DISPLAYS AND VOICE CONTROL -> Driver display and settings for Your Volvo XC40 SUV Second Generation (2022-2026)

DISPLAYS AND VOICE CONTROL  
Open one of the doors.  
Driver display  
The driver display shows information about  
the car and driving.  
WARNING  
The driver display contains gauges, indicators  
and indicator and warning symbols. The con-  
tent of the driver display depends on the car's  
equipment, settings and which functions are  
active at that time.  
If the driver display should extinguish, not  
illuminate on activation/start or be fully or  
partially illegible, the car must not be used.  
You should visit a workshop immediately.  
Volvo recommends an authorised Volvo  
workshop.  
The driver display is activated as soon as a  
door is opened, i.e. in ignition position 0. The  
driver display extinguishes after a while if it is  
not used. To reactivate it, proceed with one of  
the following:  
WARNING  
In the event of a fault in the driver display  
the information on e.g. brakes, airbags or  
other safety systems may not be shown. In  
which case, the driver cannot check the  
status of the car's systems or receive cur-  
rent warnings and information.  
The figure is schematic - parts may vary depending  
on car model.  
Depress the brake pedal.  
Activate ignition position I.  
Location in the driver display:  
On the left  
In the middle  
On the right  
Tachometer/ECO gaugeA  
Gear shift indicator  
Speedometer  
Indicator and warning symbols  
Outside temperature gauge  
Clock  
Trip meter  
OdometerB  
Drive mode  
Cruise control and speed limiter information  
Messages, in some cases with graphics  
Door and seatbelt information  
Media player  
Fuel gauge  
Road Sign Information*  
Start/stop function status  
Distance to empty tank  
Instantaneous fuel consumption  
Navigation map*  
}}  
* Option/accessory. 77  
DISPLAYS AND VOICE CONTROL  
||  
On the left  
In the middle  
Phone  
On the right  
App menu (activated via steering wheel keypad)  
Voice recognition  
CompassA  
A
Depends on drive mode selected.  
Accumulated mileage.  
B
Messages in the driver display (p. 93)  
Dynamic symbol  
The dynamic symbol in its  
basic form.  
Managing the app menu in the driver dis-  
play (p. 92)  
Drive modes* (p. 424)  
The centre of the driver display contains a  
dynamic symbol that changes appearance for  
different types of message. An amber or red  
marker around the symbol indicates the  
degree of severity of a control or warning mes-  
sage.  
Examples of indicator symbol.  
With an animation, the basic shape can be  
turned into a graphic showing where a prob-  
lem is situated, or in order to clarify informa-  
tion.  
Related information  
Driver display settings (p. 79)  
Indicator and warning symbols (p. 85)  
Trip computer (p. 80)  
78  
* Option/accessory.  
DISPLAYS AND VOICE CONTROL  
Driver display settings  
Settings via the centre display  
Selecting information type  
2. Tap on System System Languages  
Settings for the driver display's display  
options can be made via the driver display's  
app menu and via the centre display's set-  
tings menu.  
and Units System Language to select  
language.  
1.  
Tap on Settings in the centre display's  
top view.  
> A change will affect the language in all  
displays.  
2. Press My Car Displays Driver  
Display Information.  
These settings are personal and are saved  
automatically to the active driver profile.  
Settings via the driver display's app  
menu  
3. Select what should be shown in the back-  
ground:  
Related information  
Driver display (p. 77)  
Show no information in background  
Managing the app menu in the driver dis-  
play (p. 92)  
Show information for current  
playing media  
Other settings in the centre display's top  
view (p. 120)  
Show navigation even if no route is  
set  
Selecting theme  
1.  
Tap on Settings in the centre display's  
top view.  
2. Tap on My Car Displays Display  
The figure is schematic - parts may vary depending  
on car model.  
Themes  
3. Select a theme (appearance) for the driver  
display:  
The app menu is opened and controlled using  
the right-hand keypad on the steering wheel.  
Glass  
In the app menu, you can choose which infor-  
mation is shown on the driver display from:  
Minimalistic  
Performance  
Chrome Rings  
trip computer  
media player  
phone  
Selecting language  
1.  
Tap on Settings in the centre display's  
navigation system*.  
top view.  
* Option/accessory. 79  
DISPLAYS AND VOICE CONTROL  
Units for distance, speed, etc. can be changed  
via system settings in the centre display.  
Fuel gauge  
The fuel gauge in the driver display shows the  
fuel level in the tank.  
Trip computer  
The car's trip computer records vales such as  
e.g. distance, fuel consumption and average  
speed whilst driving.  
In order to facilitate fuel-efficient driving, infor-  
mation is recorded about both instantaneous  
and average fuel consumption. The informa-  
tion from the trip computer can be shown in  
the driver display.  
Trip meter  
There are two trip meters, TM and TA.  
TM can be reset manually and TA is reset  
automatically if the car is not used for at least  
four hours.  
The following information is registered while  
driving:  
Mileage  
Driving time  
Average speed  
Average fuel consumption  
The figure is schematic - parts may vary depending  
on car model.  
The values apply from the trip meter's latest  
reset.  
The beige zone in the fuel gauge indicates the  
quantity of fuel in the tank.  
Odometer  
The odometer records the car's total mileage.  
This value cannot be reset to zero.  
When the fuel level is low, the fuel pump sym-  
bol illuminates and turns amber colour. The  
trip computer also shows the distance to  
empty tank.  
Examples of trip computer information in the driver  
display. The figure is schematic - parts may vary  
depending on car model.  
Instantaneous fuel consumption  
This gauge shows the fuel consumption that  
the car has at the moment. The value is upda-  
ted approximately every second.  
The following meters are included in the trip  
computer:  
Related information  
Driver display (p. 77)  
Trip meter  
Filling fuel (p. 441)  
Distance to empty tank  
The trip computer calculates the  
remaining mileage with the fuel  
available in the tank.  
Odometer  
Fuel tank - volume (p. 656)  
Instantaneous fuel consumption  
Distance to empty tank  
Tourist - alternative speedometer  
80  
DISPLAYS AND VOICE CONTROL  
The calculation is based on the average fuel  
consumption over the last 30 km (20 miles)  
and the remaining drivable fuel quantity.  
Show trip statistics in the centre display  
(p. 83)  
Show trip data in the driver display  
The trip computer's recorded and calculated  
values can be shown in the driver display.  
The values are saved in a trip computer app.  
Via the app menu, you can choose which  
information is shown on the driver display.  
Driver display (p. 77)  
When the gauge shows "----", there is not  
enough fuel left to be able to calculate the  
remaining mileage. Refuel as soon as possible.  
Changing system units (p. 120)  
NOTE  
There may be a slight deviation if the driv-  
ing style has been changed.  
An economic driving style generally results in a  
longer driving distance.  
Tourist - alternative speedometer  
The alternative digital speedometer makes it  
easier to drive in countries where speed limit  
signs are in a different unit than that shown in  
the car's instruments.  
Open and navigate in the app menu1 using the right-  
hand steering wheel keypad.  
The digital speed is then shown in the oppo-  
site unit to that shown in the analogue speed-  
ometer. If the analogue speedometer is gradu-  
ated in mph, the digital speedometer shows  
the corresponding speed in km/h and vice  
versa.  
App menu  
Left/right  
Up/down  
Confirm  
Related information  
Show trip data in the driver display  
(p. 81)  
Resetting the trip meter (p. 82)  
}}  
81  
DISPLAYS AND VOICE CONTROL  
|| 1. Open the app menu in the driver display  
3. Scroll down to the option buttons to  
select which information to show in the  
driver display:  
Resetting the trip meter  
Reset the trip meter using the left-hand stalk  
switch.  
by pressing (1).  
(It is not possible to open the app menu  
while there is an unacknowledged mes-  
sage in the driver display. The message  
first has to be confirmed by pressing the O  
button (4) before the app menu can be  
opened.)  
Odometer  
Distance to empty tank  
Tourist (alternative speedometer)  
Mileage for trip meter TM, TA, or no  
display of mileage  
2. Navigate to the trip computer app to left  
or right with (2).  
Instantaneous fuel consumption, aver-  
age consumption for TM or TA, alterna-  
tively, no display of fuel consumption  
> The top four menu rows show meas-  
ured values for trip meter TM. The next  
four menu rows show measured values  
for trip meter TA. Scroll up or down in  
the list with (3).  
Select or deselect an option with the O  
button (4). The change is made immedi-  
ately.  
Reset all information in trip meter TM (i.e.  
mileage, average consumption, average  
speed and driving time) with a long press  
on the RESET button on the left-hand  
stalk switch.  
Related information  
Trip computer (p. 80)  
Resetting the trip meter (p. 82)  
Pressing the RESET button resets only  
the mileage.  
The trip meter TA can only be reset automati-  
cally when the car has not been used for four  
or more hours.  
Related information  
Trip computer (p. 80)  
1
The figure is schematic - parts may vary depending on car model.  
82  
DISPLAYS AND VOICE CONTROL  
Show trip statistics in the centre  
display  
Trip statistics from the trip computer are dis-  
played graphically in the centre display and  
provide an overview that facilitates more fuel-  
efficient driving.  
Settings for trip statistics  
Reset or adjust settings for trip statistics.  
1.  
Open the Driver performance app in app  
view in order to show the trip statistics.  
Open the Driver  
performance app in app  
view in order to show the trip  
statistics.  
Each bar in the diagram sym-  
bolises a distance of 1, 10 or  
100 km, alternatively miles. The bars are filled  
in from the right as driving progresses. The bar  
on the far right shows the value for the current  
distance.  
2.  
Press Preferences to  
Trip statistics from the trip computer2.  
change graph scale. Select resolution 1,  
10 or 100 km/miles for the bar.  
Related information  
Settings for trip statistics (p. 83)  
reset data after every trip. Performed  
when the car has been stationary for  
more than 4 hours.  
Trip computer (p. 80)  
The average fuel consumption and total driv-  
ing time are calculated since the last time the  
trip statistics were reset.  
reset data for the current trip.  
Trip statistics, calculated average con-  
sumption and total driving time are always  
reset simultaneously.  
Units for distance, speed, etc. can be changed  
via system settings in the centre display.  
Related information  
Show trip statistics in the centre display  
(p. 83)  
Trip computer (p. 80)  
Resetting the trip meter (p. 82)  
2
The figure is schematic - parts may vary depending on car model.  
83  
DISPLAYS AND VOICE CONTROL  
zone is then adjusted automatically based on  
the location of the car. For certain types of  
navigation systems, the current location  
(country) must also be set to obtain the right  
time zone. If Auto Time is not selected, time  
and data are adjusted with arrow up or arrow  
down on the touch screen.  
Date and time  
The clock is shown in both the driver display  
and the centre display.  
Outside temperature gauge  
The outside temperature is shown in the  
driver display.  
A sensor detects the temperature outside of  
the car.  
Clock location  
Summer time  
In certain countries, it is possible to select the  
Auto Daylight Saving Time setting for auto-  
matic setting of summer time. For other coun-  
tries, the Daylight Saving Time setting can  
be selected manually.  
Related information  
Driver display (p. 77)  
Other settings in the centre display's top  
view (p. 120)  
In certain situations, messages and informa-  
tion may cover the clock in the driver display.  
If the car has been stationary, the gauge may  
display a temperature reading that is too high.  
In the centre display, the clock is located at  
the top right of the status bar.  
When the outside temperature is in  
the range –5 °C to +2 °C (23 °F to  
36 °F), a snowflake symbol lights up  
that warns of potentially slippery  
conditions.  
Date and time settings  
Select Settings System Date and  
Time in the centre display's top view to  
change settings for time and date format.  
Change the unit for the temperature gauge,  
etc. via system settings in the centre display's  
top view.  
Adjust the date and time by pressing the  
up or down arrow on the touch screen.  
Automatic time for cars with GPS  
When the car is equipped with a navigation  
system, Auto Time can be selected. The time  
Related information  
Driver display (p. 77)  
Changing system units (p. 120)  
84  
DISPLAYS AND VOICE CONTROL  
Indicator and warning symbols  
Fault in brake system  
Collision risk  
The indicator and warning systems alert the  
driver to the fact that a function is activated, a  
system is working, or a defect or serious error  
has occurred.  
An error has occurred on the  
braking system.  
City Safety warns of a risk of col-  
lision with other vehicles, pedes-  
trians, cyclists or large animals.  
Read the message on the driver  
display and contact a workshop.  
Volvo recommends that an  
authorised Volvo workshop is  
contacted.  
Low oil pressure  
Red symbols  
Warning  
The engine oil pressure is too  
low. Stop the engine immedi-  
ately and check the engine oil  
level, top up if necessary.  
The red warning symbol illumi-  
nates when a fault has been  
Parking brake  
detected which could affect the  
safety or drivability of the car. An  
explanatory text is shown on the  
driver display at the same time.  
Light illuminated permanently:  
The parking brake is activated.  
If the symbol lights up and the oil  
level is normal, read the message  
on the display and contact a  
workshop. Volvo recommends  
that an authorised Volvo work-  
shop is contacted.  
Flashing: an error has occurred  
with the parking brake. Read the  
message in the driver display.  
The warning symbol can also illu-  
minate in conjunction with other  
symbols.  
Faults in the electrical system  
An error has occurred on the  
electrical system.  
Amber symbols  
Seatbelt reminder  
Information  
Illuminates or flashes when  
someone in the car is not wear-  
ing a seatbelt.  
Read the message on the driver  
display and contact a workshop.  
Volvo recommends that an  
authorised Volvo workshop is  
contacted.  
A fault has occurred in one of the  
car's systems. Read the message  
in the driver display.  
Airbags  
The information symbol can also  
illuminate in conjunction with  
other symbols.  
An error has been detected in  
any of the car's safety systems.  
High engine temperature  
Read the message on the driver  
display and contact a workshop.  
Volvo recommends that an  
authorised Volvo workshop is  
contacted.  
The engine temperature is too  
high. Read the message in the  
driver display.  
Fault in brake system  
An error has occurred on the  
braking system. Read the mes-  
sage in the driver display.  
}}  
85  
DISPLAYS AND VOICE CONTROL  
||  
Green symbols  
ABS fault  
Fault in the headlamp system  
Automatic brake  
The system is disengaged. The  
car's regular brake system con-  
tinues to work, but without the  
ABS function.  
A fault has occurred on the head-  
lamp system. Read the message  
in the driver display.  
The function is activated and the  
service brake or parking brake is  
operating.  
Lane assistance  
AdBlue system (diesel)  
Front fog lamps  
Lane assistance warns/inter-  
venes.  
Low AdBlue level or fault in  
AdBlue system.  
The front fog lamp is switched  
on.  
Stability system  
Emissions system  
Position lamps  
Light on permanently: a fault has  
occurred in the system.  
Emissions systems fault. Drive to  
a workshop for checking. Volvo  
recommends that an authorised  
Volvo workshop is contacted.  
The position lamps are switched  
on.  
Flashing: the system is working.  
Left and right-hand direction  
indicator  
Stability system, sport mode  
Sport mode is selected.  
Rear fog lamp  
The direction indicator is being  
used.  
The rear fog lamp is illuminated.  
Blue symbols  
Tyre pressure system  
Active main beam  
Low tyre pressure.  
Active main beam is activated  
and switched on.  
White/grey symbols  
If there is a fault in the tyre pres-  
sure system, the symbol will  
flash for approx. 1 minute and  
then illuminate with a constant  
glow. This may be because the  
system cannot detect or warn of  
low tyre pressure as intended.  
Active main beam  
Main beam  
Active main beam is activated,  
but does not come on.  
Main beam is switched on.  
Preconditioning  
Engine and compartment  
heater/air conditioning pre-con-  
dition the car.  
86  
DISPLAYS AND VOICE CONTROL  
don't promise that this software works.  
License agreement for the driver  
display  
Lane assistance  
However, we will be interested in any kind of  
bug reports. (`as is' distribution) o You can use  
this software for whatever you want, in parts  
or full form, without having to pay us. (`royalty-  
free' usage) o You may not pretend that you  
wrote this software. If you use it, or only parts  
of it, in a program, you must acknowledge  
somewhere in your documentation that you  
have used the FreeType code. (`credits') We  
specifically permit and encourage the  
inclusion of this software, with or without  
modifications, in commercial products. We  
disclaim all warranties covering The FreeType  
Project and assume no liability related to The  
FreeType Project. Finally, many people asked  
us for a preferred form for a credit/disclaimer  
to use in compliance with this license. We  
thus encourage you to use the following text:  
White symbol: Lane assistance is  
on and road lines are detected.  
A license is an agreement for the right to  
operate a certain activity or the right to use  
someone else's entitlement according to the  
terms and conditions in the agreement. The  
following text is Volvo's agreement with the  
manufacturer or developer.  
Grey symbol: Lane assistance is  
on but road lines are not  
detected.  
Rain sensor  
Freetype Project License  
The rain sensor is activated.  
3rd Party Software Disclaimers and License  
Agreements Confidential ID 06-00004-004  
39 / 75 Revision 06.00A, 2015-06-09  
2006-Jan-27 Copyright 1996-2002, 2006  
by David Turner, Robert Wilhelm, and Werner  
Lemberg.  
Related information  
Driver display (p. 77)  
Introduction  
The FreeType Project is distributed in several  
archive packages; some of them may contain,  
in addition to the FreeType font engine,  
various tools and contributions which rely on,  
or relate to, the FreeType Project. This license  
applies to all files found in such packages, and  
which do not fall under their own explicit  
license. The license affects thus the FreeType  
font engine, the test programs, documentation  
and makefiles, at the very least. This license  
was inspired by the BSD, Artistic, and IJG  
(Independent JPEG Group) licenses, which all  
encourage inclusion and use of free software  
in commercial and freeware products alike. As  
a consequence, its main points are that: o We  
"Portions of this software are copyright ©  
2013 The FreeType Project  
}}  
87  
DISPLAYS AND VOICE CONTROL  
||  
AUTHORS OR COPYRIGHT HOLDERS BE  
LIABLE FOR ANY DAMAGES CAUSED BY  
THE USE OR THE INABILITY TO USE, OF  
THE FREETYPE PROJECT. '  
acknowledge us. However, no fee need be  
paid to us.  
Legal Terms  
0. Definitions – Throughout this license, the  
terms `package', `FreeType Project', and  
`FreeType archive' refer to the set of files  
originally distributed by the authors (David  
Turner, Robert Wilhelm, and Werner Lemberg)  
as the `FreeType Project', be they named as  
alpha, beta or final release. `You' refers to the  
licensee, or person using the project, where  
`using' is a generic term including compiling  
the project's source code as well as linking it  
to form a `program' or `executable'. This  
program is referred to as `a program using the  
FreeType engine'. This license applies to all  
files distributed in the original FreeType  
Project, including all source code, binaries and  
documentation, unless otherwise stated in the  
file in its original, unmodified form as  
distributed in the original archive. If you are  
unsure whether or not a particular file is  
covered by this license, you must contact us  
to verify this. The FreeType Project is  
copyright (C) 1996-2000 by David Turner,  
Robert Wilhelm, and Werner Lemberg. All  
rights reserved except as specified below.  
3. Advertising – Neither the FreeType authors  
and contributors nor you shall use the name of  
the other for commercial, advertising, or  
promotional purposes without specific prior  
written permission. We suggest, but do not  
require, that you use one or more of the  
following phrases to refer to this software in  
your documentation or advertising materials:  
`FreeType Project', `FreeType Engine',  
`FreeType library', or `FreeType Distribution'.  
As you have not signed this license, you are  
not required to accept it. However, as the  
FreeType Project is copyrighted material, only  
this license, or another one contracted with  
the authors, grants you the right to use,  
distribute, and modify it. Therefore, by using,  
distributing, or modifying the FreeType  
Project, you indicate that you understand and  
accept all the terms of this license.  
2. Redistribution – This license grants a  
worldwide, royalty-free, perpetual and  
irrevocable right and license to use, execute,  
perform, compile, display, copy, create  
derivative works of, distribute and sublicense  
the FreeType Project (in both source and  
object code forms) and derivative works  
thereof for any purpose; and to authorize  
others to exercise some or all of the rights  
granted herein, subject to the following  
conditions: o Redistribution of source code  
must retain this license file (`FTL.TXT')  
unaltered; any additions, deletions or changes  
to the original files must be clearly indicated in  
accompanying documentation. The copyright  
notices of the unaltered, original files must be  
preserved in all copies of source files. o  
Redistribution in binary form must provide a  
disclaimer that states that the software is  
based in part of the work of the FreeType  
Team, in the distribution documentation. We  
also encourage you to put an URL to the  
FreeType web page in your documentation,  
though this isn't mandatory. These conditions  
apply to any software derived from or based  
on the FreeType Project, not just the  
4. Contacts – There are two mailing lists  
related to FreeType: o [email protected].  
Discusses general use and applications of  
FreeType, as well as future and wanted  
additions to the library and distribution. If you  
are looking for support, start in this list if you  
haven't found anything to help you in the  
documentation. o freetype-  
1. No Warranty – THE FREETYPE PROJECT  
IS PROVIDED `AS IS' WITHOUT WARRANTY  
OF ANY KIND, EITHER EXPRESS OR  
IMPLIED, INCLUDING, BUT NOT LIMITED  
TO, WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR  
[email protected]. Discusses bugs, as well  
as engine internals, design issues, specific  
unmodified files. If you use our work, you must  
PURPOSE. IN NO EVENT WILL ANY OF THE  
88  
DISPLAYS AND VOICE CONTROL  
licenses, porting, etc. Our home page can be  
PARTY FOR DIRECT, INDIRECT, SPECIAL,  
INCIDENTAL, OR CONSEQUENTIAL  
DAMAGES ARISING OUT OF THE USE OF  
THIS SOFTWARE AND ITS  
This software is provided 'as-is', without any  
express or implied warranty. In no event will  
the author be held liable for any damages  
arising from the use of this software.  
Permission is granted to anyone to use this  
software for any purpose, including  
commercial applications, and to alter it and  
redistribute it freely, subject to the following  
restrictions:  
HarfBuzz / UCDN License  
Copyright © 2010,2011,2012 Google, Inc.  
Copyright © 2012 Mozilla Foundation  
Copyright © 2011 Codethink Limited  
DOCUMENTATION, EVEN IF THE  
COPYRIGHT HOLDER HAS BEEN ADVISED  
OF THE POSSIBILITY OF SUCH DAMAGE.  
THE COPYRIGHT HOLDER SPECIFICALLY  
DISCLAIMS ANY WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE  
IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE. THE SOFTWARE  
PROVIDED HEREUNDER IS ON AN "AS IS"  
BASIS, AND THE COPYRIGHT HOLDER HAS  
NO OBLIGATION TO PROVIDE  
Copyright © 2008,2010 Nokia  
Corporation and/or its subsidiary(-ies)  
1. The origin of this software must not be  
misrepresented; you must not claim that  
you wrote the original software. If you use  
this software in a product, an  
Copyright © 2009 Keith Stribley  
Copyright © 2009 Martin Hosken and SIL  
International  
Copyright © 2007 Chris Wilson  
Copyright © 2006 Behdad Esfahbod  
Copyright © 2005 David Turner  
acknowledgement in the product  
documentation would be appreciated but  
is not required.  
MAINTENANCE, SUPPORT, UPDATES,  
ENHANCEMENTS, OR MODIFICATIONS.  
2. Altered source versions must be plainly  
marked as such, and must not be  
misrepresented as being the original  
software.  
Copyright ©  
2004,2007,2008,2009,2010 Red Hat,  
Inc.  
Libunibreak License  
This library is released under an open-source  
licence, the zlib/libpng licence. Please check  
the file LICENCE for details. Apart from using  
the algorithm, part of the code is derived from  
the data provided under http://  
Terms of Use may apply: URL:http://  
Copyright © 1998-2004 David Turner and  
3. This notice may not be removed or altered  
from any source distribution.  
Werner Lemberg  
For full copyright notices consult the individual  
files in the package. Permission is hereby  
granted, without written agreement and  
without license or royalty fees, to use, copy,  
modify, and distribute this software and its  
documentation for any purpose, provided that  
the above copyright notice and the following  
two paragraphs appear in all copies of this  
software. IN NO EVENT SHALL THE  
LICENSE:  
Copyright (C) 2008-2012 Wu Yongwei  
<wuyongwei at gmail dot com>  
Copyright (C) 2012 Tom Hacohen <tom  
dot hacohen at samsung dot com>  
COPYRIGHT HOLDER BE LIABLE TO ANY  
}}  
89  
DISPLAYS AND VOICE CONTROL  
||  
associated documentation (the "Software") to  
deal in the Data Files or Software without  
restriction, including without limitation the  
rights to use, copy, modify, merge, publish,  
distribute, and/or sell copies of the Data Files  
or Software, and to permit persons to whom  
the Data Files or Software are furnished to do  
so, provided that (a) the above copyright  
notice(s) and this permission notice appear  
with all copies of the Data Files or Software,  
(b) both the above copyright notice(s) and this  
permission notice appear in associated  
documentation, and (c) there is clear notice in  
each modified Data File or in the Software as  
well as in the documentation associated with  
the Data File(s) or Software that the data or  
software has been modified. THE DATA FILES  
AND SOFTWARE ARE PROVIDED "AS IS",  
WITHOUT WARRANTY OF ANY KIND,  
EXPRESS OR IMPLIED, INCLUDING BUT  
NOT LIMITED TO THE WARRANTIES OF  
MERCHANTABILITY, FITNESS FOR A  
PARTICULAR PURPOSE AND  
ACTION, ARISING OUT OF OR IN  
CONNECTION WITH THE USE OR  
Unicode Inc. License Agreement  
EXHIBIT 1 UNICODE, INC. LICENSE  
AGREEMENT - DATA FILES AND  
SOFTWARE Unicode Data Files include all  
data files under the directories http://  
PERFORMANCE OF THE DATA FILES OR  
SOFTWARE. Except as contained in this  
notice, the name of a copyright holder shall  
not be used in advertising or otherwise to  
promote the sale, use or other dealings in  
these Data Files or Software without prior  
written authorization of the copyright holder.  
Software includes any source code published  
in the Unicode Standard or under the  
USER: Carefully read the following legal  
agreement. BY DOWNLOADING,  
INSTALLING, COPYING OR OTHERWISE  
USING UNICODE INC.'S DATA FILES ("DATA  
FILES"), AND/OR SOFTWARE  
("SOFTWARE"), YOU UNEQUIVOCALLY  
ACCEPT, AND AGREE TO BE BOUND BY,  
ALL OF THE TERMS AND CONDITIONS OF  
THIS AGREEMENT. IF YOU DO NOT AGREE,  
DO NOT DOWNLOAD, INSTALL, COPY,  
DISTRIBUTE OR USE THE DATA FILES OR  
SOFTWARE. COPYRIGHT AND  
NONINFRINGEMENT OF THIRD PARTY  
RIGHTS. IN NO EVENT SHALL THE  
COPYRIGHT HOLDER OR HOLDERS  
PERMISSION NOTICE Copyright ©  
INCLUDED IN THIS NOTICE BE LIABLE FOR  
ANY CLAIM, OR ANY SPECIAL INDIRECT OR  
CONSEQUENTIAL DAMAGES, OR ANY  
DAMAGES WHATSOEVER RESULTING  
FROM LOSS OF USE, DATA OR PROFITS,  
WHETHER IN AN ACTION OF CONTRACT,  
NEGLIGENCE OR OTHER TORTIOUS  
1991-2010 Unicode, Inc. All rights reserved.  
Distributed under the Terms of Use in http://  
is hereby granted, free of charge, to any  
person obtaining a copy of the Unicode data  
files and any associated documentation (the  
"Data Files") or Unicode software and any  
90  
DISPLAYS AND VOICE CONTROL  
Adler; it does not include third-party code. If  
you redistribute modified sources, we would  
appreciate that you include in the file  
ChangeLog history information documenting  
your changes. Please read the FAQ for more  
information on the distribution of modified  
source versions.  
CONTRIBUTORS "AS IS" AND ANY  
ZLIB Data Compression Library License  
Agreement  
EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE  
IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE ARE DISCLAIMED.  
IN NO EVENT SHALL THE COPYRIGHT  
OWNER OR CONTRIBUTORS BE LIABLE  
FOR ANY DIRECT, INDIRECT, INCIDENTAL,  
SPECIAL, EXEMPLARY, OR  
CONSEQUENTIAL DAMAGES (INCLUDING,  
BUT NOT LIMITED TO, PROCUREMENT OF  
SUBSTITUTE GOODS OR SERVICES; LOSS  
OF USE, DATA, OR PROFITS; OR BUSINESS  
INTERRUPTION) HOWEVER CAUSED AND  
ON ANY THEORY OF LIABILITY, WHETHER  
IN CONTRACT, STRICT LIABILITY, OR TORT  
(INCLUDING NEGLIGENCE OR  
OTHERWISE) ARISING IN ANY WAY OUT  
OF THE USE OF THIS SOFTWARE, EVEN IF  
ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGE.  
(C) 1995-2010 Jean-loup Gailly and Mark  
Adler This software is provided 'as-is', without  
any express or implied warranty. In no event  
will the authors be held liable for any damages  
arising from the use of this software.  
Permission is granted to anyone to use this  
software for any purpose, including  
commercial applications, and to alter it and  
redistribute it freely, subject to the following  
restrictions:  
GLEW Licence (Modified BSD Licence)  
The OpenGL Extension Wrangler Library  
Copyright (C) 2002-2008, Milan Ikits  
<milan.ikits@ieee org>  
Copyright (C) 2002-2008, Marcelo E.  
Magallon <[email protected]>  
1. The origin of this software must not be  
misrepresented; you must not claim that  
you wrote the original software. If you use  
this software in a product, an  
Copyright (C) 2002, Lev Povalahev  
All rights reserved.  
acknowledgment in the product  
documentation would be appreciated but  
is not required.  
Redistribution and use in source and binary  
forms, with or without modification, are  
permitted provided that the following  
2. Altered source versions must be plainly  
marked as such, and must not be  
misrepresented as being the original  
software.  
conditions are met: Redistributions of source  
code must retain the above copyright notice,  
this list of conditions and the following  
disclaimer. * Redistributions in binary form  
must reproduce the above copyright notice,  
this list of conditions and the following  
disclaimer in the documentation and/or other  
materials provided with the distribution. * The  
name of the author may be used to endorse or  
promote products derived from this software  
without specific prior written permission. THIS  
SOFTWARE IS PROVIDED BY THE  
Related information  
Driver display (p. 77)  
3. This notice may not be removed or altered  
from any source distribution.  
Jean-loup Gailly Mark Adler [email protected]  
[email protected] If you use the zlib  
library in a product, we would appreciate *not*  
receiving lengthy legal documents to sign. The  
sources are provided for free but without  
warranty of any kind. The library has been  
entirely written by Jean-loup Gailly and Mark  
COPYRIGHT HOLDERS AND  
91  
DISPLAYS AND VOICE CONTROL  
App menu in the driver display  
Managing the app menu in the  
driver display  
The app menu in the driver display is oper-  
ated with the steering wheel's right-hand  
keypad.  
App  
Functions  
The app menu in the driver display provides  
quick access to commonly used functions for  
certain apps.  
Trip com-  
puter  
Selection of trip meter, selec-  
tion of what to show in the  
driver display, etc.  
Media  
player  
Selection of active source for  
the media player.  
Phone  
Calling a contact from the call  
list.  
Navigation  
Guide to destination, etc.  
Related information  
Driver display (p. 77)  
Overview of centre display (p. 97)  
The figure is schematic.  
Managing the app menu in the driver dis-  
play (p. 92)  
The app menu and the steering wheel's right-hand  
keypad. The figure is schematic.  
The app menu in the driver display can be  
used instead of the centre display and is con-  
trolled using the right-hand keypad on the  
steering wheel. The app menu makes it easier  
to switch between different apps or functions  
within the apps without having to let go of the  
steering wheel.  
Open/close  
Left/right  
Up/down  
Confirm  
App menu functions  
Different apps give access to different types of  
functions. The following apps and their associ-  
ated functions can be controlled from the app  
menu:  
92  
DISPLAYS AND VOICE CONTROL  
If the app menu is opened again, the functions  
of the most recently selected app are shown  
first.  
Opening/closing the app menu  
Messages in the driver display  
Press on open/close (1).  
The driver display can show messages to  
inform or assist the driver in the event of dif-  
ferent events.  
> The app menu opens/closes.  
Related information  
NOTE  
App menu in the driver display (p. 92)  
It is not possible to open the app menu  
while there is an unacknowledged mes-  
sage in the driver display. The message has  
to be confirmed first before the app menu  
can be opened.  
Messages in the driver display (p. 93)  
The app menu closes automatically after a  
period of inactivity or after certain options  
have been selected.  
Example of message in the 8-inch driver display. The  
figure is schematic - parts may vary depending on  
car model.  
Navigating and selecting in the app  
menu  
1. Navigate between the apps by pressing  
on the left or right (2).  
> Functions for previous/next app are  
shown in the app menu.  
2. Browse through the functions for the  
selected app by tapping on up or down  
(3).  
3. Confirm or highlight an option for the  
function by pressing on confirm (4).  
> The function is activated and for some  
options the app menu then closes.  
}}  
93  
DISPLAYS AND VOICE CONTROL  
||  
Service messages  
Shown below is a selection of important serv-  
ice messages and their meanings.  
Message  
Specification  
Time for regular service -  
contact a workshopB.  
Shown when the service  
date has passed.  
Regular main-  
tenance  
Message  
Specification  
Maintenance  
overdue  
Stop safelyA  
Stop and switch off the  
engine. Serious risk of  
damage - consult a work-  
shopB.  
A function has been tem-  
porarily switched off and  
is reset automatically  
while driving or after  
starting again.  
Temporarily  
offA  
Stop and switch off the  
engine. Serious risk of  
damage - consult a work-  
shopB.  
Turn off  
engineA  
Examples of messages in the driver display. The fig-  
ure is schematic - parts may vary depending on car  
model.  
A
Part of message, shown together with information on  
where the problem has arisen.  
An authorised Volvo workshop is recommended.  
B
Contact a workshopB to  
check the car immedi-  
ately.  
The driver display shows messages that are of  
high priority for the driver.  
Service urgent  
Drive to work-  
shopA  
Related information  
Managing messages in the driver display  
(p. 95)  
Messages can be shown in different parts of  
the driver display depending on what other  
information is currently being displayed. After  
a while, or when the message has been  
acknowledged/action taken if required, the  
message disappears from the driver display. If  
a message needs to be saved, it is placed in  
the Car Status app, which is opened from the  
app view in the centre display.  
Contact a workshopB to  
check the car as soon as  
possible.  
Handling a message saved from the driver  
display (p. 96)  
Service  
requiredA  
Message in centre display (p. 128)  
Time for regular service -  
contact a workshopB.  
Shown before the next  
service date.  
Regular main-  
tenance  
Book time for  
maintenance  
Message composition may vary and they can  
be shown together with graphics, symbols or  
buttons for acknowledging the message or  
accepting a request, for example.  
Time for regular service -  
contact a workshopB.  
Shown at the next serv-  
ice date.  
Regular main-  
tenance  
Time for main-  
tenance  
94