06 Infotainment system
Voice recognition* mobile phone
06
``
* Option/accessory, for more information, see Introduction.
273
To skip a lesson and go to the next one, press
the button for voice recognition and say
"Next". Go back to the previous lesson by say-
ing "Previous".
Exit the instructions by means of a long press
on the button for voice recognition.
Voice training
The system displays up to fifteen phrases for
you to say. Voice training can be started in the
menu system MY CAR under
Settings
Voice settings Voice training. Choose
between
User 1 or User 2. For a description
of the menu system, see page 202.
After voice training has been completed,
remember to set your user profile under
Voice
user setting
.
Additional settings in MY CAR
•
User setting - Two user profiles can be
set, the function is activated in the menu
system MY CAR under
Settings Voice
settings
Voice user setting. Choose
between
User 1 or User 2. For a descrip-
tion of the menu system, see page 202.
•
Voice volume - Can be changed in the
menu system MY CAR under
Settings
Voice settings Voice output volume.
For a description of the menu system, see
page 202.
Using voice commands
The driver initiates a dialogue with the voice
commands by pressing the button for voice
recognition (see illustration on page 272).
Once a dialogue has been started, commonly
used commands will be shown in the TV
screen. Greyed-out text or text within brackets
is not included in the spoken command.
When the driver becomes accustomed to the
system, he/she can speed up the command
dialogue and skip the prompts from the sys-
tem, by briefly pressing the button for voice
recognition.
Commands can be given in several ways
The command "Phone call contact" can be
pronounced as e.g.:
•
"Phone > Call contact" - Say "Phone", wait
for the system's reply, and then continue
by saying "Call contact."
or
•
"Phone call contact" - Say the whole com-
mand in one sequence.
Quick commands
Quick commands for the phone can be found
in the menu system MY CAR under
Settings
Voice settings Voice command list
Phone commands and General commands.
For a description of the menu system, see
page 202.
Dial a number
The system understands the numbers 0 (zero)
to 9 (nine). These numbers can be pronounced
individually, in groups of several numbers at a
time, or the whole number all at once. Numbers
greater than 9 (nine) cannot be handled by the
system, e.g. 10 (ten) or 11 (eleven) are not pos-
sible.
The following is an example of a dialogue with
voice commands. The system's reply will vary
depending on the situation.
The user starts the dialogue by saying:
Phone > call number
or
Phone call number
System reply
Number?
User action
Start saying the numbers (as individual units,
i.e. six-eight-seven, etc.) in the phone number.
If you say several numbers and pause, the sys-
tem will repeat them, and then say "Continue".
Continue to say the numbers. When finished,
finish the command by saying "Call".
•
You can also change the number by saying
the commands "Correct" (which deletes
English 
