Get SEATS AND STEERING WHEEL -> Manual and Power front seats Guide for Volvo XC40 SUV Second Generation (2022-2026)

SEATS AND STEERING WHEEL

Raise/lower the seat by means of pump-

ing the lever up/down.

Storing a position for seat and door mir-

rors (p. 174)

Manual front seat

The car's front seats have a range of setting

options in order to enhance comfort.

•

Change the backrest inclination by turning

the control knob.

Using a stored position for seat and door

mirrors (p. 175)

Adjusting* the length of the seat cushion

in the front seat (p. 176)

Adjusting the lumbar support* in the front

seat (p. 176)

Adjust the seat forward/backward by lift-

ing the handle and adjusting the distance

to the steering wheel and pedals. Check

that the seat is locked after the position

has been adjusted.

You can manually adjust the height of the

head restraints by pressing in the button.

WARNING

Change the length* of the seat cushion by

pulling the lever up and moving the seat

cushion forward/backward by hand.

Adjust the position of the driver's seat

before setting off, never while driving.

Make sure that the seat is in locked posi-

tion in order to avoid personal injury in the

event of heavy braking or an accident.

Raise/lower the front edge of the seat

cushion* by pumping up/down.¹

Change the lumbar support* by pressing

the button upward/downward/forward/

back.

Related information

Power* front seat (p. 173)

•

Adjusting the power* front seat (p. 173)

•

1

Only applies to the driver's seat.

172

* Option/accessory.

SEATS AND STEERING WHEEL

Adjusting* the length of the seat cushion

in the front seat (p. 176)

•

Power* front seat

Adjusting the power* front seat

The car's front seats have a range of setting

options in order to enhance comfort. The

power seat can be moved forwards/back-

wards and upwards/downwards. The front

edge of the seat cushion can be raised/

lowered and the backrest inclination can be

changed. The lumbar support* can be

adjusted upwards/downwards/forwards/

backwards. Seat cushion length is adjusted

manually*.

Set to desired sitting position using the con-

trol on the front seat's seating section. Acti-

vate the lumbar support* by pressing the

four-way control.

Adjusting the lumbar support* in the front

seat (p. 176)

Seat setup can take place when the engine is

running and within a certain time after unlock-

ing the door without the engine running.

Adjustment can also be performed within a

certain time after the engine has been

switched off.

Activate and use the lumber support con-

trol by pressing the four-way control up/

down/forwards/back.

IMPORTANT

The power seats have overload protection

that is triggered if any seat is blocked by an

object. If this happens, remove the object

and then move the seat again.

Raise/lower the seat cushion front edge

by adjusting the control up/down.

Raise/lower the seat by means of adjust-

ing the control up/down.

Related information

Move the seat forward/backward by

adjusting the control forward/backward.

Manual front seat (p. 172)

•

Adjusting the power* front seat (p. 173)

Change the backrest inclination by adjust-

ing the control forward/backward.

Storing a position for seat and door mir-

rors (p. 174)

Only one movement (forward/back/up/down)

can be made at a time.

Using a stored position for seat and door

mirrors (p. 175)

•

}}

* Option/accessory. 173

SEATS AND STEERING WHEEL

|| The backrests of the front seats cannot be

2. Press and hold the M button depressed.

The light indicator in the button illumi-

nates.

Storing a position for seat and door

mirrors

lowered fully forward.

You can store the position for power* seat

and door mirrors in the memory buttons.

Store two different positions for the power

seat* and the door mirrors using the memory

buttons. The buttons are located on the inside

of one of the front doors or both*.

3. Within three seconds, press and hold the 1

or 2 button.

> When the position has been stored in

the selected memory button, an acous-

tic signal can be heard and the light

indicator in the M button extinguishes.

If none of the memory buttons is depressed

within three seconds then the M button extin-

guishes and no storing takes place.

The seat or the door mirrors must be readjus-

ted before a new memory can be set.

You can manually adjust the height of the

head restraints by pressing in the button.

Related information

Manual front seat (p. 172)

•

Related information

Power* front seat (p. 173)

Manual front seat (p. 172)

•

Adjusting the power* front seat (p. 173)

Power* front seat (p. 173)

Button M for storing settings.

Memory button.

Using a stored position for seat and door

mirrors (p. 175)

Storing a position for seat and door mir-

rors (p. 174)

Adjusting* the length of the seat cushion

in the front seat (p. 176)

Using a stored position for seat and door

mirrors (p. 175)

•

Memory button.

Adjusting the lumbar support* in the front

seat (p. 176)

Adjusting* the length of the seat cushion

in the front seat (p. 176)

Storing a position

1. Adjust seat and door mirrors to the

desired position.

Angling adjustment of the door mirrors

(p. 159)

Adjusting the lumbar support* in the front

seat (p. 176)

174

* Option/accessory.

SEATS AND STEERING WHEEL

Adjusting the lumbar support* in the front

seat (p. 176)

Closed front door

Using a stored position for seat

and door mirrors

If the positions for the power* seat and the

door mirrors have been stored, they can be

activated by using the memory buttons.

•

–

Hold one of the memory buttons 1 ( ) or

Angling adjustment of the door mirrors

(p. 159)

2 ( ) depressed until seat and door mir-

rors stop in the positions that are stored in

the selected memory button.

If the memory button is released, the move-

ment of the seat and door mirrors will be stop-

ped.

Using a stored setting

WARNING

Because the driver's seat can be

adjusted with the ignition off, children

should never be left unattended in the

vehicle.

•

Movement of the seat can be STOP-

PED at any time by pressing any but-

ton on the power seat control panel.

Do not adjust the seat while driving.

•

A stored setting can be used with the front

door either open or closed:

Make sure there is nothing under the

seats when they are being adjusted.

Open front door

–

Depress one of the memory buttons 1 (

)

Related information

or 2 ( ) with a short press. Power seat

and door mirrors move and then stop at

the positions stored in the selected mem-

ory button.

Manual front seat (p. 172)

•

Power* front seat (p. 173)

Adjusting the power* front seat (p. 173)

Storing a position for seat and door mir-

rors (p. 174)

Adjusting* the length of the seat cushion

•

in the front seat (p. 176)

* Option/accessory. 175

SEATS AND STEERING WHEEL

Using a stored position for seat and door

mirrors (p. 175)

•

Adjusting* the length of the seat

Adjusting the lumbar support* in

cushion in the front seat

the front seat

For increased comfort, you can adjust the

The lumbar support is adjusted using a con-

Adjusting the lumbar support* in the front

length of the seat cushion.

trol on the side of the seat cushion.

seat (p. 176)

Control for seat cushion adjustment.

Four-way button, located on the side of the seat's

seating section.

Grip the handle

and pull upwards.

on the front of the seat

1.

The four-way lumbar support is adjusted using

the four-way button (the round one) which is

located on the side of the seat's seating sec-

tion. The lumbar support can be adjusted for-

wards/backwards and upwards/downwards.

2. Adjust the length of the seat cushion.

3. Release the handle and make sure that the

seat cushion has reached the correct posi-

tion.

Related information

Manual front seat (p. 172)

•

Power* front seat (p. 173)

Adjusting the power* front seat (p. 173)

Storing a position for seat and door mir-

rors (p. 174)

176

* Option/accessory.

SEATS AND STEERING WHEEL -> Manual and Power front seats for Your Volvo XC40 SUV Second Generation (2022-2026)

Related Topics

SEATS AND STEERING WHEEL

Popular Owner Manuals

Latest Owner Manuals