Heating and air conditioning -> Manual AC controls for Your Volkswagen Beetle 4 Door Third Generation (2012-2019)

Manual AC controls  
Fig. 109 In the center console: Manual AC controls.  
Please first read and note the introductory information and heed the WARNINGS  
..  
Press the corresponding button to switch a function on or off. If a function is switched on, an indicator  
light in the button comes on. To switch off a function, press the button again.  
Buttons, knobs  
More information: Manual AC ⇒ꢀfig. 109  
Turn knob to set the desired temperature. The MA X position provides maximum  
cooling output. Recirculation mode and the cooling system switch on  
automatically.  
Temperature  
1
... ꢀ  
Fan (2)  
...  
Setting 0: the fan and manual AC are switched off.  
Setting 4: highest fan speed.  
Air distribution  
(3)  
Direct airflow by turning knob to any setting (continuously adjustable).  
Defog/defrost: Airflow is directed to the windshield. Recirculation mode switches  
off automatically in this position. Increases the fan speed to clear the windshield  
as quickly as possible. The cooling system switches on automatically to  
dehumidify the air.  
Air distribution to the air vents in the instrument panel.  
Air distribution to the footwells.  
Air distribution to the windshield and footwells.  
Rear window defroster: Works only when the engine is running and switches off  
automatically after 10 minutes or less.  
Air recirculation mode..  
Buttons for seat heating.  
,
Press the button to switch the air conditioner on or off.  
ꢆꢇꢈ  
Buttons, knobs  
More information: Manual AC fig. 109  
Turn fan switch to position 0.  
Switching off.  
WARNING  
Stale air causes driver fatigue and reduces alertness, which can cause accidents, collisions,  
and serious personal injury.  
Never switch off the fan for a long time because no fresh air will enter the passenger  
compartment.  
Air conditioner operation  
Please first read and note the introductory information and heed the WARNINGS  
..  
The air conditioner works only when the ignition is switched on. The cooling system for the passenger  
compartment works only when the engine is running and the fan is on.  
The air conditioner is most efficient when the windows and the power sunroof are closed. If the vehicle  
is stationary and the passenger compartment becomes very hot due to sunlight, briefly opening the  
windows and the power sunroof may speed up the cooling process.  
Keep the air intake slots in front of the windshield free of ice, snow, and leaves so that the heating and  
ventilation systems can work properly.  
Settings for optimum visibility  
When you switch on the cooling system, both the temperature and humidity in the vehicle are reduced.  
This will help make passengers feel more comfortable and help keep the windows from fogging up.  
Switch off air recirculation..  
Set the fan to the desired speed.  
Turn the temperature knob to the center position.  
Open and adjust all air vents in the instrument panel..  
Turn the air distribution knob to the desired setting.  
Push the ꢆꢇꢈ button to turn on the air conditioner. The indicator light in the button lights up.  
Heating  
Maximum heating output and defrosting performance are not possible until the engine has reached  
operating temperature.  
Air conditioner does not work  
The air conditioner may not switch on for one of the following reasons:  
The engine is not running.  
The fan is switched off.  
The air conditioner fuse has blown.  
The outside air temperature is colder than about +38 °F (+3 °C).  
The air conditioner compressor has been temporarily switched off due to excessive engine coolant  
temperature.  
There is another malfunction in the vehicle. Have the air conditioner checked by an authorized  
Volkswagen dealer or authorized Volkswagen Service Facility.