2018-2026 Volvo V60 SUV LOADING, STORAGE AND PASSENGER COMPARTMENT -> Installing and removing the steel cargo grid* User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

LOADING, STORAGE AND PASSENGER COMPARTMENT -> Installing and removing the steel cargo grid* for Your Volvo V60 SUV Second Generation (2018-2026)

LOADING, STORAGE AND PASSENGER COMPARTMENT  
3.  
Installing and removing the steel  
Installation  
CAUTION  
cargo grid*  
The steel cargo grid prevents loads or pets in  
the cargo compartment from being thrown  
forward into the passenger compartment  
during hard braking.  
The steel cargo grid may only be used in  
the rear position (behind the rear seat)  
described here.  
Before installing the steel grid, the existing  
plastic ceiling mounting consoles must be  
replaced with steel consoles. Volvo recom-  
mends that the ceiling consoles are only  
replaced by an authorized Volvo workshop or  
retailer.  
Position the grid's attachment points in  
the ceiling consoles.  
The next step will be easier if two people  
hold the steel grid in the right position.  
1. Fold down the rear seat backrests.  
2. Make sure that the steel grid is facing the  
right direction. Lift the grid into the vehicle  
through one of the rear doors.  
For safety reasons, the steel grid must always  
be installed and secured correctly.  
WARNING  
Under no circumstances may a person be  
in the cargo compartment when the vehi-  
cle is moving. Heavy braking or a collision  
could lead to serious injury.  
}}  
* Option/accessory. 551  
LOADING, STORAGE AND PASSENGER COMPARTMENT  
|| 4.  
Related information  
Installing and removing the cargo  
net*  
Loading recommendations (p. 545)  
The cargo net helps prevent objects in the  
cargo compartment from entering the pas-  
senger compartment in the event of a sudden  
stop or hard braking.  
Load anchoring eyelets (p. 548)  
The cargo net is attached at four points.  
Screw the provided screw into place using  
the provided 6 mm Allen wrench. Repeat  
on the other side. Recommended torque:  
20 Nm (15 ft-lb).  
> Check to make sure the steel grid is  
securely in place.  
5. Return the backrest to the upright posi-  
tion.  
For more information on necessary tools and  
procedures for installing/removing, see the  
assembly instructions provided with the steel  
grid.  
For safety reasons, the cargo net must always  
be mounted and secured according to the fol-  
lowing description.  
The net is made of strong nylon weave and  
can be attached in two different locations in  
the vehicle:  
CAUTION  
The steel cargo grid cannot be folded up or  
down when a cargo compartment cover is  
mounted.  
Rear mounting - behind the rear seats.  
Front mounting - behind the front seats.  
552  
* Option/accessory.  

Related Topics

Popular Owner Manuals