Memory function
Fig. 1 On the driver seat: Memory buttons.
The memory buttons can be used to store and recall settings for the driver seat.
Individual settings for the driver seat can be assigned to each of the three memory buttons.
Storing the driver seat settings
1. Apply the handbrake firmly.
2. Put the gearbox into neutral.
3. Switch on the ignition.
4. Adjust the driver seat.
5. Press the
button for longer than one second.
6. Within approximately 10 seconds press the memory button you wish to use. An acoustic signal confirms that
the settings have been stored.
Retrieving the driver seat settings
1. Within ten minutes after the vehicle has been unlocked, briefly press the respective memory button while the
driver door is opened and the ignition is switched off.
Or: with the driver door closed or ignition switched on, press and hold the corresponding memory button until
the stored position has been attained.
Memory function of the vehicle key
Each time the vehicle is locked, the current position of the driver seat is stored and assigned to the used vehicle key.
When the driver door is opened, the driver seat is moved automatically to the position which has been stored for the
respective vehicle key. If one vehicle is used by two people, we recommend that each person always uses their “own”
vehicle key.
The memory function of the vehicle key uses its own memory and has no effect on any settings which are assigned to
a memory button.
Activating the vehicle key memory function
1. Unlock the driver door.
2. Press the desired memory button 1 , 2 or 3 and keep it pressed until the end of the activation process.
3. If required, keep the memory button pressed until the saved seat position is reached.
4. Keeping the memory button pressed, simultaneously press the button on the vehicle key within ten seconds.
133
English 