2025-2026 Volvo Xc70 SUV Locks and alarm -> Keyless drive* User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Locks and alarm -> Keyless drive* for Your Volvo Xc70 SUV Third Generation (2025-2026)

02 Locks and alarm
Keyless drive*
02
* Option/accessory, for more information, see Introduction.
55
Keyless lock and ignition system (only
PCC
1
)
General
The keyless drive function in the PCC allows
the car to be unlocked, driven and locked with-
out the need for a key. You simply have to have
the PCC with you. The system makes it easier
and more convenient to open the car, e.g.
when your hands are full.
Both of the car's PCCs incorporate the Keyless
function. Additional PCCs can be ordered, see
page 46.
PCC range
In order to open a door or the tailgate, a PCC
must be no more than approx. 1.5 metres from
the car door handle or tailgate. This means that
the person who wishes to lock or unlock a door
must have the PCC with him or her. It is not
possible to lock or unlock a door if the PCC is
on the opposite side of the car.
The red rings in the preceding illustration indi-
cate the range covered by the system's anten-
nas.
If all PCCs are removed from the car when the
engine is running or key position I or II is active
(see page 78) and if all doors are closed, then
a warning message is shown in the information
display and an audible reminder signal sounds
at the same time.
The warning message clears and the audio
reminder signal stops when the PCC is brought
back to the car after:
•
a door has been opened and closed
•
the PCC is inserted into the ignition switch
•
the READ button has been pressed.
Handling the PCC safely
If a PCC with keyless drive function is left in the
car, it is deactivated temporarily when the car
is locked. This prevents unauthorised entry.
However, if someone breaks into the car,
opens the door and finds the PCC, it can be
reactivated. It is therefore important to handle
all PCCs with great care.
IMPORTANT
Never leave a PCC behind in the car.
Interference to PCC function
Electromagnetic fields and screening can inter-
fere with the keyless drive system.
NOTE
Do not place/store the PCC near a mobile
phone or metal object - no closer than 10-15
cm.
If interference is experienced nonetheless, use
the PCC and the key blade as a remote control
key, see page 47.
1
Personal Car Communicator, see page 48.
02 Locks and alarm
Keyless drive*
02
56
* Option/accessory, for more information, see Introduction.
Locking
Cars with the keyless system have a button on the
outside door handles.
Lock the doors and the tailgate by pressing the
lock button on one of the door handles on the
outside.
All doors and the tailgate must be closed
before the car can be locked - otherwise the
car is not locked.
NOTE
On cars with automatic transmission, the
gear selector must be set in the P position
– otherwise the car cannot be locked or the
alarm armed.
Unlocking
Unlocking takes place when a hand grasps a
door handle or the tailgate's rubberised pres-
sure plate is actuated - open the door or tail-
gate as normal.
Unlocking with the key blade
Hole for key blade - to loosen the cover.
If central locking cannot be activated with the
PCC, e.g. if the batteries are discharged, then
the driver's door can be opened with the PCC's
detachable key blade (see page 49).
To access the lock cylinder, the door handle's
plastic cover must be removed - this is also
done with the key blade:
1. Press the key blade approx. 1 cm straight
up into the hole on the underside of the
door handle/cover - do not prize.
> The plastic cover loosens automatically
by means of the torque when the blade
is pushed straight up and into the open-
ing.
2. Then insert the key blade in the lock cylin-
der and unlock the door.
3. Refit the plastic cover after unlocking.
NOTE
When the driver's door is unlocked using the
key blade and is opened, the alarm is trig-
gered. It is switched off by inserting the PCC
in the ignition switch, see page 65.
Key memory
2
– driver's seat and door
mirrors
PCC memory function
If several people each with a PCC approach the
car, then the settings for seat and mirrors are
implemented for the person who opens the
driver's door.
After the driver's door has been opened by
person A with PCC-A, but person B with PCC-
2
Only in combination with power driver's seat and power mirrors.
02 Locks and alarm
Keyless drive*
02
* Option/accessory, for more information, see Introduction.
57
B shall drive, the settings can be changed in
three ways:
•
Standing by the driver's door, or sitting
behind the steering wheel, person B
presses their PCC's unlock button, see
page 47.
•
Select one of three possible memories for
seat adjustment with seat button 1-3, see
page 81.
•
Adjust seat and mirrors manually, see
page 81 and 101.
Lock settings
The Keyless function can be adapted by indi-
cating in the menu system MY CAR which
doors shall be unlocked, under
Car settings
Lock settings Keyless entry - there
select between
All doors unlock, Any door,
Doors on same side and Both front doors.
For a description of the menu system, see
page 146.
Antenna location
G021179
The keyless system has a number of integrated
antennae located around the car:
Tailgate, by wiper motor
Door handle, left rear
Roof, centre above rear seat
Cargo area, central and furthest in under
the floor
Door handle, right rear
Centre console, under the rear section
Centre console, under the front section.
WARNING
People with pacemaker operations should
not come closer than 22 cm to the keyless
system's antennae with their pacemaker.
This is to prevent interference between the
pacemaker and the keyless system.

Related Topics

Popular Owner Manuals