Vehicles without multifunction steering wheel:
1. Switch on the ignition.
1
2. Press the
displayed.
→ Fig. 2
button, several times if required, if a message or the vehicle pictogram is
2
3. Tap and hold the rocker switch
→ Fig. 2
to display the menus (→ Digital instrument cluster) or to
return to the menu selection from a menu or an information display.
4. To browse through the menus, press the rocker switch up or down.
1
5. To open the menu or information display shown, press the
or information display opens automatically after a few seconds.
button → Fig. 2
or wait until the menu
Making settings in menus
Vehicles with multifunction steering wheel:
1. Press the arrow buttons or → Fig. 1 in the displayed menu until the desired menu option is highlighted.
A frame appears around the selected option.
2. Press the
button → Fig. 1 to make the required changes.
A tick indicates that the relevant function is switched on.
Vehicles without multifunction steering wheel:
2
1. In the menu displayed, press the rocker switch
until the desired menu option is marked.
→ Fig. 2
on the wiper lever upwards or downwards
A frame appears around the selected option.
1
2. Press the
button → Fig. 2
to make the required changes.
A tick indicates that the relevant function is switched on.
Returning to the selection menu
Vehicles with multifunction steering wheel:
1. Press the or → Fig. 1 button.
Vehicles without multifunction steering wheel:
1. Select the Back menu option.
Button
on the multifunction steering wheel
The button
→ Fig. 1 allows you to change between the classic view of the round instruments, the large view
without information profiles and the extended view with highlighted information profiles. The classic view shows the
large round instruments on the right and left and the selected information profile in the middle.
1. Press and hold the
→ Fig. 1 button to select from the list of preset information profiles:
22
English 
