The vehicle tool kit is in the luggage compartment in one of several places, such as under the luggage
compartment floor panel.
ꢀ
ꢀ
Open the rear hatch.
Lift the floor panel by the handle and hang it on the hook beneath the luggage compartment cover
⇒ꢀfig. 135 (1).
Completely retract the jack after use. Otherwise it will not fit in its compartment and cannot be
stowed safely.
Contents
Fig. 136 Contents of the vehicle tool kit.
ꢀ Please first read and note the introductory information and heed the WARNINGS
..
The contents of the vehicle tool kit depend on the vehicle configuration. The following describes the
maximum contents.
Contents of the vehicle tool kit ⇒ꢀfig. 136
(1)
Screwdriver with a hexagonal socket in the handle for removing or inserting previously
loosened wheel bolts. The screwdriver blade is reversible. The screwdriver may be stored
under the lug wrench. For vehicles with a subwoofer in the luggage compartment, the tool kit
contains a Torx bit for the screwdriver. Use the screwdriver with the Torx bit to remove or install
the subwoofer screws.
(2)
Adapter for anti-theft wheel bolts. Volkswagen recommends that you always carry the adapter
for the wheel bolts in the vehicle along with the vehicle tool kit. The code number of the wheel
bolt lock is imprinted on the front side of the adapter. If lost, a replacement adapter can be
ordered using this number. Record the code number of the wheel bolt lock and store it
separately from the vehicle.
(3)
(4)
(5)
Screw-in towing eye.
Hubcap puller clip for removing hubcaps, wheel covers, or wheel bolt caps.
Jack. Before putting the jack back in the foam insert, be sure to completely crank the jack down
to its original position.
(6)
(7)
Lug wrench.
Crank.
English 
