Wheels and tires -> Installing a wheel for Your Volvo XC60 SUV 2020

WHEELS AND TIRES  
Never crawl under or allow any part of  
your body to be extended under a vehi-  
cle supported by a jack.  
Installing a wheel  
WARNING  
Wheel changes must always be carried out  
correctly. The following instructions show  
how to install a wheel and what is important  
to keep in mind.  
Apply the parking brake and put the  
gear selector in the Park (P) position.  
Block the wheels standing on the  
ground, use rigid wooden blocks or  
large stones.  
The vehicle must be raised high enough so  
that the wheel you are removing can turn  
freely.  
When not in use, the jack* should be  
kept in its storage compartment under  
the cargo compartment floor.  
Check that the jack is not damaged,  
the threads are properly lubricated and  
it is free from dirt.  
1. Clean the contact surfaces between the  
wheel and the wheel hub.  
The jack provided with your vehicle is  
intended to be used only in temporary  
situations such as changing wheels in  
the event of a flat tire. Only the jack  
that came with your particular model  
should be used to lift the vehicle. If the  
vehicle needs to be lifted more fre-  
quently or for a prolonged period, using  
a garage jack or hoist is recommended.  
Always follow this device's instructions  
for use.  
2. Lift the wheel into place. Tighten the  
wheel bolts securely.  
Be sure the jack is on a firm, level, non-  
slippery surface and that it is upright  
and not leaning.  
Do not grease the wheel bolt threads.  
The jack must correctly engage in the  
jack attachment.  
3. Lower the vehicle so that the wheel can-  
not rotate.  
No objects should be placed between  
the base of the jack and the ground, or  
between the jack and the attachment  
bar on the vehicle.  
Never let anyone remain in the vehicle  
when it is raised on a jack.  
If a tire must be changed near passing  
traffic, make sure all passengers move  
to a safe location.  
Use a jack intended for the vehicle  
when changing a tire. For any other  
job, use stands to support the vehicle.  
534  
* Option/accessory.  
WHEELS AND TIRES  
Spare wheel13  
4. Tighten the wheel bolts in a crisscross pat-  
tern (as shown in illustration). It is impor-  
tant that the wheel bolts are securely  
The spare wheel is a Temporary Spare and  
can be used to temporarily replace a punc-  
tured tire on one of the vehicle's regular  
wheels.  
The spare tire is only intended for temporary  
use. Replace it with a normal wheel as soon as  
possible.  
After inflating a tire, always replace the  
valve cap to help prevent valve damage  
caused by gravel, dirt, etc.  
tightened. Tighten to 140 Nm (103 ft. lbs.).  
Use a torque wrench to check torque.  
Use plastic valve caps only. Metal caps  
could corrode and become difficult to  
remove.  
The driving characteristics of the vehicle  
change and ground clearance reduces when  
the spare wheel is used. Do not wash the vehi-  
cle in an automatic car wash while using the  
Temporary Spare.  
Related information  
When changing wheels (p. 530)  
Hoisting the vehicle (p. 575)  
Jack* (p. 531)  
The recommended tire pressure must be  
maintained regardless of at which position the  
temporary spare wheel is used on the vehicle.  
Tool kit (p. 530)  
Removing a wheel (p. 532)  
Saving a new inflation pressure in the  
If the spare wheel is damaged, a new one can  
be purchased from a Volvo retailer.  
monitoring system* (p. 527)  
5. Press the plastic covers onto the wheel  
bolts.  
Checking tire pressure (p. 523)  
6. Check the tire inflation pressure and store  
the new inflation pressure in the tire pres-  
sure monitoring system*.  
WARNING  
Current legislation prohibits the use of the  
"Temporary Spare" tire other than as a  
temporary replacement for a punctured  
tire. It must be replaced as soon as possi-  
ble by a standard tire. Road holding and  
handling may be affected with the "Tempo-  
rary Spare" in use. Do not drive faster than  
80 km/h (50 mph).  
WARNING  
The wheel bolts may need to be tightened  
again several days after a wheel change.  
Temperature fluctuations and vibrations  
can cause them to loosen slightly.  
13  
Not available on all models.  
}}  
* Option/accessory. 535  

Related Topics