo area after use.
Related information
•
Related information
Changing wheels - taking out the spare
Spare wheel* (p. 326)
•
wheel* (p. 327)
Changing wheels - removing wheels (p. 328)
Spare wheel* (p. 326)
•
•
•
•
Warning triangle (p. 331)
Wheel nuts (p. 325)
* Option/accessory. 331
English 
