Changing the wiper blade for the rear window
Fig. 2 At the rear of the vehicle: Changing the rear window
wiper blade.
1
Release button.
1. When lifting a wiper arm, hold itonly in the area of the wiper blade mounting.
2. Lift and fold back the wiper arm.
3. Press and hold the release button→ Fig. 2
1
.
A
4. Tilt the wiper blade in the direction of the wiper arm→ Fig. 2
B
at the same time. You may need to use some force to do this.
and pull it off in the direction of the arrow
5. Insert a new wiper blade with thesame length and designonto the wiper arm in the opposite direction of the
B
arrow → Fig. 2
and push it on until it engages. The wiper blade must be in folded-down position to do this
A
.
6. Carefully place the wiper arm back onto the rear window.
WARNING
Worn or dirty wiper blades reduce visibility and increase the risk of accidents and severe injuries.
● Always change windscreen wiper blades if they are damaged or worn and no longer clean the windscreen
properly.
NOTICE
Damaged or dirty windscreen wipers can scratch the windscreen.
● Do not use any detergents containing solvents, hard sponges or other sharp objects, as they can damage the
graphite coating of the wiper blades during cleaning.
● Do not use nail varnish remover, paint thinner or similar products to clean the windows.
Introduction
Before changing bulbs, check whether a bulb or anLED
light unit has failed. You can normally change bulbs yourself. If the exterior lighting is realised using LED technology
(depending on model and vehicle equipment), it is not possible for you to change theLED light units or individual
LEDs yourself. If some LEDs fail, this may be an indication that moreLEDs are on the point of failure. In this case,
have the light units checked and renewed if necessary at a suitably qualified workshop.
You should keep a box with spare light bulbs for the lights that ensure the vehicle is roadworthy in the vehicle at all
494
English 