LIGHTING
||
Tunnel detection
Using high beam
. Activate high beams by moving the
steering wheel lever forward.
The vehicle will detect if it enters a tunnel and
shift from daytime running lights to low
beams.
High beam is operated via the left-hand
steering wheel lever. High beam is the vehi-
cle's strongest lighting and should be used
when driving in dark conditions, provided it
does not blind other road users, to improve
visibility.
Deactivate by moving the steering wheel
lever backward.
Note that the left-hand steering wheel lever
When the high beams are activated, the
symbol will be illuminated in the instrument
panel.
must be in
to work.
position for tunnel detection
Related information
Related information
Lighting control and panel (p. 152)
•
•
•
•
Lighting control and panel (p. 152)
•
•
•
Ignition modes (p. 385)
Active high beam (p. 157)
Daytime running lights (p. 154)
Replacing the high beam headlight bulbs
(p. 577)
Replacing the low beam headlight bulbs
(p. 576)
Steering wheel lever with lighting ring.
High beam flash
Move the steering wheel lever slightly
backward to the high beam flash mode.
The high beams will illuminate until the
lever is released.
High beams
The high beams can be activated when
the lighting ring is in mode
2 or
2
When the low beams are on.
156
English 
