Data transmission -> USB port for Your Volkswagen Atlas SUV First Generation (2018-2023)

Introduction  
Some external devices can be connected to the Infotainment system using the wired and wireless connections in the vehicle, if available.  
The type and quantity of wired and wireless connections depend on the vehicle equipment and country. The connections may differ within a model line or in a mode  
with optional equipment.  
In wired connections, only use the original connecting cable that belongs to the device or the connecting cable that was placed in the vehicle at the factory, if  
available.  
If the plug on the connector cable cannot be inserted, check the position and the connections.  
NOTICE  
Only use a suitable and undamaged connector cable for wired connections.  
Hold the plug on the connector cable in the correct position and insert it into the intended socket while pressing lightly. Pressing strongly can damage the  
device connection and the plug on the connector cable.  
The connector cable must not be pinched or bent sharply.  
Using unsuitable or damaged connector cables can cause malfunctions and damage to the device.  
If a connected device is not recognized, disconnect all connected devices and then reconnect the device. Check the function of the connecting cable, if necessary.  
If malfunctions occur in a connected device, restart the device. This sometimes fixes the error.  
USB port  
Please read the introductory information and heed the Warnings and Notice   
Introduction.  
Using the USB port, you can transfer  
data and charge devices or only charge  
devices.  
USB-C port  
Fig. 155 USB-C connection in the vehicle (general example).  
The vehicle may contain the following USB-C ports:  
Symbol for a USB port for data transmission and charging.  
Possible USB port installation locations  
Symbol for a USB port for charging only.  
The number and installation locations of USB ports depend on the vehicle and vehicle equipment and are not available in all countries.  
In the center console.  
At the base of the interior rearview mirror.  
In the storage compartment in the center console.  
In the compartment underneath the center armrest.  
USB ports at the rear seats only come with a charging function.  
Available Data Transfer Functions  
The following USB data transfer functions are available depending on the vehicle equipment.  
223  
App-Connect App-Connect.  
Media playback Media mode.  
Update, e.g. of the navigation data Navigation data.  
Available Charging Power  
Voltages up to 20 V are provided via the USB port, which enables up to 45 W charging power.  
Depending on the vehicle equipment, the following charging profiles may be supported by the USB ports:  
Legacy charging (2.5 W).  
BC1.2 (7.5 W).  
USB-C charging (15 W).  
USB power delivery (up to 45 W).  
The actual charging power of the connected device depends on the following aspects:  
Supported charging profiles.  
Device charge level.  
Device temperature.  
Charging cable used.  
For double USB ports, the charging power can be split between both ports.  
Instructions and restrictions  
Only use suitable USB connection cables. The USB connection cable must match the USB port installed in the vehicle.  
Dirty, overheated or damaged data carriers are not to be used. Read and heed the information provided by the manufacturer.  
Difference in quality between data carriers from different manufacturers can cause problems with media playback.  
Using USB extension cables, USB adapters or USB hubs may result in malfunctions or failure of the USB functions.  
Bluetooth® interface  
Please read the introductory information and heed the Warnings and Notice ⇒  
Introduction.  
The Bluetooth interface is a wireless connection.  
In Bluetooth audio mode, audio files that are on a Bluetooth audio source that is connected via Bluetooth, such as a cell phone, can be played through the vehicle  
speakers.  
Bluetooth audio mode is only possible in vehicles equipped with a factory-installed mobile phone interface that supports this function.  
Bluetooth profiles  
The Infotainment system is equipped with a Bluetooth interface at the factory.  
A maximum of three Bluetooth devices can be connected at the same time.  
The following Bluetooth profiles may be available in the specified version or in another version:  
HFP 1.7.  
Telephony and handsfree mode.  
A2DP 1.3.  
Music playback.  
AVRCP 1.6.  
Display and operation for music playback.  
Transfer of cover art.  
PBAP 1.2.  
Access to phone book and call lists.  
MAP 1.4.  
Access to SMS and e-mail.  
SPP 1.2.  
Serial data transfer via Bluetooth.  
Requirements  
The Bluetooth audio source supports the A2DP Bluetooth profile.  
The  
Bluetooth audio (A2DP/AVRCP) function is activated in the Bluetooth settings menu.  
224