Qi-capable mobile telephones with larger dimensions cannot be charged wirelessly.
Before charging, remove any foreign objects with metallic components such as coins from the stowage compartment
and observe the operating instructions for the mobile telephone.
To charge a Qi-enabled mobile telephone, remove the protective cover and place the entire surface of the suitable
mobile telephone flat in the centre of the stowage area with the display facing upwards. The charging process will
start automatically.
The factory-fitted Infotainment system will provide information about the start of the charging operation and, where
applicable, about any foreign objects with metallic components that are detected in the stowage compartment.
Remove foreign objects immediately.
If the mobile telephone has not been placed correctly or its dimensions are too large, it cannot be detected or
detected correctly. The Infotainment system may report that there is a foreign object on the shelf. The fault can be
rectified if a suitable mobile telephone is used and its position is corrected.
Stowage compartment cover
Depending on equipment and country, the stowage compartment for the wireless charging function has a cover for
the mobile telephone’s display.
Always place only one mobile telephone with maximum dimensions(width x length) of 80 mm x 140 mm
(3.15 in x 5.512 in) in the stowage compartment with the cover in accordance with the specifications.
The cover can avoid distractions caused by the mobile telephone, such as incoming messages.
The cover must always remain closed when driving and the mobile telephone display must be fully covered.
WARNING
Notifications on the mobile telephone display can distract the driver and increase the risk of a serious accident.
● Only ever place one suitable mobile telephone, Qi-enabled as required, without a protective cover and with
maximum dimensions (width x length) of 80 mm x 140 mm (3.15 in x 5.512 in) flat on the shelf in the stowage
compartment, as per the specifications.
● Remove any items that prevent the cover from closing.
● Keep the cover closed at all times while the vehicle is in motion.
WARNING
Do not place any metal objects or items with metallic components on the wireless charging pad. Metallic objects
may become very hot. This may cause burn injuries to the skin and cause a fire.
NOTICE
Do not place any ID cards, credit cards etc. with magnetic strips or with a chip on the wireless charging pad. The
data stored on the magnetic strip or chip may become unusable.
Drawers under the 3-seat bench
Fig. 1 Under the 3-seat bench: drawers.
There are three drawers in the 3-seat bench, which can be accessed from the front and from the rea→r Fig. 1.
287