SAFETY -> Seatbelts and Seatbelt tensioners for Your Volvo XC40 SUV Second Generation (2022-2026)

SAFETY  
||  
WHIPS and child seats  
Seatbelts  
Heavy braking can have serious consequen-  
ces if the seatbelts are not used.  
It is important that the seatbelt lies against the  
body so it can provide good protection. Do not  
lean the backrest too far back. The seatbelt is  
designed to protect in a normal seating posi-  
tion.  
WARNING  
The protection provided by the car to children  
seated in a child seat or on a booster cushion  
is not diminished by WHIPS.  
Do not squeeze rigid objects between the  
rear seat cushion and the front seat's back-  
rest.  
If a backrest in the rear seat is lowered  
then any load must be secured to prevent it  
from sliding up to the front seat backrest in  
the event of a collision.  
Related information  
Safety (p. 44)  
Manual front seat (p. 172)  
Power* front seat (p. 173)  
Rear Collision Warning* (p. 349)  
WARNING  
WARNING  
Remember not to clip or hook the seatbelt  
to hooks or other interior fittings, as this  
prevents the belt from tightening properly.  
If a backrest in the rear seat is lowered or a  
rear-facing child seat is used in the rear  
seat, the corresponding front seat must be  
moved forward so that it does not make  
contact with the lowered backrest or child  
seat.  
WARNING  
The seatbelts and airbags interact. If a  
seatbelt is not used or is used incorrectly,  
this may diminish the protection provided  
by the airbag in the event of a collision.  
Seating position  
For good protection from WHIPS the driver  
and passenger must have the correct seating  
position and make sure that the system's  
function is not obstructed.  
Set the correct seating position in the front  
seat before driving starts.  
Driver and front seat passenger should sit in  
the centre of the seat with as little space as  
possible between the head and the head  
restraint.  
46  
* Option/accessory.  
SAFETY  
2. Lock the belt by inserting the locking tab  
in the intended buckle.  
Putting on and taking off seatbelts  
Make sure that all passengers have fastened  
their seatbelts before starting to drive.  
WARNING  
Never modify or repair the seatbelts your-  
self. Volvo recommends that an authorised  
Volvo workshop should be contacted.  
> A loud "click" indicates that the belt has  
locked.  
Putting on seatbelts  
If the seatbelt has been subjected to a  
major load, such as in conjunction with a  
collision, the entire seatbelt must be  
replaced. Some of the seatbelt's protective  
properties may have been lost even if the  
seatbelt does not appear damaged. The  
seatbelt must also be replaced if it shows  
signs of wear or damage. The new seatbelt  
must be type-approved and designed for  
installation at the same location as the  
replaced seatbelt.  
1. Pull out the seatbelt slowly and make sure  
it is not twisted or damaged.  
WARNING  
Always insert the tongue of the seatbelt  
into the buckle on the correct side. The  
seatbelts and buckles would otherwise  
possibly not function as intended in the  
event of a collision. There is a risk of seri-  
ous injury.  
NOTE  
The seatbelt is equipped with an inertia  
reel that is locked in the following situa-  
tions:  
if the belt is extended too quickly.  
during braking and acceleration.  
if the car leans heavily.  
Related information  
Safety (p. 44)  
when driving in bends.  
Seatbelt tensioner (p. 49)  
Putting on and taking off seatbelts  
(p. 47)  
Door and seatbelt reminder (p. 50)  
}}  
47  
SAFETY  
|| 3. In the front seats the seatbelt can be  
WARNING  
adjusted for height.  
Each seatbelt is designed for only one per-  
son.  
WARNING  
Remember not to clip or hook the seatbelt  
to hooks or other interior fittings, as this  
prevents the belt from tightening properly.  
WARNING  
The seatbelt must pass over the shoulder (not down  
over the arm).  
Do not make any damages on seatbelts nor  
insert any foreign objects into a buckle. The  
seatbelts and buckles would then possibly  
not function as intended in the event of a  
collision. There is a risk of serous injury.  
4. Tension the hip strap over the lap by pull-  
ing the diagonal shoulder belt up towards  
the shoulder.  
Press together the seat mounting and  
move the seatbelt up or down.  
Position the belt as high as possible with-  
out it chafing against your throat.  
Taking off seatbelts  
1. Press the red button on the seatbelt  
buckle and then let the belt retract.  
2. If the seatbelt does not retract fully, feed it  
in by hand so that it does not hang loose.  
Related information  
Seatbelts (p. 46)  
Seatbelt tensioner (p. 49)  
Door and seatbelt reminder (p. 50)  
The hip strap must be positioned low down (not over  
the abdomen).  
48  
SAFETY  
When the critical situation has come to an  
end, the seatbelt and the electric seatbelt pre-  
tensioner are restored automatically, but they  
can also be restored manually.  
Activating and deactivating passenger air-  
bag* (p. 54)  
Seatbelt tensioner  
The car is fitted with standard seatbelt ten-  
sioners and electric* seatbelt tensioners that  
can tension the seatbelts in critical situations  
and collisions.  
City Safety(p. 330)  
Rear Collision Warning* (p. 349)  
IMPORTANT  
Standard seatbelt tensioner  
The seatbelts in the front seat and at the outer  
seats in the rear are equipped with a standard  
belt pretensioner.  
If the passenger airbag is deactivated, the  
electric seatbelt tensioner on the passen-  
ger side will also be deactivated.  
The seatbelt tensioner tensions the seatbelt in  
the event of a collision with sufficient force in  
order to more effectively restrain the occu-  
pant.  
WARNING  
Never modify or repair the seatbelts your-  
self. Volvo recommends that an authorised  
Volvo workshop should be contacted.  
Electric seatbelt tensioner*  
If the seatbelt has been subjected to a  
major load, such as in conjunction with a  
collision, the entire seatbelt must be  
replaced. Some of the seatbelt's protective  
properties may have been lost even if the  
seatbelt does not appear damaged. The  
seatbelt must also be replaced if it shows  
signs of wear or damage. The new seatbelt  
must be type-approved and designed for  
installation at the same location as the  
replaced seatbelt.  
The driver and front passenger seatbelts are  
equipped with an electric seatbelt tensioner.  
The seatbelt tensioners work together and can  
be activated together with the driver support  
systems City Safety and Rear Collision  
Warning. In critical situations, such as panic  
braking, driving off the road (e.g. the car rolls  
into a ditch, lifts off the ground or hits some-  
thing in the terrain), skidding, or risk of colli-  
sion, the seatbelt can be tensioned by the  
seatbelt tensioner's electric motor.  
Related information  
Seatbelts (p. 46)  
The electric seatbelt tensioner helps to adjust  
the occupant to a better position, reducing the  
risk of striking the car's interior and improving  
the effect of safety systems, such as the car's  
airbags.  
Putting on and taking off seatbelts (p. 47)  
Resetting the electric seatbelt tensioner*  
(p. 50)  
* Option/accessory. 49  
SAFETY  
Resetting the electric seatbelt  
Door and seatbelt reminder  
Seatbelt reminder  
tensioner*  
The system reminds unbelted occupants to  
wear a seatbelt, and also warns about an  
open door, bonnet or lid.  
The electric seatbelt tensioner is designed to  
be reset automatically, but the seatbelt ten-  
sioner can be reset manually if the belt  
remains extended.  
Driver display graphics  
1. Stop the car at a safe place.  
2. Unfasten the seatbelt and then refasten it.  
> The seatbelt and electric seatbelt ten-  
sioner are reset.  
WARNING  
Visual reminder in the roof console.  
Never modify or repair the seatbelts your-  
self. Volvo recommends that an authorised  
Volvo workshop should be contacted.  
A visual reminder is given in the roof console  
and by means of the warning symbol in the  
driver display.  
If the seatbelt has been subjected to a  
major load, such as in conjunction with a  
collision, the entire seatbelt must be  
replaced. Some of the seatbelt's protective  
properties may have been lost even if the  
seatbelt does not appear damaged. The  
seatbelt must also be replaced if it shows  
signs of wear or damage. The new seatbelt  
must be type-approved and designed for  
installation at the same location as the  
replaced seatbelt.  
The acoustic reminder is dependent on speed,  
driving time and distance.  
Graphics in the driver display with different types of  
warnings. The warning colour on the door and tail-  
gate is dependent on the vehicle's speed.  
The belt status of the driver and passengers is  
shown in the driver display's graphic when a  
belt is buckled or unbuckled.  
The driver display's graphics show which  
seats in the car are occupied by belted and  
unbelted passengers.  
Child seats are not covered by the seatbelt  
reminder system.  
The same graphic also shows if the bonnet,  
tailgate or any door is open.  
Front seat  
The graphic can be acknowledged by pressing  
the O button on the right-hand steering wheel  
keypad.  
A visual and acoustic reminder remind the  
driver and front seat passenger to use a seat-  
belt if either of them is not wearing one.  
Related information  
Seatbelt tensioner (p. 49)  
Seatbelts (p. 46)  
50  
* Option/accessory.