Get Your driving environment -> Seats Guide for Volvo V60 SUV First Generation (2010-2017)

03 Your driving environment

Seats

* Option/accessory, for more information, see Introduction.

Front seats

Lumbar support adjustment, turn the

wheel

Forward/backward: lift the handle to adjust

the distance to the steering wheel and ped-

als. Check that the seat is locked after

changing position.

Raise/lower* front edge of seat cushion,

pump up/down.

Adjust backrest rake, turn the wheel.

Raise/lower the seat, pump up/down.

Control panel for power seat*.

WARNING

Adjust the position of the driver's seat

before setting off, never while driving. Make

sure that the seat is in locked position in

order to avoid personal injury in the event of

sudden braking or an accident.

Lowering the front seat backrest

The passenger seat backrest can be folded

forward to make room for long loads.

Move the seat as far back/down as possi-

ble.

Adjust the backrest to an upright position.

Lift the catches on the rear of the backrest

and fold it forward.

4. Push the seat forward so that the head

restraint "locks" in under the glovebox.

Raising takes place in reverse order.

WARNING

Grasp the backrest and make sure that it is

properly locked after being folded up in

order to avoid personal injury in the event of

sudden braking or an accident.

Also applies to power seat.

03 Your driving environment

Seats

* Option/accessory, for more information, see Introduction.

Power seat*

Front edge of seat cushion up/down

Seat forward/backward and up/down

Backrest rake

The power front seats have overload protection

which is tripped if a seat is blocked by an

object. If this happens, go to key position I or

0 and wait a short time before adjusting the

seat again.

Only one movement (forward/back/up/down)

can be made at a time.

Preparations

The seats can be adjusted for a certain time

after unlocking the door with the remote con-

trol key without the key in the ignition switch.

Seat adjustment is normally made in key posi-

tion I and can always be made when the engine

is running.

Seat with memory function*

Store setting

Memory button

Button for storing settings

1. Adjust the seat and the door mirrors.

2. Hold the button depressed to store set-

tings while depressing one of the memory

buttons.

Using a stored setting

Hold one of the memory buttons depressed

until the seat and the door mirrors stop. If you

release the button then the movement of the

seat will stop.

Key memory* in remote control key

All remote control keys can be used by differ-

ent drivers to store the settings for the driver's

seat and door mirrors

. Proceed as follows:

•

Adjust the seat as you want it.

•

Lock the car by pressing the lock button on

the remote control key that you normally

For key memory for Keyless function, see page 55.

Only if the car is equipped with power seat with memory and retractable power door mirrors.

03 Your driving environment

Seats

use. This stores the positions of the seat

and door mirrors in the remote control

key's memory

•

Unlock the car (by pressing the unlock but-

ton on the same remote control key) and

open the driver's door. The driver's seat

and door mirrors will automatically adopt

the positions that are stored in the remote

control key's memory (if the seat has been

moved since you locked the car).

The key memory can be activated/deactivated

in the menu system MY CAR under

Settings

Car settings Car key memory. For a

description of the menu system, see

page 202.

Emergency stop

If the seat accidentally begins to move, press

one of the setting buttons for the seat or mem-

ory buttons in order to stop the seat.

Restarting to reach the seat position stored in

the key memory is performed by pressing the

unlock button on the remote control key. The

driver's door must then be open.

WARNING

Risk of crushing! Make sure that children do

not play with the controls. Check that there

are no objects in front of, behind or under

the seat during adjustment. Ensure that

none of the backseat passengers will be

trapped.

Heated seats

For heated seats, see page 215.

Rear seats

Head restraint, centre seat, rear

Adjust the head restraint according to passen-

ger height so that the whole of the back of the

head is covered if possible. Slide it up as

required.

To lower the head restraint again, the button

(located in the centre between the backrest

and head restraint, see illustration) must be

pressed in while the head restraint is pressed

down carefully.

Manual lowering of the outer head

restraints, rear seat

Pull the locking handle closest to the head

restraint to fold the head restraint forward.

The head restraint is moved back manually

until a "click" can be heard.

This setting does not affect settings that have been stored in the power seat's memory function.

03 Your driving environment

Seats

WARNING

The head restraints must be in locked posi-

tion after being raised.

Lowering the rear seat backrest

IMPORTANT

There must be no objects on the rear seat

when the backrest is to be folded down. The

seat belts must not be connected either.

Otherwise there is a risk of damaging the

rear seat upholstery.

The triple-section backrest can be folded in

different ways.

NOTE

The front seats may need to be pushed for-

wards, and/or the backrests adjusted

upwards, in order that the rear backrests

can be folded forward fully.

•

The left-hand section can be folded sepa-

rately.

•

The centre section can be folded sepa-

rately.

•

The right-hand section can only be folded

together with the centre section.

•

If the entire backrest is to be folded then

the different sections should be folded

separately.

If the centre backrest is being lowered -

fold and adjust the centre backrest's head

restraint downwards, see page 82.

The outer head restraints are lowered auto-

matically when the outer backrests are

lowered. Pull up the backrest's locking

handle

while folding the backrest for-

ward at the same time. A red indicator on

the lock catch

shows that the backrest

is no longer locked in place.

NOTE

When the backrests have been lowered the

head restraints must be moved forward

slightly so as not to make contact with the

seat cushion.

Raising takes place in reverse order.

NOTE

When the backrest has been raised, the red

indicator should no longer be showing. If it

is still showing then the backrest is not

locked in place.

WARNING

Check that the backrests and head

restraints in the rear seats are firmly locked

after raising.

03 Your driving environment

Seats

* Option/accessory, for more information, see Introduction.

Electrical lowering of the rear seat's

outer head restraints*

1. The remote control key must be in position

I or II.

2. Press the button to lower the rear outer

head restraints to improve rearward visi-

bility.

WARNING

Do not lower the outer head restraints if

there are any passengers using of the outer

seats.

Move the head restraint back manually until a

click is heard.

WARNING

The head restraints must be in locked posi-

tion after being raised.

Your driving environment -> Seats for Your Volvo V60 SUV First Generation (2010-2017)

Related Topics

Popular Owner Manuals

Latest Owner Manuals