LIGHTING
Tunnel detection
Low beams
When driving with the lighting ring in the
Using high beam
The vehicle will detect if it enters a tunnel and
shift from daytime running lights to low
beams.
High beam is operated via the left-hand
steering wheel lever. High beam is the vehi-
cle's strongest lighting and should be used
when driving in dark conditions, provided it
does not blind other road users, to improve
visibility.
position, low beam will be automati-
cally activated in weak daylight or dark condi-
tions, when the ignition is in the II position.
Note that the left-hand steering wheel lever
must be in
to work.
position for tunnel detection
Related information
Lighting control and panel (p. 148)
•
•
•
Ignition modes (p. 385)
Daytime running lights (p. 151)
Lighting ring in AUTO position.
With the lighting ring in the
low beams will be automatically activated if:
position, the
Steering wheel lever with lighting ring.
High beam flash
the front fog lights* are activated
the rear fog light is activated
•
•
•
Move the steering wheel lever slightly
backward to the high beam flash mode.
The high beams will illuminate until the
lever is released.
the rear and front fog lights are activated.
With the lighting ring in the
position,
low beams will always be on when the ignition
is in the II position.
High beams
The high beams can be activated when
the lighting ring is in mode
2 or
2
When the low beams are on.
152
* Option/accessory.
English 
