Wheel change -> Wheel bolts for Your Volkswagen Atlas SUV First Generation (2018-2023)

Switch on the emergency flashers to warn other road users.  
Make sure the vehicle is on level and solid ground. If necessary, place a large, stable surface under the jack.  
Only carry out the wheel change yourself if you are familiar with the necessary steps. Instead, seek assistance from an authorized Volkswagen dealer or  
authorized Volkswagen Service Facility. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service  
Facility.  
Only use suitable and undamaged tools for wheel changes.  
Always switch off the engine and move the selector lever to the P position to reduce the risk of the vehicle moving unintentionally.  
Set the electronic parking brake.  
After changing a wheel, immediately check the tightening torque of the wheel bolts with an undamaged torque wrench that is functioning correctly.  
If your vehicle is equipped with a Tire Pressure Monitoring System, you must recalibrate the system immediately after a wheel is changed Tire  
Pressure Monitoring System.  
Preparations for changing a wheel  
Please read the introductory information and heed the Warnings and Notice   
Introduction.  
Checklist  
Always perform the following steps in the specified order to prepare for a wheel change  
:
1. If the vehicle has a flat tire, park the vehicle a safe distance away from moving traffic on level and solid ground as soon as possible.  
2. Set the electronic parking brake.  
3. Automatic transmission: move the selector lever into the P position.  
4. Stop the engine and switch the ignition off.  
5. Remove the vehicle key from the ignition lock.  
6. Have all vehicle occupants exit the vehicle on the side facing away from traffic and move to a safe area.  
7. Turn on the emergency flashers and set up the warning triangle Securing yourself and the vehicle. Follow any applicable laws.  
8. Block the tire that is diagonal from the one you will be changing with a stone, chocks, or another suitable object.  
9. In trailer mode: Disconnect the trailer from the towing vehicle and park it Trailer towing.  
10. If the luggage compartment is full: remove the contents from the luggage compartment.  
11. Where applicable, remove the subwoofer Subwoofer.  
12. Remove the collapsible spare wheel, full-size spare wheel or compact spare wheel and the vehicle tool kit from the luggage compartment.  
13. Remove the wheel covers Wheel covers.  
WARNING  
Failing to heed this checklist that is provided for your own safety can cause accidents and serious injuries.  
Always follow the tasks in the checklist.  
Observe the general safety precautions.  
Wheel bolts  
Please read the introductory information and heed the Warnings and Notice ⇒  
Introduction.  
Two-piece wheel bolts  
Two-piece wheel bolts must be used. Two-piece wheel bolts have the bolt connected loosely to the head.  
Do not use single piece wheel bolts. If you are not sure which wheel bolts to use for your vehicle, consult an authorized Volkswagen dealer or authorized  
Volkswagen Service Facility. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Loosening wheel bolts  
336  
Fig. 202 Changing a tire: loosening the wheel bolts.  
Use a suitable lug wrench to loosen the wheel bolts.  
Only loosen the wheel bolts a few turns while the vehicle is not raised with the vehicle jack.  
1. Slide the lug wrench all the way onto the wheel bolt fig. 202.  
2. Hold the end of the lug wrench and turn the wheel bolt about one turn counterclockwise  
.
Or: if a wheel bolt cannot be loosened, carefully press on the end of the lug wrench using your foot. Hold onto the vehicle firmly while doing this and make sure  
you have secure footing.  
Wheel bolt tightening specification  
Tightening specification for wheel bolts in steel and aluminum alloy rims:  
88 ft-lbs (120 Nm).  
Wheel bolts that are corroded and difficult to turn must be replaced and the threads in the wheel hub must be cleaned before checking the tightening torque.  
Never grease or oil the wheel bolts and the threads in the wheel hub.  
Check the tightening torque using a functioning torque wrench immediately after changing a wheel.  
WARNING  
Wheel bolts that are tightened incorrectly can loosen while driving and cause accidents, serious injuries, and loss of vehicle control.  
The wheel bolts and threads in the wheel hub must be clean, easy to move, and free of oil and grease.  
Always use only the lug wrench to loosen and secure the wheel bolts that have been attached to the vehicle at the factory.  
Only loosen the wheel bolts about one turn while the vehicle is not lifted with the jack.  
Never grease or oil the wheel bolts and the threads in the wheel hub. Even when tightened to the specification, they could become loose while driving.  
Never loosen the bolts on rims with a bolted rim ring.  
Check the tightening torque regularly with a torque wrench. If the wheel bolts are not tightened enough to meet the specification, the wheel bolts and rims  
could come loose while driving. Exceeding the tightening specification could damage the wheel bolts and threads.  
WARNING  
Incorrect wheel bolts can loosen while driving and cause accidents, serious injuries, and loss of vehicle control.  
Only use wheel bolts that are intended to be used with the rim.  
Never use different wheel bolts.  
Use only two-piece wheel bolts on vehicles with two-piece wheel bolts.  
Subwoofer  
Please read the introductory information and heed the Warnings and Notice ⇒  
Introduction.  
337