Cover of rail system
Fig. 1 In passenger compartment: view of seat rails from
above.
Removing plastic covers
The plastic covers must be removed from the seat rails, if seats or the centre table are to be installed or removed.
1. Take the screwdriver from the vehicle toolkit.
2. Insert the flat blade of the screwdriver into the seat rail at an angle in front of the plastic cover you wish to
1
remove → Fig. 1
.
3. Press the cover lug approx. 3 mm to the front and, at the same time, lever it out.
Removing split cover rail
1. The aluminium cover rail consists of two parts.
2. Press the middle of the aluminium cover rail with the flat of your hand.
2
3. Slide the aluminium cover rail in the direction of the arrow→ Fig. 1
4. Slide the opposite part of the aluminium cover rail in the direction of the arrow and remove it.
5. Repeat this procedure for all seat rails.
and remove it from the guide.
Installing split cover rail
1. Fit the aluminium cover rail so that it is flush with the fixed part of the cover rail.
2. Press the aluminium cover rail from above into the guide rail and slide it onto the fixed part of the cover rail.
3. Repeat this procedure for all seat rails.
Installing plastic covers
449
English 