Get Instrument cluster -> Driving data display (multifunction display) Guide for Volkswagen California Van Third Generation (2015-2024)

Driving data display (multifunction display)

The driving data display(multifunction display) shows various travel and fuel consumption data.

Different driving data can be selected depending on the vehicle equipment level. The driving data displayed depend

on the current driving behaviour, the vehicle status (e.g. particulate filter regeneration) and the current driving

situation (e.g. urban traffic, motorway journeys). The driving data are calculated as an average value over sections of

varying length. Consequently, the value currently displayed may differ from the actual average value.

Switching between displays

1. Vehicles with multifunction steering wheel:

Press the or button.

1. Vehicles without multifunction steering wheel:

Press the rocker switch

on the wiper lever.

Switching memory

1. Vehicles with multifunction steering wheel:

Press the button.

1. Vehicles without multifunction steering wheel:

Press the

button on the wiper lever.

Since start memory

The memory collects travel and consumption data from the moment the ignition is switched on until it is switched

off. The memory will be deleted if the journey is interrupted for more than two hours.

Since refuelling memory

Display and storage of the collected driving and consumption values. The memory is deleted when the tank is refilled

Long-term memory

The memory records driving data for up to 19 hours and 59 minutes or 99 hours and 59 minutes of driving time or

1999.9 km (mi) or 9999 km (mi) distance covered. The memory is deleted if one of these maximum values is

exceeded. The maximum values vary depending on the instrument cluster version.

Deleting driving data memories

Select the memory that you wish to delete.

1. Vehicles with multifunction steering wheel:

Press and hold the

1. Vehicles without multifunction steering wheel:

Press and hold the button in the wiper lever for approximately 2 seconds.

button for approximately 2 seconds.

Setting the speed warning

1. Vehicles with multifunction steering wheel:

Select the displayWarning at --- km/h or Warning at --- mph.

2. Press the

button on the multifunction steering wheel to save the current speed and activate the warning.

3. Set the speed within approximately 5 seconds using the and buttons on the multifunction steering wheel.

4. Press the

The speed is now saved and the warning is activated.

5. To deactivate, press the button on the multifunction steering wheel again.

button on the multifunction steering wheel or wait for a few seconds.

The stored speed will be deleted.

1. Vehicles without multifunction steering wheel:

Select the displayWarning at --- km/h or Warning at --- mph.

2. Press the

button on the wiper lever to save the current speed and activate the warning.

3. Within approximately 5 seconds, set the speed using the rocker switch

on the wiper lever.

4. Press the

button on the wiper lever again or wait for a few seconds.

The speed is now saved and the warning is activated.

5. To deactivate, press the

button on the wiper lever again.

The stored speed will be deleted.

The warning can be set for speeds from 30 km/h(18 mph) to 250 km/h (155 mph).

In some markets, a single acoustic warning is given at speeds above 80 km/h(approx. 50 mph) and a continuous

warning tone sounds above 120 km/h (approx. 75 mph). This warning is a legal requirement and cannot be changed.

Selecting the displays

You can select which driving data you want to display in the vehicle settings in the Infotainment system (→ Vehicle

settings menu).

Average speed display

The average speed is displayed after around 100 m(around 328 ft). The display will show dashes until this point.

Consumption display

The average fuel consumption is displayed after around 300 m(around 984 ft). The display will show dashes until this

point.

Fuel range display

Approximate calculation of the distance that the vehicle can still travel in km(miles) if the same driving style is

maintained.

SCR range or Range display

Approximate calculation of the distance in km(miles) that the vehicle can still travel with the current AdBlue® level if

the same driving style is maintained. Depending on the equipment, the display only appears when the remaining

range is around 2,000 km (approximately 1243 miles) or 2,400 km (around 1491 miles) and cannot be deselected.

Instrument cluster -> Driving data display (multifunction display) for Your Volkswagen California Van Third Generation (2015-2024)

Related Topics

Instrument cluster

Popular Owner Manuals

Latest Owner Manuals