Displays
When the cruise control system is switched on, the instrument cluster display shows the stored speed and the status
of the cruise control system.
Depending on the driving situation and the instrument cluster version, one of following indicator lamps lights up:
Cruise control system switched on.
Cruise control system switched on, control active.
Cruise control system switched on, control active.
The indicator lamps are shown as small icons or are greyed out if the cruise control system is not regulating.
If no speed is stored, the instrument cluster display shows
instead of the speed.
Changing gear
Cruise control is interrupted as soon as you press the clutch pedal and is resumed automatically after the gear
change.
Driving downhill
The vehicle cannot maintain the stored speed in all driving situations. Always be prepared to brake the vehicle.
1. Shift down before extended downhill stretches.
In this way you will make use of the engine braking effect and relieve the load on the brakes.
WARNING
The use of the cruise control system can lead to accidents and serious injuries if traffic does not allow you to drive at
a safe distance from the vehicle in front at a constant speed. The speed limiter does not relieve the driver of their
responsibility for the speed of the vehicle.
● Adapt your speed and distance from the vehicles ahead to suit visibility, weather, road and traffic conditions.
● Never use the cruise control system in heavy traffic, if the distance to the vehicles in front is insufficient, on steep
or winding roads, on slippery road surfaces (e.g. due to snow, ice, wet roads, loose chippings)or on flooded roads.
● Never use the cruise control system when driving off-road or on unpaved road surfaces.
Operating the cruise control system via the multifunction steering wheel
Fig. 1 Left-hand side of the multifunction steering wheel.
232