2017-2024 Volkswagen Arteon 4 Door Visibility -> Window wipers User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Visibility -> Window wipers for Your Volkswagen Arteon 4 Door First Generation (2017-2024)

Visibility  
Window wipers  
Operating the windshield wiper lever  
Fig. 84 On the right side of the steering column: operating the windshield wipers.  
The windshield wipers only work when the ignition is switched on and the hood is closed. Move the wiper lever into the desired position  
Wipers are switched off.  
:
Interval wiping for the windshield or rain sensor mode. Interval wiping for the windshield depends on the driving speed. The higher the speed, the faster  
the wipers will move.  
Slow wiper speed.  
Fast wiping.  
One-tap wiping – brief wiping. Press and hold the lever down longer to wipe faster.  
Pull the lever to activate the automatic wiper/washer system to clean the windshield. While the wiper/washer system is active, the Climatronic system  
switches to recirculation mode for approximately 30 seconds to help prevent the washer fluid odor from entering the vehicle interior.  
Switch for interval levels (vehicles without rain/light sensor) or to adjust the sensitivity of the rain/light sensor.  
WARNING  
Without the sufficient freeze protection, washer fluid can freeze on the window glass and reduce visibility.  
Only use the washer system with sufficient freeze protection in winter temperatures.  
Never use the windshield washer system in winter temperatures if the windshield has not been warmed up, e.g. with the air conditioning system.  
Otherwise, the freeze protection mixture can freeze on the windshield and limit visibility.  
WARNING  
Worn or dirty wiper blades reduce visibility and increase the risk of accidents and serious injuries.  
Always replace wiper blades if they are damaged or worn and are no longer cleaning the window glass sufficiently Cleaning and changing wiper  
blades.  
NOTICE  
Incorrect handling of the windshield wipers can cause damage to the windshield, the wiper blades and the wiper motor.  
Before driving and before the ignition is switched on, check that the windshield wiper lever is in the basic position.  
Remove any snow and ice from the windshield wipers and the windshield.  
Always carefully loosen wiper blades that have frozen onto the windshield from the windshield.  
NOTICE  
Do not use the windshield wipers when the windshield is dry. The window glass can be damaged if wiper blades wipe a dry window.  
111  
Do not turn on the windshield wipers when the windshield is dry.  
The activated wiper speed temporarily changes to the next lower speed when the vehicle is stationary.  
When parking the vehicle in cold weather conditions, moving the windshield wipers to the service position may be helpful for loosening the wiper blades more  
easily from the windshield Putting the windshield wipers in the service position .  
Wiper function  
Heated washer nozzles  
The heat thaws frozen washer fluid nozzles. The heat output is automatically regulated when the ignition is switched on and is dependent on the outside  
temperature. Only the window washer nozzles are heated and not the washer fluid hoses.  
Rain/light sensor  
Fig. 85 On the right side of the steering column: windshield wiper lever.  
Switch for adjusting the sensitivity of the rain/light sensor.  
Rain/light sensor deactivated.  
Rain/light sensor activated, automatic wiping as necessary.  
When switched on, the rain/light sensor automatically shortens or lengthens the delay between wiping cycles depending on how hard it is raining.  
Activating and deactivating the rain/light sensor  
1. Press the lever into the desired position fig. 85.  
Automatic wiping can be activated and deactivated in the vehicle settings in the Infotainment system Vehicle settings menu.  
If automatic wiping is deactivated in the Infotainment system, the interval time will be set in fixed stages.  
Adjusting the sensitivity of the rain/light sensor  
The sensitivity of the rain/light sensor can be manually adjusted with the switch in the windshield wiper lever fig. 85 , ⇒  
Move the switch to the right – high sensitivity.  
.
Move the switch to the left – low sensitivity.  
WARNING  
The rain/light sensor cannot detect all precipitation sufficiently and activate the windshield wipers accordingly.  
If necessary, switch on the windshield wipers manually if water on the windshield is impairing visibility.  
Troubleshooting  
Washer fluid level too low  
The yellow indicator light turns on.  
1. Fill the washer fluid reservoir Washer fluid.  
Windshield wiper malfunction  
The yellow indicator light turns on.  
112  

Related Topics

Popular Owner Manuals