Deactivating the memory function in the vehicle key
1. Press the
button and then keep it pressed till the end of the deactivation process.
2. Keeping the memory button pressed, simultaneously press the button on the vehicle key within ten seconds.
An acoustic signal will sound to confirm deactivation.
Personalisation
You can save and access your individual seat setting in a user account via the personalisation function
(→ Personalisation).
After switching off the ignition and locking the vehicle, the driver seat and exterior mirror settings are stored in the
user account.
The driver seat settings are restored after the vehicle is unlocked and the driver door is opened.
The seat responds to selecting or changing a user account as follows:
—Vehicle stationary or moving no faster than 5 km/h(3 mph): Seat is moved. You can cancel the movement at any
time by touching the appropriate function button in the Infotainment system or by pressing a button on the driver
seat.
—The vehicle speed is higher than 5 km/h(3 mph): Seat is not moved. All other setup configurations are adopted.
WARNING
Incorrect use of the seat functions can cause serious injuries.
● Always assume the correct sitting position before the start of the journey and maintain this position during the
journey. This also applies to all passengers.
● Adjust the memory function only when the vehicle is stationary.
● Keep hands, fingers, feet and other body parts away from seat’s moving parts and adjustment range.
If you open the driver door later than approximately 10 minutes after unlocking the vehicle, the driver seat is
not automatically adjusted.
Some settings can be stored in the user accounts of the personalisation function and therefore change
automatically when the user account changes (→ Personalisation).
Switching turn signals on and off
Fig. 1 On the left-hand side of the steering column: Turn
signal and main beam lever
139
English 