Get Service interval display Guide for Volkswagen California Van Fourth Generation (2024-2025)

1. Select the Copyright menu.

Service interval display

Service events are displayed on the instrument cluster and in the Infotainment system.

Versions and displays can vary as different versions of the instrument cluster and Infotainment system are available.

The service takes place at predefined intervals for vehicles with a fixed oil change service interval.

The service intervals are calculated on an individual basis for vehicles with flexible oil change service interval. An oil

change service must only be carried out when required by the vehicle. The individual conditions in which the vehicle

is used and the driver's personal driving style are taken into account. The service reminder is displayed 30 days before

the service is due. The distance is rounded to the nearest 100 km and the remaining time is rounded to full days.

Service alert

If an oil change service or inspection is due soon, a service alert will appear the next time the ignition is switched on.

The mileage or time shown corresponds to the maximum mileage or time that can still be driven before the next

service.

Service event

For a scheduled oil change or a scheduled inspection, an acoustic warning will sound when the ignition is switched on

and the spanner symbol

will be displayed for several seconds on the instrument cluster display. One of the

following displays will also appear:

—Inspection now!

—Oil service now!

—Oil service and inspection now!

Accessing service schedules

You can access the current service schedule when the ignition is switched on, the engine is not running, and the

vehicle is stationary:

Accessing service schedules in the Infotainment system:

1. Depending on the version, press the button or function button

Infotainment system.

and open theVehicle menu in the

Or: Depending on the version, press the button or function button

2. Depending on the version, open theSettings menu.

3. Select the Service menu option to display the service information.

Accessing service schedules in the analogue instrument cluster:

1. Tap and hold the button in the instrument cluster until the wordService appears in the display.

2. Release the button.

The current service appointment will be shown in the display.

Accessing service schedules in the digital instrument cluster:

1. You can retrieve the Service date only via the Service menu (→ Service menu).

Resetting the service interval display

If the service interval display was not reset after a service or inspection, it can be reset as follows:

Vehicles with analogue instrument cluster:

1. Switch off the ignition.

2. Tap and hold the button in the instrument cluster.

3. Switch on the ignition again.

4. Release the

button if one of the following words appears on the instrument cluster display:Reset oil change

service? or Reset inspection service?.

5. Press the

button on the instrument cluster as confirmation.

Vehicles with digital instrument cluster:The service interval display can only be reset via the Service menu (→ Service

menu).

Do not reset the service interval display between service intervals, otherwise incorrect data may be shown.

If the oil change service interval was reset manually, the service interval display then also changes to a fixed service

interval in vehicles with flexible oil change service.

The service message disappears after a few seconds when the engine is running or when the message is

confirmed in the instrument cluster.

If the 12-volt vehicle battery was disconnected for long periods in vehicles with flexible service intervals, the

system cannot calculate the time at which the next service is due. The information shown in the service

interval display may therefore be incorrect. If this is the case, then please observe the maximum service

intervals.

Time

Setting the time via the digital instrument cluster

1. Select the Range information profile.

2. Press and hold the

button on the multifunction steering wheel for 5 seconds and then release.

The service menu is shown on the instrument cluster display.

3. Select the Time menu.

4. Set the correct time with the arrow button or

Setting the time via the analogue instrument cluster

1. Press the

button in the instrument cluster to set the time on all clocks in the vehicle.

The time is shown in the instrument cluster display and the hour setting is marked.

2. Press the

button repeatedly until the desired number of hours is displayed. Press and hold the button to

scroll through quickly.

3. Once you have set the hours, press the

button again to select the minutes display.

4. Press the

button repeatedly until the desired number of minutes is displayed. Press and hold the button

to scroll through quickly.

5. Release the

button to finish setting the time.

Service interval display for Your Volkswagen California Van Fourth Generation (2024-2025)

Popular Owner Manuals

Latest Owner Manuals