Sunshade for Your Volkswagen Atlas SUV First Generation (2018-2023)

1. Turn rotary knob to position  
.
2. Adjusts the left outside mirror. The right outside mirror will be adjusted the same way (synchronized).  
3. To correct the adjustment of the right outside mirror, if necessary, turn the knob to the  
position and adjust the right outside mirror.  
Folding the outside mirrors in while parking  
If the vehicle is locked or unlocked from the outside, the outside mirrors will automatically fold in or out. For this to happen, the knob must be in the  
position.  
,
,
or  
If the knob for power exterior mirrors is in the  
position, the outside mirrors will remain folded in.  
Save the passenger-side outside mirror settings when reversing  
1. Unlock the vehicle using the key, to which the setting is allocated.  
2. Set the electronic parking brake.  
3. Switch the ignition on.  
4. Shift the transmission to neutral.  
5. Select the reverse gear.  
6. Adjust the front passenger outside mirror so that, for example, the edge of the curb can be seen clearly.  
7. Shift the transmission to neutral.  
8. Switch the ignition off.  
The selected mirror position will be stored and assigned to the vehicle key.  
Opening the front passenger outside mirror settings for driving in reverse  
1. Turn rotary knob for the outside mirrors to the relevant position for adjusting the front passenger outside mirror.  
2. With the ignition switched on, select reverse gear.  
The front passenger outside mirror will adjust to the stored position.  
The front passenger outside mirror will exit the position stored for driving in reverse when you begin driving forward faster than about 15 km/h (about 9 mph) or whe  
the knob is turned to any other position.  
WARNING  
Inattentively folding the outside mirrors out and in can cause injuries.  
Do not fold the outside mirrors out or in if there are any obstacles in the path.  
Always make sure your fingers do not get pinched between the outside mirror and the mirror base when moving the mirror.  
NOTICE  
If outside mirrors are not folded in when driving through a car wash, they can get damaged.  
Always fold in the outside mirrors.  
Do not fold power outside mirrors in or out by hand because the mirror motor could be damaged.  
If there is a malfunction in the power outside mirror, you can adjust the position of the mirror manually by hand by pushing on the edge of the mirror surface.  
Sunshade  
Sun visors  
130  
Fig. 102 In the front of the headliner: sun visor.  
Light.  
Remove from holder.  
Slide cover open.  
Adjustment options for the sun visors  
Fold toward the windshield.  
Remove from the holder and tilt toward the door fig. 102.  
Adjustment options for the sun visor  
In some vehicle models, the sun visor can be moved farther toward the rear when it is tilted toward the door.  
Illuminated vanity mirror  
When the sun visor is folded down, there is a vanity mirror located behind a cover. The lights fig. 102 turn on when the cover fig. 102 slides open.  
The lighting for the vanity mirror switches off in the following situations:  
The cover is closed.  
The sun visor is swung upwards or fully forwards.  
The sun visor is pushed in a longitudinal direction or not fully pushed in.  
WARNING  
Visibility may be reduced when sun visors are folded down and the sunshades are extended.  
Always guide sun visors and sunshades back into their holders when they are no longer needed.  
Under certain conditions, the light above the sun visor will turn off automatically after several minutes. This reduces the risk of the 12 V vehicle battery being  
drained.  
Sunshade in the sunroof  
Fig. 103 In the headliner: buttons for controlling the sunshade.  
131  
Button for opening the sunshade.  
Button for closing the sunshade.  
The power sunshade only works when the ignition is switched on.  
When the sunroof is tilted all the way open, the sunshade automatically moves into a position that provides ventilation. The sunshade will remain in the ventilation  
position after the sunroof is closed.  
The fig. 103 and  
buttons have two detents. In the first detent, the sunshade can be opened or closed either completely or partially.  
In the second detent, pressing the button briefly opens or closes the sunshade completely. Pressing the button again stops the one-touch feature.  
Opening the sunshade  
1. Press the  
button to the first level.  
Automatic process: Press the  
button briefly to the second level.  
2. To interrupt the automatic opening process, press the button  
again briefly.  
Closing the sunshade  
1. Press the  
button to the first level.  
Automatic process: Press the  
button briefly to the second level.  
2. To interrupt the automatic closing process, press the button  
again briefly.  
The sunshade can still be opened or closed for several minutes after the ignition has been switched off, as long as the driver’s or front passenger door has not been  
opened.  
Sunshade pinch protection  
The pinch protection can reduce the risk of being pinched and injured when the sunshade is closing  
when closing, the sunroof or sunshade will open again immediately.  
. If the sunshade encounters resistance or an obstacle  
1. Check why the sunroof did not close.  
2. Try again to close the sunshade.  
If the sunshade still encounters resistance or an obstacle and will not close, open the sunshade again. Within a short time after opening, you can close the  
sunshade again without pinch protection.  
3. If the sunshade is still not able to close, close the sunshade without pinch protection.  
Closing the sunshade without pinch protection  
1. Within approximately five seconds after pinch protection is triggered, press and hold the fig. 103 button until the sunshade is completely closed.  
This will close the sunshade without pinch protection.  
2. If the sunshade still will not close, contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility for assistance. Volkswagen recommends  
contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
WARNING  
Closing the sunshade without pinch protection may result in serious injuries.  
Always be careful when closing the sunshade.  
Ensure that nobody is within the range of operation of the sunshade, especially if it is closing without pinch protection.  
The pinch protection does not prevent fingers or other parts of the body from becoming injured by being pressed against the roof frame.  
When the sunroof is open, the power sunshade can only be closed to the front edge of the sunroof.  
Sunshade for the rear side windows  
132  
Fig. 104 In the right window: Sunshade.  
The sunshades for the rear side windows are installed in the door trim panels on the windows.  
1. Pull the sunshade all the way upward by the handle in the direction of the arrow fig. 104.  
2. Secure the rod with both eyelets in its holder fig. 104.  
3. Check that the extended sunshade is securely hooked in the holder.  
To roll down, release the sunshade at the top and guide it downward by hand  
.
NOTICE  
To reduce the risk of damaging the sunshade or the interior trim panel, do not let the sunshade roll down “quickly”.  
133