Car care
Touching up paintwork
•
•
•
Stir the primer thoroughly and apply using
a fine brush or matchstick (illustration 2).
When the primer is dry, apply the surface
coat with a brush.
Make sure the paint is well stirred and
apply several thin coats; allowing it to dry
between coats.
The procedure is the same for scratches,
but masking tape can be used to protect
undamaged paintwork (illustration 3).
Wait a day or so and then finish the repair
by polishing. Use a soft rag and apply
lapping paste sparingly.
1
2
•
•
3
Remove any paint residue with tape
Mask if necessary
Colour code
Minor stone chips and scratches
Material:
Make sure you have the right colour. The
colour code number is on the data plate in the
engine compartment.
•
•
•
•
•
Primer in a can
Paint in a can or a touch-up pen
Brush
Paintwork
Paint is an important part of the car’s
rustproofing and should therefore be
checked regularly. Repair paintwork damage
immediately so that it does not start to rust.
The most common types of paintwork
damage that you can repair yourself are:
Masking tape
If the stone chip has not gone down to
the bare metal and an unpainted colour
coat remains, you can add paint immedi-
ately after removing dirt.
Do as follows if the stone chip went
down to the bare metal:
•
•
minor stone chips and scratches
damage to wing edges and door
•
Fasten a piece of masking tape over the
damaged surface. Then remove the tape,
removing any paint residue (illustration 1).
When repairing paintwork, the car should be
clean and dry with a temperature above 15 °C.
NRS
English 
