Get Infotainment system Guide for Volvo XC90 SUV First Generation (2002-2014)

Infotainment system

Control panels

186

187

192

196

204

206

208

210

212

Audio system functions

Radio functions

CD/MD (option)

CD changer (option)

Menu settings and options – Audio

Telephone (option)

Telephone functions

Menu settings and options – Telephone

219

NUR

Infotainment system

Information – Entertainment

Infotainment is a system with integrated

audio and telephone functions. You can

easily and conveniently use your Infotainment

system using the joint control panel or the

steering wheel keypad. The control panel

display indicates the current function.

XC90 can be equipped with Dolby Surround

Pro Logic II (Premium Sound), which offers

an optimal sound experience very close to

being there with a broad, natural sound

profile.

The system also allows your passengers to

use headphones (option) with separate

sound sources.

NUS

Infotainment system

Control panels

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

20

19

18

17

16

1. On/Off - Audio

2. Volume

3. CD – shortcut button

4. AM/FM - shortcut button to switch

between FM1, FM2 and AM

5. Display

6. ENTER – select in the menu, activate a

selection or activate the telephone from

standby mode

11. EXIT/CLEAR – scroll back in the menu,

cancel a selection, put the telephone in

standby mode, or erase the previous

character when entering text and

numbers

19. IR receiver for remote controls (option)

20. Seek/change tracks/stations or scroll

forward and back when entering text

and digits

12. SIM card holder

13. Menu selection buttons

14. CD and CD changer eject

15. MD eject

16. CD player and CD changer (option)

17. MD player (option)

18. Station setting buttons/selecting CD

changer position (1-6), number/

character buttons for the telephone and

menu shortcuts

7. On/Off/Standby – Telephone

8. MY KEY – programmable shortcut key

for your favourite function

9. SELECTOR – select sound source

10. SOUND – make sound settings

NUT

Infotainment system

Control panels

Menus

1

In menu mode, you can check or modify

settings and programme new functions in the

system. The different menu alternatives are

shown in the display. Menu alternatives

followed by periods indicate that there are

several submenus.

Press the MENU button (1) to activate menu

mode.

The following applies in menu mode:

– The menu selection buttons are used to

scroll up or down in the menu.

– A long press on EXIT/CLEAR allows you

to leave menu mode.

Steering wheel keypad

Audio – Telephone

By holding the

you can fast forward or rewind in a song or

search for a radio station.

or

button depressed

– A brief press on EXIT/CLEAR allows you

to clear, cancel, decline an alternative or

go back one step in the menu structure.

– A press on ENTER allows you to confirm,

select or scroll from a submenu to the

next submenu.

The four buttons at the bottom of the steering

wheel keypad control both the radio and the

telephone. The function of the respective

button depends on which system is active.

The steering wheel keypad can be used to

adjust volume, shift between preset stations

and change CD/MD tracks.

To use these buttons for the telephone

functions, the telephone must be active, see

page 213.

To make audio system settings with these

buttons, the telephone must be in standby

mode (deactivated).

NUU

Infotainment system

•

Headphone users can choose from

– Hold the

or

button depressed to

among the presets of the frequency (AM,

FM1, FM2) previously set by the driver. In

some cases, this means that the driver

will not receive NEWS - or traffic infor-

mation even if TP/NEWS is selected.

The CD changer can only play one disc

and one song at a time.

fast forward/rewind or search for the next

strong station.

– Hold the SEL button depressed to switch

off the system.

– Use the volume control button to adjust

the volume of the respective headphones.

All headphones are switched off automati-

cally when the audio system is switched off

with the ignition key and must be activated

manually when the car is restarted.

For the best sound reproduction, we

recommend headphones with impedance

between 16-32 ohm. The sensitivity of these

should be equal to or greater than 102 dB.

The headphone socket is intended for

3.5 mm contacts and is located on the

bottom of the headphone panel (1).

Headphone sockets (option)

The door panels behind the second row of

seats contain headphone sockets. This

means that several passengers can listen to

different sound sources, such as CDs or the

radio, at the same time without disturbing

each other.

Headphones – limitations

•

If a set of headphones is connected to

the same source that is being sent

through the speakers, the headphones

controls cannot be used to change track

or station. This is so the driver is not

surprised by an unexpected change in

music.

Two sets of headphones can be connected

to each socket.

– Switch sound source with the SEL

button.

– Use the arrow keys,

or

, to change

•

If the driver uses the control panel to

select the same sound source as

someone wearing headphones, the driver

takes control of the sound source.

CD/MD tracks or switch between preset

stations.

NUV

Infotainment system

Control panels

8. Function not available

9. On/Off – Audio

2

4

5

6

7

8

9

1

2

3

Display

Remote control (option)

1. Memory – Stores radio stations. To

store a station:

– Press the Memory button

– Select Preset using Preset/Disc (5)

– Confirm your selection using the Memory

button

The display (2) shows the current function,

such as menu alternatives, messages,

telephone numbers, or settings.

Clean the display with a soft, dry cloth. Do not

use cleaning agent.

2. Volume

3. Seek/change tracks forward or back

4. Source – switch sound source

5. Preset/Disc – select CD changer

position or preset radio station

6. Auto – find and store the strongest

stations

7. Function not available

NVM

Infotainment system

Direct the remote control towards the IR

receiver (see illustration) that is located in the

dashboard.

NOTE! The remote control contains AAA

batteries (R03). If the remote control does

not work, first try replacing the batteries.

NVN

Infotainment system

Audio system functions

The selected sound source is shown on the

display.

1

2

3

4

1

MD can only be chosen using the

SELECTOR knob.

On/Off switch – Audio

Press the POWER button (1) to switch the

audio system on or off.

Volume control

Turn the knob (1) clockwise or anticlockwise

to raise or lower the volume, respectively. The

volume control is electronic and has no end

position. Volume can also be raised (+) or

lowered (–) using the steering wheel keypad.

If the audio system is active when the ignition

is switched off, it will reactivate automatically

when the car is restarted.

Pause mode

Selecting the sound source

There are two ways to select sound source:

When volume is in position zero, the CD/MD

player is put in pause mode. Reactivate the

player by turning up the volume.

By using the shortcut buttons CD (2), AM/FM

(3) or by using the SELECTOR knob (4):

Volume control – TP/PTY/

NEWS/ALARM

If a CD or the like is playing when the radio

receives a traffic bulletin, the CD player is put

in pause mode. The message is played at the

– Turn the SELECTOR knob to select

Radio (FM1, FM2 or AM), CD/CD

changer (option) or MD (option).

– Press the AM/FM button repeatedly to

scroll between FM1, FM2 and AM.

NVO

Infotainment system

volume selected for that type of message.

Playback of the originally selected sound

source is then resumed at the previous

volume. If volume is adjusted while the

bulletin is played, the new volume is saved

and used for the next bulletin.

The level for Surround can only be set if

Dolby Pro Logic II has been selected in the

menu.

1

2

The level for Subwoofer can only be set if

Subwoofer is activated.

Shown on the

Audio settings

display

Bass

BASS

Treble

TREBLE

BALANCE

Balance between the

left and right-hand

speakers

Audio settings

– Press the SOUND button (1).

Balance between the

front and rear

speakers

FADER

– Press the SOUND button repeatedly until

you come to the function you wish to set.

Choose BASS, TREBLE, FADER,

BALANCE, SUBWOOFER (option),

CENTRE (option) or SURROUND

(option).

– Use the SELECTOR knob (2) to adjust

the level. The display shows a scale from

min. to max. position. The middle

indicates the normal position.

Level for subwoofer

SUBWOOFER

(option)

Level for centre

speaker

CENTRE

(Premium

Sound)

Level for surround

sound

SURROUND

(Premium

Sound)

NOTE! The level for the centre speaker can

only be set if Dolby Pro Logic II (DPL II) or

three-channel stereo (3-CH) has been

selected from the menu.

NVP

Infotainment system

Audio system functions

– Select AUDIO SETTINGS in the menu

and press ENTER.

– Select SURROUND and press ENTER.

– Select Dolby AM/FM or Dolby CD/MD

and press ENTER.

– Select PRO LOGIC II, 3 CHANNEL or

OFF and press ENTER.

•

The symbol

PL II is shown in the

display if Pro Logic II has been selected.

3 CH is shown in the display if

3 CHANNEL has been selected.

OFF means the audio system is in normal

stereo mode.

Dolby Surround Pro Logic II is a

trademark of Dolby Laboratories Licensing

Corporation. Dolby Pro Logic II Surround

System is manufactured under license from

Dolby Laboratories Licensing Corporation.

SURROUND (option) Dolby

Surround Pro Logic II

Bass speaker – SUBWOOFER

(option)

The subwoofer helps the system provide

Dolby Surround Pro Logic II with centre

dashboard speaker provides a more realistic

audio experience. The normal left-right stereo

channels are divided into left-centre-right and

are coupled with surround sound from the

rear speakers. Surround sound can be

described as the types of residual tones

which are audible in a concert hall.

Dolby Surround Pro Logic II functions in CD

and MD modes. 3-Channel stereo is recom-

mended for AM and FM radio broadcasts.

Dolby Surround Pro Logic II is available for

Premium Sound audio only.

fuller sound and deeper bass.

– Select AUDIO SETTINGS in the menu

and press ENTER.

– Select SUBWOOFER and press ENTER.

A check in the box indicates that

SUBWOOFER is activated.

Equalizer FR (certain models)

This function is used to fine-tune the sound

from the front speakers.

– Select AUDIO SETTINGS in the menu

and press ENTER.

– Select Equalizer FR and press ENTER.

NVQ

Infotainment system

– Use the menu selection buttons or the

SELECTOR knob to set the level.

– Press ENTER to select the next

frequency. You can select five

frequencies.

– Press ENTER until you come to menu

mode to save any changes.

Equalizer RR (certain models)

This function is used to fine-tune the sound

from the rear speakers.

– Select AUDIO SETTINGS in the menu

and press ENTER.

– Select Equalizer RR and press ENTER.

– Use the menu selection buttons or the

SELECTOR knob to set the level.

– Press ENTER to select the next

frequency. You can select five

frequencies.

– Press ENTER until you come to menu

mode to save any changes.

NVR

Infotainment system

Radio functions

– Release the button when the desired

frequency shows in the display.

1

2

1

– Frequency can be adjusted with a short

press on one of the arrow keys,

or

.

– Manual adjustment mode stays in effect

five seconds after the last press.

Tuning

Storing stations

To store a selected station under one of the

station setting buttons 0-9 (1):

– Choose radio mode AM/FM1/FM2 using

the SELECTOR knob (2) or the AM/FM

button (1).

– Set the desired station.

– A short press on the

or

button is

– Press the button under which the station

is to be stored and keep it depressed.

The sound will disappear for a few

seconds and STATION STORED will be

shown in the display. The station is now

stored.

used to search for the next strong station.

– Press one of the buttons again to search

again.

Manually seek a known

frequency

– Hold the

or

button depressed.

MAN is shown in the display. The radio

scans slowly in the selected direction and

increases tempo after a few seconds.

NVS

Infotainment system

You can store up to 10 stations each for AM,

FM1 and FM2, i.e. a total of 30 stations.

from the set frequency band are now

stored in the autostore memory. If there

are no stations with sufficient signal

strength, NO AST FOUND is shown.

– The preset stations can be selected with

buttons 0-9.

– When the radio is in autostore mode,

AUTO is shown in the display. AUTO

disappears when you return to the

ordinary radio mode.

Radio

Frequency band

FM

AM(LW)

AM(MW)

87.5 - 108 MHz

153 - 279 kHz

522 - 1611 kHz

– Return to the ordinary radio mode by

pressing the AM/FM button or EXIT/

CLEAR.

– In order to gain access to a previously

stored setting, follow steps 1-2, select

AST MODE in step 3 and press ENTER.

Storing stations automatically –

AUTOSTORE

This function automatically finds and stores

up to ten strong AM or FM stations in a

separate memory. If more than ten stations

are found, the ten strongest are stored. This

function is especially beneficial in areas in

which you are not acquainted with radio

stations or their frequencies.

– Choose radio mode using the

SELECTOR knob or the AM/FM button.

– Select AUTOSTORE in the menu and

press ENTER.

– Select AST SEARCH and press ENTER.

– AUTOSTORING is shown in the display

and a number of strong stations (max. 10)

NVT

Infotainment system

Radio functions

correct frequency irrespective of the trans-

mitter to which the car occupants are

listening or the active audio source (e.g. CD).

The system can also be used for receiving

traffic information and for finding broadcasts

of a specific type. Radiotext, which is also a

part of RDS, is used by radio stations to send

information regarding broadcasts already in

progress.

If you press EXIT (1), the radio begins to play

the selected transmitter, but without updated

RDS information.

1

News – NEWS

This function interrupts other sound sources,

e.g. CD, when a news broadcast starts.

– Choose radio mode using the

SELECTOR knob or the AM/FM button.

– Select NEWS in the menu and press

ENTER.

– NEWS is shown in the display.

– Select NEWS again and press ENTER to

deactivate the NEWS function.

NOTE! Some radio stations do not use RDS

or only use a limited range of its features.

Automatic search for program

information – PI Seek

With this function, programmes from RDS

stations that are news-coded will interrupt

other audio sources using the volume setting

for this specific purpose. As soon as the

news broadcast is finished, the audio system

returns to the previous audio source and

resumes the previous volume setting.

When listening to an RDS transmitter,

various information, such as traffic infor-

mation, is stored in the radio.

Scanning – SCAN

The scan function automatically searches for

AM or FM station signals. When the radio

finds a station, scanning stops for

When a preselected RDS transmitter is later

selected, the radio updates the transmitter’s

RDS information. If the radio is in the

boundary area or just outside of the trans-

mitter’s range, the radio automatically

searches for the strongest possible trans-

mitter of this station.

approx. 8 seconds and then resumes.

– Choose radio mode using the

SELECTOR knob or the AM/FM button.

– Select SCAN in the menu and press

ENTER.

– SCAN is shown in the display.

– Press the EXIT/CLEAR button to exit.

– If you do not wish to listen to a news item

in progress, press the EXIT button. The

NEWS function remains active and the

radio waits for the next news programme.

If there is no transmitter within "listening

distance", the radio becomes silent and

"PI SEEK PRESS EXIT TO CANCEL" is

shown in the display until a station is found.

Radio Data System – RDS

RDS is a system which links specific network

transmitters together and is used, for

example, to assist motorists by setting the

NVU

Infotainment system

information will only interrupt the sound

source if TP))) is shown in the display.

– If you do not wish to listen to a traffic

bulletin, press the EXIT button. The TP

function, however, remains active and the

radio waits for the next traffic bulletin.

TP Search

This function allows you to listen to traffic

information when travelling between different

countries and states in Europe without

needing to select a station.

– Select RADIO SETTINGS in the menu

and press ENTER.

– Select TP and press ENTER.

– Select TP Search and press ENTER.

– To deactivate the function, select TP

Search again and press ENTER.

Traffic information – TP

Radio text

This function interrupts other audio sources

in order to broadcast traffic information from

RDS stations; the message is heard at the

volume set for this specific purpose. As soon

as the message ends, the audio system

returns to the previous audio source and

resumes the previous volume setting.

Some RDS stations send information on

programme content, artists, etc. This infor-

mation can be indicated with text in the

display.

– Press the MENU button.

– Select Radio text on the menu and press

ENTER.

– Select TP in the menu and press ENTER.

– TP is shown in the display.

– Select RADIOTEXT again and press

ENTER to deactivate.

– Select TP again and press ENTER to

deactivate the TP function.

TP is shown in the display when this function

is active. If the set station can send traffic

information, ))) is shown in the display. Traffic

NVV

Infotainment system

Radio functions

Alarm

Alarms are transmitted automatically and the

function cannot be deactivated.

NOTE! Not all radio stations have a PTY

designation.

Shown on the

Programme type

"Alarm!" is shown in the radio display when

an alarm message is sent. This function is

used to warm motorists of major accidents

and catastrophes, such as a bridge collapse

or an accident at a nuclear plant.

display

Current affairs

CURRENT

AFFAIRS

Information

Sport

INFORMATION

SPORT

Education

Drama

EDUCATION

DRAMA

Culture and Art

Science

CULTURES

SCIENCE

Varied discussions

Pop music

Rock music

Easy listening

Light classic

Serious classic

VARIED SPEECH

POP MUSIC

ROCK MUSIC

EASY LISTENING

LIGHT CLASSIC

SERIOUS

Programme type – PTY

The PTY function allows you to select

programmes that fit your taste. Use the PTY

function to select from among the different

programme types shown in the list.

Show PTY

CLASSIC

Which PTY does the set station have?

– Select RADIO SETTINGS in the menu

and press ENTER.

– Select PTY in the menu and press

ENTER.

– Select SHOW PTY and press ENTER.

The PTY of the selected station is now

shown in the display.

Other music

Weather & Metro

Finance

Children’s progs

Social affairs

Religion

OTHER MUSIC

WEATHER

FINANCE

CHILDREN

SOCIAL AFFAIRS

RELIGION

Phone In

Travel and holiday

PHONE IN

TRAVEL

OMM

Infotainment system

– Once you have selected all desired types,

select EXIT/CLEAR to exit the PTY list.

– Select SEARCH PTY and press ENTER.

If the radio finds a station with the

selected programme type, it is played

through the speakers.

Shown on the

display

Programme type

Leisure and hobby

LEISURE &

HOBBY

JAZZ MUSIC

COUNTRY MUSIC

NATIONAL

Jazz music

Country music

National music

– If the radio finds a station that is

unsuitable, continue the search with the

MUSIC

and

buttons.

Oldies music

Folk music

Documentary

OLDIES MUSIC

FOLK MUSIC

DOCUMENTARY

– If no stations with the selected

programme type are found, the radio

resumes its previous frequency. PTY then

remains in standby mode until the

selected programme type is aired, at

which time the radio automatically

switches to the station sending the

selected programme type.

Search for a specific programme

type – PTY

This function helps you find programmes with

a specific focus by searching the entire

frequency band.

– In order to deactivate PTY standby, enter

the menu and select CLEAR ALL PTY.

The symbol disappears from the display

and the radio resumes normal mode.

– Select FM1 or FM2 and press the MENU

button.

PTY standby

– Select RADIO SETTINGS and press

ENTER.

To continue with the radio in PTY standby,

repeat steps 1-6.

– Select PTY and press ENTER.

– Choose SELECT PTY and press ENTER.

– Press ENTER for one or more of the listed

programme types you desire. The PTY

symbol in the display lights up when the

first selection is made and the radio

continues in standby for PTY.

OMN

Infotainment system

Radio functions

– Select AF and press ENTER.

– To deactivate AF, select AF and press

ENTER.

News – NEWS STATION

Here, you set from which station news is to

be heeded.

Regional radio programme –

REG

The REG function is usually deactivated. It

makes it possible to stay tuned to a regional

transmitter even if signals are weak.

Note that the set station in question must be

an RDS station for this to work.

– Listen to the station from which news is to

be heeded.

– Select RADIO SETTINGS in the menu

and press ENTER.

– Select NEWS STATION and press

ENTER.

– Select SET CURRENT and press ENTER.

NOTE! Now only news from the stored

station will by played.

– Select RADIO SETTINGS in the menu

and press ENTER.

– Select Regional and press ENTER.

– REG is shown on the display.

– To deactivate REG, select REG again and

press ENTER.

Traffic information – TP STATION

Here, you set from which station traffic infor-

mation is to be heeded.

Deactivate TP STATION/NEWS

STATION

– Select RADIO SETTINGS in the menu

and press ENTER.

– Select TP/NEWS STATION and press

ENTER.

– Select RESET STATION and press

ENTER.

Note that ))) must be shown in the display for

this to work.

– Listen to the station from which traffic

information is to be heeded.

– Select RADIO SETTINGS in the menu

and press ENTER.

– Select TP and press ENTER.

– Select TP Station and press ENTER.

– Select SET CURRENT and press

ENTER.

NOTE! Now only traffic information from the

stored station will by played.

Automatic frequency updating –

AF

The AF function is usually active and makes

sure that the strongest available transmitter

for a radio station is used.

– Select RADIO SETTINGS in the menu

and press ENTER.

OMO

Infotainment system

– Select LOCAL, DISTANT or OFF and

press ENTER.

Resetting RDS functions –

RESET ALL

This function restores all radio settings to the

original factory settings.

– Select RADIO SETTINGS in the menu

and press ENTER.

– Select RESET ALL in the menu and press

ENTER.

– Press ENTER again to confirm your

selection.

EON – LOCAL/DISTANT

(Enhanced Other Networks)

Normally, the EON function is in DISTANT

mode and determines if it is necessary to

interrupt the radio station you are listening to

for traffic bulletins, news broadcasts or the

like from other channels (if these functions

are selected). The function has two levels:

LOCAL only interrupts if the signal is strong.

DISTANT will even interrupt with weaker

signals. No interruptions occur if OFF is

selected.

– Select RADIO SETTINGS in the menu

and press ENTER.

– Select EON and press ENTER.

OMP

Infotainment system

CD/MD (option)

1

2

3

4

3

1

2

Fast forward/reverse

Press and hold down

or

to search

within a track or the whole disc. The search

continues as long as the button is depressed.

If you have a keypad in the steering wheel,

you can also use the corresponding buttons.

Random – RANDOM

This function chooses a CD track in no

particular order (shuffle).

– Select RANDOM in the menu and press

ENTER.

– RND is shown on the display as long as

the function is activated.

– Select RANDOM OFF or press the EXIT

button to exit.

NOTE! Do not use CDs with that have disc

labels. The heat from the CD player could

cause the label to come loose from the disc.

The CD player could then be damaged.

Starting the CD/MD player

Scan

– Start the CD player with the SELECTOR

knob (3) or by pressing the CD

button (1). Insert a disc in the CD

player (4).

– Start the MD player with the SELECTOR

knob (3). Insert a disc in the MD

player (2).

This function plays the first ten seconds of

each song or track.

– Select SCAN in the menu and press

ENTER.

– Press EXIT/CLEAR when you find a song

or track you wish to listen to.

Use only 12 cm CDs, no

smaller! If the quality of the

CD does not comply with

the requirements of

standard EN60908 or if it

Disc text (MD only)

Changing tracks

Certain discs contain information on album

and song titles. This information is shown in

the display in text form if the function

DISCTEXT is activated.

Press

to skip to the next track or

to

skip to the previous track. The track number

is shown in the display. If you have a keypad

in the steering wheel, you can also use the

corresponding buttons.

has been recorded using

poor equipment, sound quality may be poor

or playback interrupted.

– Select DISCTEXT in the menu and press

ENTER.

OMQ

Infotainment system

– If information is stored on the disc, it is

shown in the display.

– To deactivate the function, select

DISCTEXT and press ENTER.

MD eject

If you press the button (1), the MD player

stops and ejects the disc.

CD eject

If you press the button (2), the CD player

stops and ejects the disc.

For reasons of traffic safety, the ejected CD

remains out no more than 12 seconds. The

CD player then pulls it back in. To reactivate

the CD player, press the CD button (3).

OMR

Infotainment system

CD changer (option)

– RND or RND ALL is shown on the display

while the function is active.

– Press EXIT to exit.

1

3

2

Changing tracks

Press

to skip to the next track or

to

skip to the previous track. The track number

is shown in the display. If you have a keypad

in the steering wheel, you can also use the

corresponding buttons.

Press

to select the next random track.

NOTE! You can only select the next random

track on the disc in question.

Fast forward/reverse

Disctext

Certain discs contain information on album

and song titles. This information is shown in

the display in text form if the function

DISCTEXT is activated.

Press and hold down

or

to search

within a track or the whole disc. The search

continues as long as the button is depressed.

If you have a keypad in the steering wheel,

you can also use the corresponding buttons.

– Press the MENU button.

– Select DISCTEXT in the menu and press

ENTER.

– If information is stored on the disc, it is

shown in the display instead of the

current track.

Scan

Starting the CD changer

The CD changer can hold up to six discs.

This function plays the first ten seconds of

each song or track.

– Choose CD mode using the SELECTOR

knob (2) or the CD button (1).

– Press the MENU button.

– Select SCAN and press ENTER.

– Press EXIT/CLEAR when you find a song

or track you wish to listen to.

– To deactivate the function, select

DISCTEXT and press ENTER.

– Select an empty position using the

numbered buttons 1-6 (3). The display

shows which are empty.

– Insert a disc into the changer.

Make sure INSERT DISC is shown before

you insert a new disc.

Eject All

Scan only works on the selected disc.

A long press on the EJECT button (1) starts

EJECT ALL. This empties the entire magazine

disc by disc. The text EJECTING ALL is

shown in the display.

Random – RANDOM

This function chooses a CD track in no

particular order.

Selecting discs

– Select RANDOM in the menu and press

ENTER.

– Select SINGLE DISC or ALL DISCS for

the player to randomly choose from one

or all discs in the CD changer.

The function can only be activated when the

car is stationary and is interrupted if the car

begins to move.

Select which disc is to be played using

numbered buttons 1-6 (3). The number of the

disc and track are shown in the display.

OMS

Infotainment system

For reasons of traffic safety, the ejected disc

remains out for 12 seconds. If it is not taken

care of, the function is interrupted.

1

NOTE! Do not use CDs with that have disc

labels. The heat from the CD player could

cause the label to come loose from the disc.

The CD player could then be damaged.

Use only 12 cm CDs, no smaller. If the quality

of the CD does not comply with the require-

ments of standard EN60908 or if it has been

recorded using poor equipment, sound

quality may be poor or playback interrupted.

CD eject

If you press the button (1) the CD player

stops and ejects the disc.

For reasons of traffic safety, you have

12 seconds to handle the ejected disc or it

will be re-fed into the CD player.

OMT

Infotainment system

Menu settings and options – Audio

6.6.2.

6.6.3.

LOCAL

5.2.

Dolby CD/MD

Main menu/submenus

RADIO

2

DISTANT

5.2.1. Pro Logic II

5.2.2.

5.2.3.

6.7.

RESET All

3 Channel

Off

7. AUDIO SETTINGS (certain models)

1

1. AUTOSTORE

1

2

7.1.

Dolby AM/FM

7.1.1. Pro Logic II

3CH

5.3.

5.4.

5.5.

5.6.

SUBWOOFER ON /OFF (option)

EQUALIZER Fr (option)

EQUALIZER Rr (option)

RESET ALL

1.1.

1.2.

AST Mode

AST Search

1.2.1. AUTOSTORING

7.1.2.

7.1.3.

2

OFF

1

2

2. SCAN ON/OFF

7.2.

Dolby CD/MD

CDX

1

2

3. NEWS ON/ OFF

2

7.2.1. Pro Logic II

7.2.2.

7.2.3.

1

2

4. TP ON/OFF

3

3CH

OFF

1. RANDOM

1

2

5. RADIOTEXT ON/OFF

6. RADIO SETTINGS

4

1.1.

1.2.

1.3.

Off

1

2

7.3.

7.4.

7.5.

7.6.

SUBWOOFER ON /OFF (option)

EQUALIZER Fr (certain models)

EQUALIZER RR (certain models)

RESET ALL

Single Disc

All Discs

3

6.1. PTY

6.1.1.

SELECT PTY

SEARCH PTY

2. SCAN

1

6.1.2.

3

2

3. NEWS ON/OFF

2

6.1.3.

SHOW PTY ON/OFF

CD

3

2

4. TP ON/OFF

6.2.

TP

3

2

6.2.1.

TP STATION SET

1

5. DISCTEXT ON/OFF

6. AUDIO SETTINGS

1. RANDOM

CURRENT/RESET STN

1

2. SCAN

2

6.1. Dolby AM/FM

6.1.1. Pro Logic II

6.2.2.

TP SEARCH ON/OFF

1

2

3. NEWS ON/OFF

6.3.

6.4.

NEWS STATION

1

2

4. TP ON/OFF

5. AUDIO SETTINGS

5.1. Dolby AM/FM

5.1.1. Pro Logic II

6.1.2.

3 Channel

6.3.1.

SET CURRENT/RESET STN

2

1

2

6.1.3.

Off

AF ON /OFF

6.2.

Dolby CD/MD

6.2.1. Pro Logic II

6.2.2. 3 Channel

1

2

6.5.

6.6.

REGIONAL ON/OFF

2

EON

5.1.2.

3 Channel

6.6.1.

OFF

2

5.1.3.

Off

1.

2.

Programmable with MY KEY

Default

3.

4.

Programmable with MY KEY

Default

OMU

Infotainment system

3

2

6.2.3.

6.2.4.

Off SUBWOOFER ON /

OFF (option)

1

EQUALIZER Fr (certain

models)

6.3.

6.4.

EQUALIZER Rr (certain models)

Reset All

MD

1

1. RANDOM

1

2. SCAN

1

3. NEWS

1

4. TP

1

2

5. DISC TEXT ON/OFF

6. AUDIO SETTINGS

My own shortcut button –

MY KEY

The MY KEY button (1) can be used to store

your favourite menu functions, such as

SCAN, AUTOSTORE or TP.

1

6.1.

SURROUND

6.1.1.

6.1.2.

Pro Logic II

3 Channel

2

6.1.3.

Off

1

2

6.2.

6.3.

6.4.

6.5.

SUBWOOFER ON /OFF (option)

EQUALIZER FR (certain models)

EQUALIZER RR (certain models)

Reset All

– Use the menu selection buttons to scroll

among the functions.

– Select the function to be stored by

holding the MY KEY button depressed for

more than two seconds.

– When MY KEY STORED is shown in the

display, the function has been stored.

– Activate the function by briefly pressing

the MY KEY button.

– Repeat steps 1-4 to store a new function

for the button.

OMV

Infotainment system

Telephone (option)

ONM

Infotainment system

Telephone system components

1. Steering wheel keypad

General rules

•

Put traffic safety first! If as the driver you

need to use the privacy handset, park the

car in a safe place first.

You can control the majority of telephone

functions using the steering wheel keypad.

•

Switch off the system when refuelling the

car.

When the telephone is active, the steering

wheel keypad can only be used for telephone

functions. When in active mode, telephone

information is always shown in the control

panel display.

•

Switch off the system near blasting work.

Let only authorised personnel service

your telephone system.

Emergency calls

2. Microphone

Emergency calls to alarm centres can be

made without a SIM card as long as there is

coverage by a GSM operator.

The handsfree microphone is integrated in

the ceiling panel.

3. Control panel

– Activate the telephone.

All telephone system functions, except call

volume, can be controlled from the control

panel keypad. The display shows menu

functions, messages, telephone numbers,

etc.

– Ring the emergency number that applies

to your region (within EU: 112).

– Press the ENTER button on the control

panel or steering wheel.

Loudspeaker

4. SIM card

The telephone uses the speaker in the

driver’s door or the centre speaker of the

audio system (if there is one).

The SIM card is inserted into the front of the

control panel.

5. Privacy handset

The privacy handset can be used when you

do not wish to be disturbed.

6. Antenna

The antenna is mounted against the

windscreen in front of the rearview mirror.

ONN

Infotainment system

Telephone functions

1

2

3

4

5

2

6

4

9

7

8

6

1. Display

5. SIM card holder

2. ENTER – accept a call, make a menu

6. Menu selection buttons

7. Number/character buttons and menu

shortcuts

selection or activate the telephone from

standby mode

3. On/Off/Standby

8. Seek – scroll forward or back when

entering text and numbers

9. Increase/decrease call volume during a

call

4. EXIT/CLEAR – terminate/refuse a call,

scroll back in the menu, cancel a

selection or erase entered digits/

characters

ONO

Infotainment system

When the telephone is active or in standby

mode, a handset is shown in the display.

1

NOTE! With the Performance audio system

(standard level), it is not possible to listen to

the radio, CD, MD or receive traffic messages

during a telephone call.

If you switch off the car’s ignition with the

telephone system on, it will be on the next

time you switch on the ignition. No calls can

be received when the telephone system is

switched off.

Volume reduction during

telephone call

If the telephone rings when the radio is

switched on, the volume is lowered when the

call is answered. When the call is concluded,

the volume returns to the previously set level.

Radio volume can also be adjusted during a

telephone call, whereby the newly selected

level will resume when the call is concluded.

Audio system volume can be switched off

completely during a telephone call. See

menu 5.5.3, see page 213.

Switch, On/Off/Standby –

Telephone

To activate the system:

Standby mode

In standby mode, you can receive calls while

the audio system is active and information

from audio system sources is shown in the

display.

– Press the PHONE button (1) to activate

the telephone system.

To switch off the system:

To use other functions of the telephone

system, the phone must be in active mode.

– Hold the PHONE button depressed to

switch off the telephone system

Continuing with system in standby mode:

Menu shortcuts

Once you have used the menu button to

enter the menu system, you can use numbers

instead of the arrows and the ENTER button

to select the right menu in the main menu

level. Each menu selection is numbered. The

numbers are shown in the display together

with the menu alternative.

This function only applies to the Volvo

integrated telephone system.

– The telephone will continue in standby

mode with a brief press of the PHONE

button or if you press EXIT/CLEAR.

– Reactivate the system with the PHONE

button.

ONP

Infotainment system

Telephone functions

Traffic safety

For reasons of safety, parts of the telephone

menu system cannot be accessed at speeds

in excess of 8 km/h. You may only complete

menu system activities that have already

been started.

Making and receiving calls

To call:

– Dial the number and press ENTER on the

steering wheel or the control panel

keypad or lift the handset.

To receive an incoming call:

The speed limiter can be disconnected using

menu function 5.6.

– Press ENTER (or lift the handset). You

can also use Automatic Answer. See

menu function 4.3.

The car’s audio system can be muted

automatically while a telephone conversation

is in progress. See menu option 5.6.3.

Ending a call

Press EXIT/CLEAR on the steering wheel or

control panel keypad or hang up the handset.

The audio system resumes its previous

activity.

SIM card

The telephone can only be used with a valid

SIM card (Subscriber Identity Module). Your

network operator supplies this card.

Refuse an incoming call by pressing

EXIT/CLEAR.

Always insert the SIM card when you wish to

use the telephone.

– Switch off the telephone.

– Open the SIM card holder with a short

press.

– Insert the card with the metallic surface

down.

– Make sure that the bevelled corner of the

SIM card matches the bevel of the holder.

– Press in the holder.

Contact your network operator if you

experience difficulties with the SIM card.

ONQ

Infotainment system

its cradle. If the handset is already

removed from its cradle, the ringing party

will be audible in the handsfree system.

Press the MENU button, scroll to

Handset and press ENTER in order to

transfer to the handset.

Using speed dial

To make a call, press and hold the desired

speed dial button for two seconds or press

the button briefly and then press ENTER.

A

NOTE! Once you switch on the telephone,

wait a moment before using speed dial. If you

wish to use a speed dial number, Menu 3.3.1

must be activated.

Last number called

The telephone automatically stores the last

telephone numbers/names called.

Call waiting

– Press ENTER in the steering wheel or

control panel keypad.

– Use the menu buttons to scroll forward or

back through the last numbers dialled.

They are shown in the display.

– Press ENTER.

If you hear two beeps in your speaker during

a phone call, someone else is calling. This

function can be selected or deselected in the

menu.

In this mode, you can choose to either take

the call or refuse it. If you do not wish to take

the call, press EXIT/CLEAR or do nothing.

Privacy handset

If you wish to speak without disruptions, use

the privacy handset. Lift the handset and

press (A).

Speed dial

If you do wish to take the call, press ENTER.

Your current call will be put in "park mode". If

you press EXIT/CLEAR, both calls will be

terminated.

Storing speed dial numbers

A number stored in the phone book can be

linked to a speed dial button (1-9) as follows:

– Select the desired telephone number

using the centre console keypad and lift

the handset to place the call. Adjust the

volume with the dial on the side of the

handset.

– The call is ended when you replace the

handset in its holder.

– If you wish to switch to a handsfree unit

– Select Phone book on the menu and

press ENTER.

– Scroll to Speed dial, Menu 3.3, and press

ENTER.

– Select which number is to be the speed

dial number. Press ENTER to confirm.

– Search for the desired name or phone

number in the phone book. Press ENTER

to select.

without ending the call: press

on the

steering wheel keypad (or control panel

menu buttons) and select Handsfree.

Press ENTER and replace the handset in

ONR

Infotainment system

Telephone functions

Functions during a call

The following functions are available during a

call (scroll with the arrows and press ENTER

to make a selection):

Secret mode/

Secret mode

off

Handset/

Handsfree

Phone book

Three-way

calling

Secret mode

Use the handset or

handsfree

Secret mode/

Secret mode

off

Secret mode

Show phone book

Speak with both

parties simultaneously

(conference call)

Switch between the

two calls

1

Hold/Resume

Choose if the call is to

be parked or resumed.

Use the handset or

handsfree

Switch

Handset/

Handsfree

Phone book

Show phone book

The following functions are available when

you have a current call and a parked call

(scroll with the arrows and press ENTER to

make a selection):

Call volume

Increase or decrease call volume by pressing

the + or – button (1) of the steering wheel

keypad during a call.

When the telephone is activated, the steering

wheel keypad only controls the telephone

functions.

The telephone must be in standby mode in

order to adjust the audio system with these

buttons, see page 213.

ONS

Infotainment system

Phone book

j k l 5

Telephone numbers and names can be

stored in either the telephone memory or the

SIM card memory.

m n o 6 ñ ö ò ó Ø

p q r s 7 ß

t u v 8 ü ù ú û

w x y z 9

If the number of the person calling is found in

the phone book, his or her name is shown in

the display.

The telephone memory can store up to 255

names.

if you enter two letters in a row

from the same button, press *

between them or wait a few

seconds

Storing telephone numbers with

names

– Press the MENU button, select Phone

1

+ 0 @ * # & $ £ / %

book and press ENTER.

switch between upper and

lower case

delete the last letter or number

entered. If you press for a long

time, the enter number or text is

deleted.

– Scroll to Enter item and press ENTER.

– Enter a name and press ENTER.

– Enter a number and press ENTER.

– Choose in which memory to save and

press ENTER.

Calling from the memory

– Press the MENU button’s down arrow (1)

or in the steering wheel to search in

the phone book.

– Choose from the following alternatives:

•

Press ENTER and scroll with the arrows

until you find the desired name.

Press the key for the first letter of the

name (or enter the entire name) and press

ENTER.

Enter a name (or message)

Quitting text input:

– Clear all entered characters with a long

press on the EXIT/CLEAR button.

– Return to the menu with an additional

long press on the EXIT/CLEAR button.

Press the button with the desired character:

once for the first character, twice for the

second, etc. Press 1 to enter a space.

•

space 1- ? ! , . : " ' ( )

a b c 2 ä å à á â æ ç

d e f 3 è é ë ê

– Press ENTER to call the selected number.

g h i 4 ì í î ï

ONT

Infotainment system

Telephone functions

Specifications

Output

2 W

SIM card

small, 3V

1

Memory entries

255

SMS

Yes

(Short Message

Service)

Data/Fax

Dualband

No

Yes (900/

1800)

1. The telephone memory contains 255

positions. The number of SIM card

memory positions varies depending on

your subscription.

Double SIM cards

IMEI number

Many network operators offer double SIM

cards - one for your car and one for another

telephone. A double SIM card allows you to

have the same number for two different

telephones. Ask your network operator about

the offers available and the use of double SIM

cards.

In order to block the telephone, you must

provide your network operator with the

telephone’s IMEI number which is a 15-digit

serial number that is programmed in the

phone. To display this number, press *#06#.

Make a note of this number and keep it in a

safe place.

ONU

Infotainment system

Menu settings and options – Telephone

3.4.2.

Select number

5.2.10. Portuguës BR

3.5.

3.6.

3.7.

Empty SIM

Empty telephone

Memory status

5.2.11. Portuguës P

5.2.12. Suomi

5.2.13. Svenska

SIM security

1. Call log - CALL

1.1.

1.2.

1.3.

1.4.

Missed calls

Received calls

Outgoing calls

Erase list

4. Call options.

5.3.

4.1.

4.2.

4.3.

4.4.

4.5.

Transmit number

5.3.1.

5.3.2.

5.3.3.

On

Off

Automatic

Call waiting

Automatic answer

Call back

1.4.1.

All calls

1.4.2.

1.4.3.

1.4.4.

Missed calls

Received calls

Outgoing calls

5.4.

Change codes

Call divert

5.4.1.

PIN code

4.5.1.

All calls

When busy

When not answered

If unreachable

Fax calls

5.4.2.

Telephone code

1.5.

Call duration

4.5.2.

4.5.3.

4.5.4.

4.5.5.

4.5.6.

4.5.7.

5.5.

Volume

1.5.1.

1.5.2.

1.5.3.

1.5.4.

Last call

Number of calls

Total time

5.5.1.

5.5.2.

5.5.3.

5.5.4.

Ringer volume

Ringer tone

Mute radio

Reset time

Data calls

Cancel all diverts

Message beep

2. Messages

5.6.

5.7.

Traffic safety

Factory settings

2.1.

2.2.

2.3.

Read

New

Message settings

5. Tel. settings

5.1.

5.1.1.

5.1.2.

5.2.

Network selection

Automatic

Manual

Language

2.3.1.

2.3.2.

2.3.3.

SMSC number

Validity period

Message type

5.2.1.

5.2.2.

5.2.3.

5.2.4.

5.2.5.

5.2.6.

5.2.7.

5.2.8.

5.2.9.

Dansk

Deutsch

3. Phone book

3.1.

3.2.

3.3.

Enter item

Search

Copy all

English UK

English US

Español

Français CAN

Français FR

Italiano

3.3.1.

3.3.2.

SIM to telephone

Telephone to SIM

3.4.

Speed dial

3.4.1.

Active

Nederlands

ONV

Infotainment system

Menu settings and options – Telephone

Resetting the call timer requires the

3.2. Search

telephone code (see Menu 5.5).

3.3. Copy all

1. Call log

Copy telephone numbers and names from

the SIM card to the telephone memory.

1.1. Missed calls

2. Messages

A list of missed calls is shown here. You can

choose to call, erase or store the number in

the phone book.

2.1. Read

3.3.1.

3.3.2.

From SIM to telephone memory

From telephone to SIM memory

Here you can read received text messages.

You can then choose to erase the message,

forward it, change or save the entire message

or parts of it.

3.4. Speed dial

A number stored in the telephone book can

be stored as a speed dial number.

1.2. Received calls

A list of received calls is shown here. You can

choose to call, erase or store the number in

the phone book.

2.2. New

3.5. Empty SIM

The entire memory of the SIM card can be

erased.

You can write a text message using the

keypad. Then choose to save or send it.

1.3. Outgoing calls

A list of dialled numbers is shown here. You

can choose to call, erase or store the number

in the phone book.

2.3. Message settings

3.6. Empty telephone

The entire memory of the phone can be

erased.

Enter the number (SMSC number) of the

message centre to which you want your

messages transferred as well as how long

they are to be saved at the message centre.

1.4. Erase list

This option can be used to erase the list of

menus 1.1, 1.2 and 1.3 as follows.

3.7. Memory status

See how many places in the SIM card or

telephone memory are occupied by names

and numbers.

2.3.1.

2.3.2.

2.3.3.

SMSC number

Validity period

Message type

1.4.1.

1.4.2.

1.4.3.

1.4.4.

All

Missed

Received

Outgoing

Contact your service provider for information

on these settings and for an SMSC number.

Normally, these settings should not be

altered.

1.5. Call duration

Here you can see the duration of all your calls

or the most recent. You can also see the

number of calls and clear the call timer.

3. Phone book

1.5.1.

1.5.2.

1.5.3.

1.5.4.

Last call

Number of calls

Total time

3.1. Enter item

You can store names and telephone numbers

in the phone book. See the section on phone

book functions for more information.

Reset time.

OOM

Infotainment system

4. Call options

5. Telephone settings

5.4. Change codes

Change the PIN code or telephone code.

4.1. Transmit number

5.1. Network selection

Choose whether or not your own number

should be displayed to the person you call.

Contact your network operator regarding ex-

directory numbers.

Choose a network automatically or manually.

The selected operator is shown in the display

in the telephone’s basic mode.

5.4.1.

5.4.2.

PIN code

Telephone code (use 1234 until

you change to your own code). The

telephone code is used to reset the

call timer.

5.1.1.

5.1.2.

Auto

Manual

4.2. Call waiting

NOTE! Make a note of your code as save it in

a safe place.

Choose whether or not you want to be

alerted during a phone call that there is

another call coming in.

5.2. Language

Here you can choose which language the

telephone is to display.

5.5. Volume

5.5.1.

Ringer volume: Here you can

choose the volume of the ringer for

incoming calls.

Ringer tone: There are eight

different ringer tones to choose

from.

4.3. Automatic answer

Choose to automatically accept incoming

calls.

5.2.1.

5.2.2.

5.2.3.

5.2.4.

5.2.5.

5.2.6.

5.2.7.

5.2.8.

5.2.9.

Dansk

Deutsch

English UK

English US

Español

Français CAN

Français FR

Italiano

5.5.2.

4.4. Call back

Choose to call a previously dialled number

that was busy.

5.5.3.

5.5.4.

Mute radio: On/Off

4.5. Call divert service

Choose when and what type of calls are to be

diverted to a specified telephone number.

Speed volume: Choose whether

the volume should be adjusted

according to speed.

Nederlands

5.2.10. Português BR

5.2.11. Português P

5.2.12. Suomi

5.2.13. Svenska

5.3. SIM security

Select if the PIN code should be on, off or if

the telephone should automatically give the

PIN code.

4.5.1.

All calls (this setting only applies

during the call in progress).

When busy

When not answered

If unreachable

Fax calls

Data calls

Cancel all diverts

5.5.5.

Message beep

5.6. Traffic safety

4.5.2.

4.5.3.

4.5.4.

4.5.5.

4.5.6.

4.5.7.

Here you can choose to disengage the speed

limiter, i.e. have access to the entire menu

system even while driving.

5.7. Factory settings

Function to return to the system’s factory

settings.

5.3.1.

5.3.2.

5.3.3.

On

Off

Automatic

OON

Infotainment system

OOO

Infotainment system for Your Volvo XC90 SUV First Generation (2002-2014)

Related Topics

Popular Owner Manuals

Latest Owner Manuals