Vehicles with analog instrument cluster:
1. Switch the ignition off.
2. Press and hold the
button in the instrument cluster.
3. Switch the ignition back on.
4. Release the
5. Press the
button when one of the following messages appears in the instrument cluster display: Reset oil change service? or Reset inspection service?.
button in the instrument cluster to confirm.
Vehicles with a digital instrument cluster: The service interval display can only be reset through the service menu ⇒ Service menu.
Do not reset the service interval display between service intervals or incorrect information will be displayed.
If the oil change service interval was manually reset, the service interval display then also switches to a fixed service interval, even on vehicles with the flexible oil
change service interval.
The service message automatically disappears after a few seconds when the engine is running or by pressing the
lever or the button on the multi-function steering wheel.
button on the windshield wiper
If the 12 V vehicle battery in a vehicle with the flexible service interval has been disconnected for an extended period, the time for the next oil change service
cannot be calculated. Therefore, the service interval displays may show incorrect calculations. If this is the case, follow the maximum permissible maintenance
intervals.
Time
Setting the time in the Infotainment system
1. Depending on the design, press the
button or function key and open the Vehicle menu.
button or function key.
Or: depending on the vehicle equipment, press the
2. Depending on how your vehicle is equipped, open the Settings menu.
3. Select the Time and date menu item to set the time.
Setting the Time in the Volkswagen Digital Cockpit Pro
1. Select the Range information profile.
2. Press and hold the
button on the multi-function steering wheel until the service menu is available in the instrument cluster display ⇒ Service menu.
3. Select Time menu.
4. Set the correct time using the
or
arrow buttons.
Setting the Time in the Volkswagen Digital Cockpit Basic
1. Open the service menu ⇒ Service menu.
2. Select the Time menu.
3. Set the correct time with the
button.
Setting the time in the analog instrument cluster
1. To set all clocks in the vehicle, press and hold the
button in the analog instrument cluster until Time appears in the instrument cluster display.
2. Release the
button.
The time is displayed and the hour display is marked.
3. Press the
button as many times as required until the preferred hours are displayed.
Press and hold the
button to move through the numbers faster.
After several seconds, the system automatically switches to minute display.
4. Press the button as many times as required until the desired minutes are displayed.
Press and hold the button to move through the numbers faster.
5. Release the button to finish setting the time.
Vehicle settings menu
You can switch individual functions and
systems on and off and adjust settings
in the vehicle settings menu in the
Infotainment system.
Opening the Vehicle settings Menu
1. Switch the ignition on.
2. If necessary, switch on the Infotainment system.
3. Depending on the equipment, press the
Or: depending on the design, press the
button or function key and select the Vehicle menu.
button or function key and select the Settings menu.
39
English 