Folding table in the side panel
Fig. 1 In the rear side panel: Cover for the folding table.
Fig. 2 Fully assembled folding table
A folding table may be located in the side panel opposite the sliding door.
The folding table isstowed when it is in its retainer behind the side panel and the cover is securely engaged.
Assembling the folding table
1. Fold the cover out by the handle→ Fig. 1 in the direction of the arrow.
2. Use the handle to lift the folding table up and out and pull the table down until it stops in the horizontal
position.
3. To extend the folding table, fold the top section of the table back in the direction of the arrow→ Fig. 2.
Stowing the folding table
1. Fold back the table extension, if in use.
2. Use the handle to pull up the folding table and guide the table down into its retainer in the side panel.
3. Press the cover in the opposite direction to the arrow→ Fig. 1 until it engages securely.
NOTICE
● The opened folding table can carry a maximum of 20 kg. If this weight is exceeded, the table top, bracket and side
trim panel could be damaged.
● Always guide the folding table down by hand and never let it drop to the horizontal position. The folding table
could otherwise be damaged.
287