2019-2026 Volvo V90 SUV WHEELS AND TIRES -> When changing wheels User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

WHEELS AND TIRES -> When changing wheels for Your Volvo V90 SUV Second Generation (2019-2026)

WHEELS AND TIRES  
When changing wheels  
Tool kit  
Related information  
When changing wheels (p. 522)  
•
•
•
•
The wheels can be changed, e.g. to switch to  
snow tires or spare tires. Follow the applica-  
ble instructions for removing and installing  
the wheel.  
Tools for e.g. towing or changing wheels are  
provided in the vehicle's cargo compartment.  
Jack* (p. 523)  
Tire sealing system (p. 531)  
Attaching and removing the towing eyelet  
(p. 431)  
Changing to tires of another  
dimension  
Make sure that the tire dimension is approved  
for use on the vehicle.  
Related information  
Removing a wheel (p. 524)  
Installing a wheel (p. 526)  
Tool kit (p. 522)  
•
•
•
•
•
•
Jack*  
Snow tires (p. 529)  
Spare wheel (p. 527)  
Wheel bolts (p. 523)  
Tool for removing the plastic wheel bolt  
covers  
Funnel for refilling fluids  
Wheel bolt key* and towing eyelet  
The foam block under the cargo compartment  
floor contains the towing eyelet, the tire seal-  
ing system, the tool for removing plastic wheel  
bolt covers and the tool for removing the lock-  
ing wheel bolts.  
If the vehicle is equipped with a spare tire*12, a  
jack and lug wrench are provided.  
12  
Not available on all models.  
522  
* Option/accessory.  
WHEELS AND TIRES  
Jack*  
Wheel bolts  
The wheel bolts hold the wheel in place on  
the wheel hub.  
Only use rims that have been tested and  
approved by Volvo and are included in Volvo's  
original product range.  
CAUTION  
The jack can be used to lift the vehicle to e.g.  
change a wheel.  
When not in use, the jack* should be  
kept in its storage compartment under  
the cargo compartment floor.  
•
•
The jack provided with your vehicle is  
intended to be used only in temporary  
situations such as changing wheels in  
the event of a flat tire. Only the jack  
that came with your particular model  
should be used to lift the vehicle. If the  
vehicle needs to be lifted more fre-  
quently or for a prolonged period, using  
a garage jack or hoist is recommended.  
Always follow this device's instructions  
for use.  
Use a torque wrench to check that the wheel  
bolts are tightened correctly.  
Do not grease the wheel bolt threads.  
WARNING  
The wheel bolts may need to be tightened  
again several days after a wheel change.  
Temperature fluctuations and vibrations  
can cause them to loosen slightly.  
The jack needs to be cranked together to the  
correct position in order to fit.  
CAUTION  
The wheel bolts should be tightened to  
140 Nm (103 ft. lbs.). Over-tightening or  
under-tightening could damage the threa-  
ded joints.  
For vehicles with Leveling Control*: If the  
vehicle is equipped with the optional pneu-  
matic suspension, it must be turned off before  
the vehicle is lifted on a jack.  
Related information  
Locking wheel bolts*  
Tool kit (p. 522)  
•
A tool for removing the locking wheel bolts is  
located in the foam block under the cargo  
compartment floor.  
Hoisting the vehicle (p. 565)  
•
Related information  
Removing a wheel (p. 524)  
•
Installing a wheel (p. 526)  
•
* Option/accessory. 523  
WHEELS AND TIRES  
1. Turn on the vehicle's hazard warning  
flashers if a wheel change must be per-  
formed in an area with traffic.  
Removing a wheel  
WARNING  
Wheel changes must always be carried out  
correctly. The following instructions show  
how to remove a wheel and what is impor-  
tant to keep in mind.  
Apply the parking brake and put the  
gear selector in the Park (P) position.  
•
•
2. Apply the parking brake and put the gear  
selector in P, or first gear if the vehicle has  
a manual transmission.  
Block the wheels standing on the  
ground, use rigid wooden blocks or  
large stones.  
CAUTION  
For vehicles with Leveling Control*: If the  
vehicle is equipped with pneumatic sus-  
pension, this must be switched off before  
the vehicle is lifted with the jack*.  
When not in use, the jack* should be  
kept in its storage compartment under  
the cargo compartment floor.  
•
•
Check that the jack is not damaged,  
the threads are properly lubricated and  
it is free from dirt.  
•
•
The jack provided with your vehicle is  
intended to be used only in temporary  
situations such as changing wheels in  
the event of a flat tire. Only the jack  
that came with your particular model  
should be used to lift the vehicle. If the  
vehicle needs to be lifted more fre-  
quently or for a prolonged period, using  
a garage jack or hoist is recommended.  
Always follow this device's instructions  
for use.  
Be sure the jack is on a firm, level, non-  
slippery surface and that it is upright  
and not leaning.  
3. Take out the jack*, lug wrench* and tool for  
removing the plastic covers, which are  
stowed in the foam block.  
The jack must correctly engage in the  
jack attachment.  
•
•
No objects should be placed between  
the base of the jack and the ground, or  
between the jack and the attachment  
bar on the vehicle.  
Never let anyone remain in the vehicle  
when it is raised on a jack.  
•
•
If a tire must be changed near passing  
traffic, make sure all passengers move  
to a safe location.  
Use a jack intended for the vehicle  
when changing a tire. For any other  
job, use stands to support the vehicle.  
•
•
Tool for removing the plastic covers on the wheel  
bolts.  
4. Place chocks in front of and behind the  
wheels that are still on the ground. For  
example, use heavy wooden blocks or  
large stones.  
Never crawl under or allow any part of  
your body to be extended under a vehi-  
cle supported by a jack.  
524  
* Option/accessory.  
WHEELS AND TIRES  
5. Using the lug wrench, screw the towing  
eye into place as far as possible according  
to the instructions.  
8. When hoisting the vehicle, it is important  
that the jack or garage lift arms are posi-  
tioned on the designated points under the  
vehicle. The triangle markings on the plas-  
tic cover indicate where the jack attach-  
ment points/lifting points are located.  
There are two jack attachment points on  
each side of the vehicle. There is a groove  
for the jack at each attachment point.  
10. Crank it up until it is properly aligned and  
it is in contact with the vehicle's jack  
attachment point. Make sure the top of  
the jack (or the garage lift arms) is cor-  
rectly positioned in the attachment point,  
with the bump on the top of the jack in the  
recess in the attachment point and the  
base positioned vertically under the  
attachment point.  
11. Turn the jack so that the crank is as far as  
possible from the side of the vehicle,  
which will position the jack's arms per-  
pendicular to the vehicle's direction of  
movement.  
CAUTION  
12. Raise the vehicle until the wheel to be  
changed can move freely. Unscrew the  
wheel bolts and lift off the wheel.  
The towing eyelet must be screwed into  
the lug wrench* as far as possible.  
Related information  
6. Remove the plastic covers from the wheel  
bolts using the designated tool.  
Leveling control settings* (p. 415)  
When changing wheels (p. 522)  
Hoisting the vehicle (p. 565)  
Jack* (p. 523)  
•
•
•
•
•
7. With the vehicle still on the ground, use  
the lug wrench/towing eye to loosen the  
wheel bolts ½-1 turn by pressing down-  
ward (counterclockwise).  
9. Position the jack under the attachment  
point being used, ensuring that the sur-  
face is firm, flat and not slippery.  
Attaching and removing the towing eyelet  
(p. 431)  
Installing a wheel (p. 526)  
•
* Option/accessory. 525  
WHEELS AND TIRES  
Never crawl under or allow any part of  
your body to be extended under a vehi-  
cle supported by a jack.  
Installing a wheel  
•
WARNING  
Wheel changes must always be carried out  
correctly. The following instructions show  
how to install a wheel and what is important  
to keep in mind.  
Apply the parking brake and put the  
gear selector in the Park (P) position.  
•
•
Block the wheels standing on the  
ground, use rigid wooden blocks or  
large stones.  
The vehicle must be raised high enough so  
that the wheel you are removing can turn  
freely.  
CAUTION  
When not in use, the jack* should be  
kept in its storage compartment under  
the cargo compartment floor.  
•
•
Check that the jack is not damaged,  
the threads are properly lubricated and  
it is free from dirt.  
•
•
1. Clean the contact surfaces between the  
wheel and the wheel hub.  
The jack provided with your vehicle is  
intended to be used only in temporary  
situations such as changing wheels in  
the event of a flat tire. Only the jack  
that came with your particular model  
should be used to lift the vehicle. If the  
vehicle needs to be lifted more fre-  
quently or for a prolonged period, using  
a garage jack or hoist is recommended.  
Always follow this device's instructions  
for use.  
2. Lift the wheel into place. Tighten the  
wheel bolts securely.  
Be sure the jack is on a firm, level, non-  
slippery surface and that it is upright  
and not leaning.  
Do not grease the wheel bolt threads.  
The jack must correctly engage in the  
jack attachment.  
•
•
3. Lower the vehicle so that the wheel can-  
not rotate.  
No objects should be placed between  
the base of the jack and the ground, or  
between the jack and the attachment  
bar on the vehicle.  
Never let anyone remain in the vehicle  
when it is raised on a jack.  
•
•
If a tire must be changed near passing  
traffic, make sure all passengers move  
to a safe location.  
Use a jack intended for the vehicle  
when changing a tire. For any other  
job, use stands to support the vehicle.  
•
526  
* Option/accessory.  
WHEELS AND TIRES  
Spare wheel13  
4. Tighten the wheel bolts in a crisscross pat-  
tern (as shown in illustration). It is impor-  
tant that the wheel bolts are securely  
NOTE  
The spare wheel is a Temporary Spare and  
can be used to temporarily replace a punc-  
tured tire on one of the vehicle's regular  
wheels.  
The spare tire is only intended for temporary  
use. Replace it with a normal wheel as soon as  
possible.  
After inflating a tire, always replace the  
valve cap to help prevent valve damage  
caused by gravel, dirt, etc.  
•
•
tightened. Tighten to 140 Nm (103 ft. lbs.).  
Use a torque wrench to check torque.  
Use plastic valve caps only. Metal caps  
could corrode and become difficult to  
remove.  
The driving characteristics of the vehicle  
change and ground clearance reduces when  
the spare wheel is used. Do not wash the vehi-  
cle in an automatic car wash while using the  
Temporary Spare.  
Related information  
When changing wheels (p. 522)  
Hoisting the vehicle (p. 565)  
Jack* (p. 523)  
•
•
•
•
•
•
The recommended tire pressure must be  
maintained regardless of at which position the  
temporary spare wheel is used on the vehicle.  
Tool kit (p. 522)  
Removing a wheel (p. 524)  
Saving a new inflation pressure in the  
If the spare wheel is damaged, a new one can  
be purchased from a Volvo retailer.  
monitoring system* (p. 519)  
5. Press the plastic covers onto the wheel  
bolts.  
Checking tire pressure (p. 515)  
•
6. Check the tire inflation pressure and store  
the new inflation pressure in the tire pres-  
sure monitoring system*.  
WARNING  
Current legislation prohibits the use of the  
"Temporary Spare" tire other than as a  
temporary replacement for a punctured  
tire. It must be replaced as soon as possi-  
ble by a standard tire. Road holding and  
handling may be affected with the "Tempo-  
rary Spare" in use. Do not drive faster than  
80 km/h (50 mph).  
WARNING  
The wheel bolts may need to be tightened  
again several days after a wheel change.  
Temperature fluctuations and vibrations  
can cause them to loosen slightly.  
13  
Not available on all models.  
}}  
* Option/accessory. 527  
WHEELS AND TIRES  
||  
Handling spare tires  
Follow these instructions regarding handling  
the spare wheel.  
WARNING  
CAUTION  
The vehicle must never be driven with  
more than one "Temporary Spare" tire  
mounted.  
The vehicle must not be driven with wheels  
of different dimensions or with a spare tire  
other than the one that came with the vehi-  
cle. The use of different size wheels can  
seriously damage your vehicle's transmis-  
sion.  
•
•
Accessing the spare wheel  
Driving with a spare wheel may alter  
the driving characteristics of the vehi-  
cle. Replace the spare wheel with a  
normal wheel as soon as possible.  
The spare wheel is smaller than the  
normal wheel, which affects the vehi-  
cle's ground clearance. Watch for high  
curbs and do not wash the vehicle in  
an automatic car wash when a spare  
wheel is mounted.  
•
Related information  
When changing wheels (p. 522)  
•
Recommended tire pressure (p. 517)  
•
Follow the manufacturer's recom-  
mended tire inflation pressure for the  
spare wheel.  
•
This illustration is generic and appearance may vary.  
The spare tire is located in the spare wheel  
well under the cargo compartment with the  
outside of the wheel facing downward. The  
spare tire is secured with a bolt that goes  
through the tire and attaches it to the body.  
The foam block contains all tools needed to  
change a wheel.  
On all-wheel drive vehicles, the drive  
on the rear axle can be disconnected.  
•
•
If the spare wheel is mounted on the  
front axle, snow chains must not be  
used.  
The spare wheel must not be repaired.  
•
1. Lift the rear edge of the cargo compart-  
ment floor.  
2. Unscrew the retaining bolt.  
3. Lift out the spare wheel.  
528  

Related Topics

WHEELS AND TIRES
Tires Snow chains Tire sealing system
LOADING, STORAGE AND PASSENGER COMPARTMENT
Cargo compartment

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot