2008-2017 Volvo XC60 SUV Loading and storage User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Loading and storage for Your Volvo XC60 SUV First Generation (2008-2017)

LOADING AND STORAGE  
05 Loading and storage  
Storage spaces  
The following is an overview of the storage  
compartments in the passenger compart-  
ment.  
05  
138  
05 Loading and storage  
Compartment in door panel  
Storage pocket on the front edge of the  
front seat cushions  
Glove compartment (p. 141)  
Storage compartment (p. 140), 12-volt  
socket (p. 140) and AUX input/USB con-  
nector*  
Rear seat cup holders  
Storage pocket  
Related information  
Vanity mirror (p. 141)  
12-volt socket in the cargo area* (p. 141)  
05  
139  
* Option/accessory, for more information, see Introduction.  
05 Loading and storage  
Tunnel console  
The tunnel console is located between the  
front seats.  
Tunnel console – 12-volt sockets  
The electrical sockets can be used for 12-volt  
accessories such as cell phone chargers and  
coolers. For the socket to supply current, the  
ignition must be in at least mode I (p. 79). The  
sockets are located between the cup holders  
in the tunnel console and on the rear side of  
the tunnel console (p. 140) for rear seat pas-  
sengers.  
12-volt socket in the rear center console  
The maximum current consumption is 10A  
(120W) if only one of the 12-volt sockets in  
the passenger compartment is in use. If both  
the front and rear sockets are used at the  
same time, the maximum current consump-  
tion per socket is 7.5A (90W).  
Storage compartment (for CDs, etc.)  
under armrest, AUX input/USB connec-  
tor.  
05  
Includes cup holder for driver and pas-  
senger, 12-volt socket (p. 140) and a  
small storage compartment.  
The auxiliary sockets can also be used to  
power a cigarette lighter. Accessory cigarette  
lighters and ashtrays can be purchased from  
your Volvo retailer.  
12-volt socket in the front tunnel console  
Related information  
Storage spaces (p. 138)  
WARNING  
Always keep the sockets covered when  
not in use.  
Related information  
Storage spaces (p. 138)  
12-volt socket in the cargo area* (p. 141)  
140  
* Option/accessory, for more information, see Introduction.  
05 Loading and storage  
Glove compartment  
The glove compartment provides a lockable  
storage compartment for small items.  
Vanity mirror  
The vanity mirrors are located on the upper  
side of the sun visors.  
12-volt socket in the cargo area*  
The 12-volt socket can be used e.g., to con-  
nect the tire sealing system's compressor  
(certain models) and other 12-volt accesso-  
ries.  
Vanity mirror with lighting  
The owner's manual and maps can be kept  
here. There are also holders for pens and fuel  
cards. The glove compartment can be locked  
manually with the key blade, see Locking/  
unlocking – glove compartment (p. 165).  
05  
The light comes on automatically when the  
cover is lifted.  
Fold down the cover to access the electrical  
socket.  
Related information  
Storage spaces (p. 138)  
NOTE  
Related information  
Storage spaces (p. 138)  
Bulbs – vanity mirror lighting (p. 342)  
The 12-volt socket in the cargo area pro-  
vides electrical current even when the igni-  
tion is switched off. Using the socket while  
the engine is not running will drain the bat-  
tery.  
Related information  
Storage spaces (p. 138)  
Tunnel console – 12-volt sockets (p. 140)  
141  
* Option/accessory, for more information, see Introduction.  
05 Loading and storage  
Loading – general  
Loading – roof load carriers  
WARNING  
The load carrying capacity of your vehicle is  
determined by factors such as the number of  
passengers, the amount of cargo, the weight  
of any accessories that may be installed, etc.  
Stop the engine, put the gear selector  
in P, and apply the parking brake  
when loading or unloading long  
objects.  
Using load carriers  
Load carriers are available as Volvo accesso-  
ries. Observe the following points when in  
use:  
The vehicle's driving characteristics  
may change depending on the weight  
and distribution of the load.  
To increase loading space, the rear seat  
backrests can be folded down, see Rear  
seats – folding backrest (p. 86).  
To avoid damaging your vehicle and to  
achieve maximum safety when driving,  
we recommend using the load carriers  
that Volvo has developed especially for  
your vehicle.  
A 44-pound (20 kg) object produces a  
force of 2,200 pounds (1,000 kg) in a  
head-on collision at 30 mph (50 km/h).  
When loading the cargo area, keep the fol-  
lowing in mind:  
Volvo-approved removable roof racks are  
Load objects in the cargo area against  
the backrest whenever possible.  
The cargo area and rear seat should  
not be loaded to a level higher than  
2 in. (5 cm) below the upper edge of  
the rear side windows. Objects placed  
higher than this level could impede the  
function of the Inflatable Curtain.  
designed to carry the maximum allowable  
roof load for this vehicle: 220 lbs (100 kg).  
For non-Volvo roof racks, check the man-  
ufacturer's weight limits for the rack.  
Unstable loads can be secured to the  
load anchoring eyelets with straps or web  
lashings to help keep them from shifting.  
Never exceed the rack manufacturer's  
weigh limits and never exceed the maxi-  
mum rated roof load of 220 lbs (100 kg).  
Stop the engine and apply the parking  
brake when loading or unloading long  
objects. The gear selector can be  
05  
Related information  
Load anchoring eyelets (p. 143)  
Avoid single-point loads. Distribute loads  
evenly.  
knocked out of position by long loads,  
which could set the vehicle in motion.  
Steel cargo grid (p. 147)  
Place heavier cargo at the bottom of the  
load.  
Loading – roof load carriers (p. 142)  
Secure the cargo correctly with appropri-  
ate tie-down equipment.  
Check periodically that the load carriers  
and load are properly secured.  
Remember that the vehicle's center of  
gravity and handling change when you  
carry a load on the roof.  
142  
05 Loading and storage  
The vehicle's wind resistance and fuel  
consumption will increase with the size of  
the load.  
Load anchoring eyelets  
WARNING  
The load anchoring eyelets on both sides of  
the vehicle are used to fasten straps, etc., to  
help anchor items in the cargo area.  
Cover sharp edges on long loads to  
help prevent injury to occupants.  
Secure the load to help prevent shift-  
ing during sudden stops.  
Drive smoothly. Avoid rapid starts, fast  
cornering and hard braking.  
WARNING  
Related information  
Loading – general (p. 142)  
Always secure large and heavy objects  
with a seat belt or cargo retaining  
straps.  
The two upper hooks shown in the illustra-  
tion are for holding grocery bags only.  
They are not intended for anchoring heavy  
objects.  
Load anchoring eyelets (p. 143)  
Always secure the load to help prevent  
it from moving in the event of sudden  
stops.  
Switch off the engine, apply the park-  
ing brake and put the gear selector in  
P when loading and unloading the  
vehicle.  
05  
Related information  
Loading – general (p. 142)  
143  
05 Loading and storage  
Your vehicle can be equipped with a cargo  
net made of strong nylon fabric that helps  
prevent objects in the cargo area from mov-  
ing forward into the passenger compartment.  
Grocery bag holder  
The grocery bag holder holds shopping bags  
in place.  
Cargo net – general information  
The cargo net helps protect passengers from  
objects in the cargo area in the event of a  
sudden stop or hard braking.  
The net can be attached in two different pla-  
ces:  
The cargo net is available in two versions.  
Rear position: behind the rear seat back-  
rest  
Front position: behind the front seat  
backrests  
WARNING  
Be sure that the cargo net's upper  
attachment hooks are properly  
inserted in the brackets and that the  
lower straps are correctly attached  
and pulled taut.  
Grocery bag holder under the floor of the cargo  
area  
05  
The grocery bag holder holds shopping bags  
in place.  
Version 1  
A damaged cargo net should never be  
used.  
1. Open the hatch in the floor of the cargo  
area.  
Objects in the cargo area should be  
securely anchored, even if the cargo  
net is correctly installed and in use.  
2. Secure the shopping bags with the strap.  
Related information  
Loading – general (p. 142)  
Related information  
Cargo net – mounting/removing (p. 145)  
Version 2  
144  
05 Loading and storage  
4. Mounting in the rear position: With the  
net's rod attached to the rear upper  
brackets, hook the lower straps in the  
floor eyelets in the cargo area. Pull the net  
strap taut.  
Cargo net – mounting/removing  
CAUTION  
Pressure from the front seats against the  
cargo net could damage the net and/or its  
brackets.  
Mounting the cargo net (version 1)  
The cargo net is easiest to put in place  
through one of the rear doors.  
1. Fold out the cargo net and be sure that  
the upper hinged rod is straight and  
locked in position.  
5. Pull the net strap taut.  
Mounting the cargo net (version 2)  
The easiest way to mount the cargo net is  
through one of the rear doors.  
2. Insert one end of the rod into the front or  
rear bracket (near the ceiling). Be sure  
that the lock on the lower strap is facing  
toward you.  
3. Insert the other end of the rod in the  
opposite bracket.  
– Be sure to press the end hooks on the  
rod as far forward as possible in the  
brackets.  
05  
Cargo net in front position  
Mounting in the front position: With the  
net's rod attached to the front upper  
brackets, hook the lower straps in the  
eyelets in the front seat rails. Attaching  
the net is easier if the front seat backrests  
are upright and the seats are moved  
slightly forward.  
Cargo net in rear position  
1. Fold out the cargo net.  
2. Insert one of the net's upper attachments  
into the front or rear bracket near the roof  
liner with the net's storage pockets facing  
rearward.  
If the front seats are moved rearward,  
they should not press hard against the  
net.  
Cargo net in rear position  
}}  
145  
05 Loading and storage  
||  
3. Insert the net's other attachment into the  
bracket on the opposite side of the vehi-  
cle. It is spring-loaded to help make  
mounting easier.  
Removing and storing the cargo net  
(version 2)  
CAUTION  
Pressure from the front seats against the  
cargo net could damage the net and/or its  
brackets.  
Release the lower hooks.  
Be sure to press the hooks as far forward  
into the brackets as possible.  
Remove the net's upper attachments  
from the ceiling brackets.  
Removing and storing the cargo net  
(version 1)  
4. Mounting in the rear position: With the  
net's hooks inserted into the rear upper  
brackets, attach the lower hooks to the  
floor eyelets in the cargo area.  
Fold the net.  
When not in use, the cargo net can be stored  
under floor of the cargo area.  
Related information  
Cargo net – general information (p. 144)  
05  
Press the release buttons on the locks on  
the straps and pull out a small section of  
the strap.  
Cargo net in front position  
Press in the catches on the straps' hooks  
and remove the hooks from the eyelet.  
Mounting in the front position: With the  
net's upper attachments in front upper brack-  
ets, attach the lower hooks to the eyelets in  
the front seat rails. Attaching the net is easier  
if the front seat backrests are upright and the  
seats are moved slightly forward.  
Fold up the net's rod at the center and  
roll up the net.  
When not in use, the cargo net can be stored  
under floor of the cargo area.  
If the front seats are moved rearward, they  
should not press hard against the net.  
146  
05 Loading and storage  
3. Press both sides of the cover until they  
Cargo area cover  
The cargo area cover can be used to conceal  
objects in the cargo area.  
Steel cargo grid  
click into place  
longer be visible.  
. The red mark will no  
Your vehicle can be equipped with a steel grid  
that helps prevent objects in the cargo area  
from moving forward into the passenger com-  
partment.  
4. Check that both ends of the cover are  
securely locked in place.  
Removing the cover  
1. Press one of the end pieces of the cover  
inward.  
2. Pull the cover carefully upward and out-  
ward. The other end will release automati-  
cally from its retaining bracket.  
Folding down the cargo area cover's  
rear flap  
The cargo area cover's rear flap points hori-  
zontally when the cover is retracted (rolled  
up). To fold it down:  
Use  
05  
Pull the cover over the cargo and hook it  
into the holes in the rear cargo area pil-  
lars.  
Folding the grid up/down  
Grasp the lowering edge of the grid and pull it  
rearward/upward, or push it downward/  
forward.  
Pull the flap slightly rearward past its sup-  
ports and fold it down.  
To retract (roll up) the cover, release it  
from the holes and guide it toward the  
rear seat backrest.  
NOTE  
On models equipped with this cover, it  
should be removed before a child seat is  
attached to the child restraint anchors.  
NOTE  
Installing the cover  
If the steel grid is to be used with the  
optional cargo area cover, the grid must  
be folded down before the cargo area  
cover is put in place.  
1. Press the end piece on one side of the  
cargo area cover into the retaining  
bracket in the side panel of the cargo  
Related information  
Loading – general (p. 142)  
area  
.
2.  
Do the same on the opposite side  
.
}}  
147  
05 Loading and storage  
||  
Installing the steel cargo grid  
For information about the necessary tools  
and procedures for installing/removing the  
steel cargo grid, please refer to the assembly  
instructions1 that were included when the grid  
was purchased.  
Related information  
Cargo area cover (p. 147)  
05  
1
Assembly instruction no. 30715972.  
148  

Related Topics

Popular Owner Manuals