Driving data display for Your Volkswagen California Van Fourth Generation (2024-2025)

Driving data display (multifunction display)  
The driving data display(multifunction display) shows various travel and fuel consumption data.  
Different driving data can be selected depending on the vehicle equipment level. The displayed driving data depends  
on the current driving behaviour, the vehicle status (e.g. particulate filter regeneration) and the current driving  
situation (e.g. urban). The driving data is calculated as an average value over sections of varying length.  
Consequently, the value currently displayed may differ from the actual average value.  
Switching between displays  
1. Vehicles with multifunction steering wheel:  
Press the or button.  
1. Vehicles without multifunction steering wheel:  
Press the rocker switch  
on the wiper lever.  
Switching memory  
1. Vehicles with multifunction steering wheel:  
Press the button.  
1. Vehicles without multifunction steering wheel:  
Press the  
button on the wiper lever.  
Since start memory  
The memory collects travel and consumption data from the moment the ignition is switched on until it is switched  
off. The memory will be deleted if the journey is interrupted for more than two hours.  
Since refuelling memory  
Display and storage of the collected driving and consumption values. The memory is deleted when the tank is  
refilled.  
Long-term memory  
The memory records driving data for up to 19 hours and 59 minutes or 99 hours and 59 minutes of driving time or  
1999.9 km (mi) or 9999 km (mi) distance covered. The memory is deleted if one of these maximum values is  
exceeded. The maximum values vary depending on the instrument cluster version.  
Deleting driving data memories  
1. Select the memory that you wish to delete.  
2. Vehicles with multifunction steering wheel:  
Press and hold the  
button for approximately 2 seconds.  
1. Select the memory that you wish to delete.  
2. Vehicles without multifunction steering wheel:  
Press and hold the  
button in the wiper lever for approximately 2 seconds.  
39  
Setting the speed warning  
1. Vehicles with multifunction steering wheel:  
Select the displayWarning at --- km/h or Warning at --- mph.  
2. Press the  
button on the multifunction steering wheel to save the current speed and activate the warning.  
3. Set the speed within approximately 5 seconds using the and buttons on the multifunction steering wheel.  
4. Press the  
The speed is now saved and the warning is activated.  
5. To deactivate, press the button on the multifunction steering wheel again.  
button on the multifunction steering wheel or wait for a few seconds.  
The stored speed will be deleted.  
1. Vehicles without multifunction steering wheel:  
Select the displayWarning at --- km/h or Warning at --- mph.  
2. Press the  
button on the wiper lever to save the current speed and activate the warning.  
3. Within approximately 5 seconds, set the speed using the rocker switch  
on the wiper lever.  
4. Press the  
button on the wiper lever again or wait for a few seconds.  
The speed is now saved and the warning is activated.  
5. To deactivate, press the  
button on the wiper lever again.  
The stored speed will be deleted.  
The warning can be set for speeds from 30 km/h(18 mph) to 250 km/h (155 mph).  
In some countries, a single acoustic warning is given at speeds above 80 km/h(around 50 mph) and a continuous  
warning tone sounds above 120 km/h (around 75 mph). This warning is a legal requirement and cannot be changed.  
Selecting the displays  
You can select which driving data you want to display in the vehicle settings in the Infotainment system (→ Vehicle  
settings menu).  
Average speed display  
The average speed is displayed after around 100 m(around 328 ft). The display will show dashes until this point.  
Consumption display  
The average fuel consumption is displayed after around 300 m(around 984 ft). The display will show dashes until this  
point.  
Fuel range display  
Approximate calculation of the distance that the vehicle can still travel in km(miles) if the same driving style is  
maintained.  
SCR range or Range display  
Approximate calculation of the distance in km(miles) that the vehicle can still travel with the current AdBlue® level if  
the same driving style is maintained. Depending on the equipment, the display only appears when the remaining  
40